Allen, the mount,left to right inside to inside is 10 3/4" the bolt holes left to right c to c is 10 1/4". I have an extra corvair motor mount if anyone is interested contact me off line or phone 1-573-579-3147. Read page 94 of the WW manual on dim. for mount then compare that to the drawing on page103.
Mike Turner Jackson Missouri Swing the prop and light the fire, dance amoung the stars.........N642MC ----- Original Message ----- From: "Allen Wiesner " <flash...@usadatanet.net> To: "KRnet" <kr...@mylist.net> Sent: Wednesday, December 13, 2006 12:51 AM Subject: Re; KR>Engine Mount > >Just a couple of questions regarding the engine mount >>for a Corvair in a KR2S. >>1. The plans in WW's book seem to be misleading. The >>dimensions for the motor mount bolts are not clearly >>explained or I read them wrong. The book says 10.125 >>for the fore to aft distance from center bolt hole to >>center. However, the center bolt hole distance on the >>left to right bolts is given as 10.25. But, the >>impression given on the plans is that the sides of the >>tray are 10.25, not the center of the mounting bolts. >>So is that correct? Is it 10.250 from center bolt to >>center bolt or is that the inside dimension of the >>tray? Take a quick look at the plans and let me know. >>I finished my tray today and I went 10.25 from center >>bolt to center bolt. I hope I don't have to make >>another one. > > I just checked my block: > > Fore to Aft, center of hole to center of hole: 10.125" > > Left to Right, center of hole to center of hole: 10.250" > > Allen G. Wiesner KR-2SS/TD S/N 1118 > 65 Franklin Street > Ansonia, CT 06401-1240 > > (203) 732-0508 > > flash...@usadatanet.net > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
