Mike, I hope you take no offence to my suggestions or comments. I mean to judgment.
I find that many times when I get stuck on something that I simply need to step away for a little bit or get another set of eyes on it. I then commonly find some minor thing I over looked. In case like this I may find a solder joint that is cold or a solder pad that has lifted from the circuit board or even a zener diode that I inadvertently installed backwards. Let me know what you find. Jeff York KR-2 Flying N839BG Home page http://web.qx.net/jeffyork40/ My KR-2 http://web.qx.net/jeffyork40/Airplane/ to see my KR-2 Email jeffyor...@qx.net ----- Original Message ----- From: <mtmcgo...@aol.com> To: <kr...@mylist.net> Sent: Friday, January 19, 2007 11:22 AM Subject: Re: KR> Great Plains Strobe Kit > Jeff-----------It comes with a schematic and a pictorial layout. I will > check the solder joints again, and if it still does not work, I will send it to > you. > > Mike McGowan > N4288C > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html