Absolutely they will. I have them and would not have it any other way. They are far superior to the RR hinge design. I was going to reply to this earlier but he specifically asked for your input. There are to many builders who think this KR building is rocket science. That simply is not the case.
Mark Jones (N886MJ) Wales, WI Visit my web site: www.flykr2s.com E-mail: flyk...@wi.rr.com ----- Original Message ----- From: "Mark Langford" <n5...@hiwaay.net> To: "KRnet" <kr...@mylist.net> Sent: Saturday, July 01, 2006 6:09 PM Subject: Re: KR> horizontal stab > John Godwin wrote: > >> Will the Dr Dean hinges work with your templates? > > Sure, one way or another. I haven't really looked at it, but as long as > the > gap seals and elevator and rudder noses are concentric with the center of > rotation of the bearing, it should work fine. That might mean that you > can't blindly follow the template as far as the profile of the gap seals > goes, but I would expect most folks to make sure they were going to get > the > desired effect. > > Mark Langford, Huntsville, Alabama > see KR2S project N56ML at http://home.hiwaay.net/~langford > email to N56ML "at" hiwaay.net > -------------------------------------------------------------- > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
