Sorry for asking a question before thinking longer about it. Don't worry, I will install the blocks. -Seth
On 10/30/2011 12:00 PM, Seth and Karen Jersild wrote: > Hi All, > > I'm getting close to inserting the spars into the fuselage. > > In the manual, page 28, it says "Check that the spars properly fit > within the wing rib outlines previously drawn onto each fuselage side. > When all checks are satisfactory, epoxy in position. Fit, glue and > install the 5/8" sq. glue blocks (8 each) to fuselage outer side skin > and spar. See drawing no. 1." > > Drawing no. 1 refers to the KR-2 layout plans (not "S") and does indeed > show blocks on the outside of the fuselage around the spars. However, > on the KR-2S plans (Drawing A) it does not show these blocks. > > I'm building an "S." Do I have to install these blocks? > > Any clarification would be appreciated! > > -Seth Jersild > jersi...@gmail.com > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
