If that's the worse mess up in life I'd say you're doing pretty good eye?
Cheers,

Charles Burkholder






----- Original Message ----- 
From: <aaronm...@aol.com>
To: <kr...@mylist.net>
Sent: Saturday, May 15, 2010 8:45 PM
Subject: KR> apology


My apology to you.
I inadvertently sent a message to you about 7:00 PM that  should have been
addressed to Daniel Heath who is a KRnet member at < _DanRH@Windstream.net_
(mailto:da...@windstream.net)  >. I have since sent a reply to Daniel's
inquiry.
 You can ignore my email to you but it was as follows just in case you were
thinking of forwarding the reply and to wondering to whom. It is the one
that read as follows:

Daniel Heath,
  Sounds like an instrument hookup perhaps?

Parker Hannifin and Swagelox have a lot of fittings.
A possible solution may be an elbow that has a male 1/4 inch flare fitting
on one end and then flare a short 1/4 inch tube, attach with ferrule and a
"B" nut and then slide a 1/4 inch inside diameter hose over the tube.
 An aircraft instrument shop may have what you need.
 I am guessing at your application but perhaps this may be of some help.
   I did read your recommendations on replies directly to the inquirer and
I messed up and apologize. Will be a bit more careful in the future.
Aaron Martin

_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html


-- 
Internal Virus Database is out-of-date.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.21.7/1328 - Release Date: 3/13/2008 
11:31 AM


Reply via email to