How about 1/4" 4130 rod, threaded at each end to accept rod end bearings?..aileron bellcranks. -----Original Message----- From: Larry&Sallie Flesner Sent: Tuesday, December 18, 2012 9:18 PM To: KRnet Subject: Re: KR> aileron pushrod +ends
At 09:17 PM 12/17/2012, you wrote: >I need to get aileron pushrods and rod ends,does any place sell a >kit or do you order elerything separtly. Dean Choitz 7858108319 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Several other posts assumed you intend to use only pushrods for aileron control. If you are using the plans cable system and are looking for the pushrods and rod end bearings at the aileron bellcranks then you will be looking for something like the following: http://aircraftproducts.wicksaircraft.com/item/aircraft-controls/female-rod-end-bearings/cw-3b-14?&plpver=10&origin=keyword&by=prod&filter=0 You will want a 1/4" pushrod with a 3/16" bolt attaching the rod end bearings to the bellcrank and the aileron. A long 1/4" bolt with the head cut off and threaded will work. Larry Flesner _______________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
