Google tapp plastics. They can fab just about anything you would like Sent from my iPhone
On Jan 20, 2011, at 4:38 PM, Dave Dunwoodie <ddunw...@fnwusers.com> wrote: > When all you get are blank stares when you ask about a bolt, you go to > the KR list, and here I am!!! > > I built a new panel for my KR2 using aluminum, covered by carbon fiber > for the face. It is VERY pretty, however because the CF is on top of > the instruments, one can see the rough edges of the holes cut into the CF. > > I have been searching for months to find a company (or someone) that can > cut some simple trim rings out of plastic, aluminum, etc. I'm coming up > dry. > > In a nutshell, the rings would be 2.25 or 3.125 ID, and about 1/8" wide, > and maybe a max. of 1/16" thick. Just precision cut rings out of some > cheap, black plastic would be excellent! > > Someone, somewhere knows of someone, somewhere, that can make nice cuts > in plastic that will give the panel the final touches. Just simple > rings that can be glued to the CF and cover the rough edges in it is all > that I'm trying to do. > > Can anybody help me? > > Thanks! > > Also, if anybody needs to see the pictures of where we are right now, > please advise and I'll send them to you. > > Dave > N1199P > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
