I should add that I made my cable out of an old "parallel port extention cable" by chopping one end off and rewiring with a new connector. That guarantees at least one end is "factory good", and cuts down the workload a lot. You have to spend a little time correlating pins with wire colors, and of course double check when you're done, but you'd have to do that anyway. This only works if you're not carrying a lot of power through the power and ground wires, so I had to make my own radio connector because it required 20ga wire and the parallel cable was only 24 ga or so.
Mark Langford, Harvest, AL see homebuilt airplane at http://www.N56ML.com email to N56ML "at" hiwaay.net
