Mark, Can you just recline the seat back a little more? I had to do that too, even with the 8" canopy lift on mine.
Dave M Nashua, NH > On October 10, 2019 at 4:32 PM Mark Jones via KRnet <krnet@list.krnet.org> > wrote: > > > Well I just came across my first major setback on this build. I sat in the > cockpit with the canopy on today and guess what...I don’t fit. My head is > slightly tilted and hits the canopy. WTF. I sure thought I had this all > measured out correctly. Must have been the root beer. The only remedy is to > lower the seat. This is going to require using a pushrod from the control > stick to a bell crank behind the rear spar and rerouting of the aileron > cables. Then I will reconstruct the seat bottom to allow my bottom to be > about one inch above the floor. Doing all this will give me the headroom I > need. > > Mark Jones > Oldsmar, Fl > > N771MJ “WunderBird” > www.flykr2s.com > flyk...@gmail.com > > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
