I had my case welded inside and out when it was first discovered back in about '08. It lasted for a couple years, but eventually mirrored back through the welded area. I did the JB weld inside and out over and over with very short lived success'. I actually sent a case with Roy (3100 cc needs machine work) back in '11 and he had it ready for me in Spring of '12. I did not get out to pick it up until spring of '16 and started planning the rebuild at that time. It took the oil pressure drop to put my head in the game and geterr done... So the short answer would be if you are lucky enough to get a crack in your block, just tackle it right away. It really is not going to majiclly heal it's self. Joe Horton N357CJ ... building hours again
----- Original Message ----- From: "KRnet" <krnet@list.krnet.org> To: "KRnet" <krnet@list.krnet.org> Cc: laser...@juno.com Sent: Monday, November 27, 2017 2:55:00 PM Subject: KR> Engine Rebuild Completed Won't JB Weld seal a small crack in a case? I haven't had to do it - haven't had any cracks - but JB seems to work for everything that involves minor metal fixes? ____________________________________________________________ The Unusual Link Between Alzheimer's and Coconut Oil (Watch) Memory Repair Protocol http://thirdpartyoffers.juno.com/TGL3141/5a1c6de4da0546de4097cst03vuc _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
