Congrats Luis! Your engine sounds like music to my ears! Have you tried the engine sound & behavior at full throttle as well?! I would rather hear the steady & nice sound at full throttle for an extended period of time! Any plans for the first take off during this coming weekend? I may be able to drive over to Dallas and to help recording your first flight on vedo....
cheers, Dr. Hsu On Tue, Jul 26, 2022, 11:18 PM Luis Claudio <dallasbori...@yahoo.com> wrote: > I finally got my engine to idle correctly without issues for the first > time. I built this engine three years ago after I purchased it from a Q2 > owner. I installed Revmaster 041 heads with stainless steel valves and then > put the engine aside while I finished my work on my airplane... move > forward three years and it was time to run the engine... Since I had > installed a dual electronic ignition, which gave me a lot of trouble to > install being that it was the third of its kind for a VW engine (Sam > Spanovich has one), that took over a month. the aerocarb that I purchased > about the same time as the engine, needed a lot of adjustments, I then > found that the engine valves were never adjusted properly (by muah), and I > found the right manifold loose. After a very frustrating three months of > chasing down problems... the results are in, I hope you enjoy this short > video > > KR2S Idles for the first time. <https://youtu.be/kDmH2QeHmvI> > > KR2S Idles for the first time. > > <https://youtu.be/kDmH2QeHmvI> > Luis R Claudio KR2S N8981S Dallas, Texas > >
-- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet
