At 07:32 AM 11/23/2012, you wrote: >What is the aileron cable travel at the stick using the standard >aileron bellcrank? I am building dual sticks and need to get the >stick dims correct.Also what control cable are you using? Thanks Mark +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Use the same geometry as the single stick, i.e., same distance from pivot to cable attach point. It would be the same for a single or dual setup. Don't over build the assembly weight wise. Control forces on the KR are very light. I've seen photos of some assemblies that look like they were welded up with 1/8" wall pipe. The design that you see on Langford's site would be my choice but made up with aluminum. As for cable size, it is 3/16" as I recall. Someone verify that please. Larry Flesner
