Mark I think your right, I have designed the mounts so that they bolt through the re-enforced part of the fuselage. I am going to apply the fiberfrax sealer (adhesive) to the plywood and SS sheet then epoxy (T 88) the whole thing to the fuselage. The mounting bolts should hold the motor on.
On Fri, Jul 27, 2018 at 2:52 PM, Stef den Boer via KRnet < [email protected]> wrote: > Mike, 2 months ago I asked the same question. > After some comments from our kr friends this is how we did it. > Made the ss sheet including the holes. Sprayed the ss sheet wit glue. Just > glue spray from the local store. Placed the fibre frax over it so it is now > glued at the ss sheet. Removed the remaining fibre frax but 3 mm smaler at > the edge all around. Install the ss sheet including the fibre frax for > final. When it is aligned we sealed the edge (the 3mm) all around. > We have a good result with this method. > Stef > > > > Op 27 juli 2018 om 20:00 schreef Mike Arnold via KRnet < > [email protected]>: > > > > > > Hey KR 'ers how has everyone constructed their firewall? I have the > > plywood, fiberfrax, fiberfrax adhesive, and ss sheet. Is the fiberfrax > > adhesive enough to hold the SS sheet to the plywood or does it need T-88 > or > > something. Don't want to come apart. > > _______________________________________________ > > Search the KRnet Archives at https://www.mail-archive.com/ > [email protected]/. > > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to > change options. > > To UNsubscribe from KRnet, send a message to [email protected] > > Steph and his dad are building the KR-2S see http://www.masttotaalconcept. > nl/kr2 > > _______________________________________________ > Search the KRnet Archives at https://www.mail-archive.com/ > [email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
