Mark I like the looks of your installation, but that would completely close off my luggage compartment behind the rear spar. I was thinking of mounting it between the 2 spars on a 1" x 2" reinforcement across the floor board. Could any one tell me if this will give me the strength that I will need to support the belly board? Ralph Snyder Burbank CA ralphnd...@juno.com
On Sat, 28 May 2005 16:54:49 -0500 "flykr2s" <flyk...@wi.rr.com> writes: > Ralph, > Check out my system, It works perfect. You should really have it > mounted to > the rear spar for strength. The front spar is too far forward. mine > is on > the front side of the rear spar. Here is a link to my details. > http://mywebpage.netscape.com/n886mj/bellyboard.html > > Mark Jones (N886MJ) > Wales, WI > > ----- Original Message ----- > From: "Ralph H Snyder" <ralphnd...@juno.com> > To: <kr...@mylist.net> > Sent: Saturday, May 28, 2005 4:34 PM > Subject: KR> Belly board mounting > > > > I want to mount the belly board between the front and rear spar. > I can't > > mount it behind the rear spar because that is my luggage > compartment. I > > searched 235 messages in the archives and only 2 were mounted > ahead of > > the rear spar. One was 4" behind the front spar and the other was > > somewhere in between the spars. > > Has someone mounted it in between the spars? How well did it work, > and > > how was the stability? > > Thanks for any information > > > > Ralph Snyder > > Burbank CA > > ralphnd...@juno.com > > > > _______________________________________ > > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > Ralph Snyder Burbank CA ralphnd...@juno.com
