Wick's also carries the exact AN part number for the pop rivet Dana lists. It is not listed in their catalog but they have it. As a matter of fact, they have a lot of things which are not in the catalog. Just ask and you may be surprised.
Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Dana Overall" <bo12...@hotmail.com> To: <kr...@mylist.net> Sent: Friday, August 13, 2004 5:57 AM Subject: RE: KR> solid pop rivets > >From: "Colin & Bev Rainey" <crain...@cfl.rr.com> > > > >AS&S and Wicks sell solid pop rivets, not much more than the standard > >rivets at Lowes > > > As I mentioned in the earlier post, I listed the exact AN pop rivet number > to suit the alum. thickness and sealability. The "solid" pop rivet looks > like a Lincoln hat so that when you pull the mandrel, which does not extend > through the head, you don't end up with a hole in the rivet. I'd be hard > pressed to believe Lowes would carry such an animal. Remember, the wheel > has already been invented:-) > > If you call Van's and give them the rivet number I listed, it'll show up at > your door with no problem. They are not just a supplier of metal airplanes, > they have a pretty nice selection of hardware. > > > Dana Overall > 1999 & 2000 National KR Gathering host > Richmond, KY i39 > RV-7 slider, Imron black, "Black Magic" > Finish kit > 13B Rotary. Hangar flying my Dynon. > http://rvflying.tripod.com/aero1.jpg > http://rvflying.tripod.com/aero3.jpg > http://rvflying.tripod.com/blackrudder.jpg > do not archive > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
