That explains it....the figures are just misleading. Thanks for the response. On May 9, 2012 6:13 PM, "Tony King" <tkin...@gmail.com> wrote:
> They definitely are female. It's an Aurora bearing MW-3 (equivalent > to Heim HF-3) and Aircraft Spruce list them for $5.75 each. The > Spruce site doesn't have a diagram of the Aurora part but they do for > the Heim equivalent. No doubt they'd be happy to confirm over the > phone or through their online chat before you buy. > > Cheers, > > Tony > > On 10 May 2012 08:55, jon kimmel <jkimme...@gmail.com> wrote: > > This has probably been discussed a hundred times, but I can't seem to > find > > the correct part number for Dr. Dean hinges. The write up I have lists > > mw-3 for the rod end bearings. The figure in the write up shows female > rod > > end bearings. Both aircraft spruce and wyck's describes mw-3 as a male > rod > > end bearing. I need to correct the damage done when the previous owner > let > > someone else demod the hinges...some are still there, some are missing. > > The remaining ones look like female rod end bearings. I don't want to > tear > > the ones remaining out just to verify a part number. Is mw-3 correct? > If > > not does anyone have the correct part number? > > > > Jon Kimmel > > kimm...@cox.net > > _______________________________________ > > Search the KRnet Archives at http://mylist.net/private/krnet/ > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > _______________________________________ > Search the KRnet Archives at http://mylist.net/private/krnet/ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
