I suppose I have to answer my own question and do the trig.
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Monday, July 23, 2012 7:52:50 PM
Subject: KR> AS5046-.75 wing construction -33"rib
KRnetters,
I measure 122.187"5 from the center line of my KR2S to the end of the
wooden spars where the 33 inch rib (AS5046-.75) is located.. The 33" template
reads 120.750" from center line of aircraft. I measured it in the flat ~
1.4375" longer
My question is..... should my measurement be closer to the 120.75"
after the 5" dihedral is made and accounted for? I assume the wing tip washout
will be something other than the plans if the wing span is increased by a few
inches. Am I on track?
Any insight and advice appreciated. thanks,Joe
_______________________________________
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
To UNsubscribe from KRnet, send a message to [email protected]
please see other KRnet info at http://www.krnet.org/info.html
