Bendix shaft needs to be clean/lubricated.... ....Usual Maintenance failure point
----- Original Message ----- From: "Dan Heath" <[email protected]> To: "'KRnet'" <[email protected]> Sent: Sunday, March 25, 2012 8:32 AM Subject: KR> Engine Balancing Well, finally after discussions with Mark L. and the man from Dynavibe, and reading the manual again, all of it this time, I am making really good progress on getting the Corvair balanced. I got it down to .06 IPS at 2800 RPM yesterday but had to quit because the starter was just grinding on the ring gear. I thought the Bendix drive had gone bad, and it may have, but this morning I thought that it may have been because the battery is getting weak with all of this starting and no flying. So, I am going to the airport today to put the starter back on and charge the battery. Then tomorrow, I will know. Anyway, the process with the Dynavibe is working and I expect to get it to around .02 IPS at 2800. Then I will be a happy flyer and can start carrying weight to do the gross weight tests. Oh, I also have the Ifly720 installed in the panel and pics can be seen at: http://krbuilder.org/NewPanel/index.html See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on the pics See you at the 2012 - KR Gathering in Mt. Vernon, Il - MVN - 40th Anniversary There is a time for building and it is over. Daniel R. Heath - Lexington, SC http://www.krbuilder.org/MyUSA/ _______________________________________ Search the KRnet Archives at http://mylist.net/private/krnet/ to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html

