-Jeff Scott
Arkansas Ozarks
--
Sent with GMX Mail app
Sent with GMX Mail app
On 4/18/26, 8:33 PM Phillip Matheson via KRnet <krnet@list.krnet.org> wrote:
Jeff and others. Thanks for your commentsI Got this message from the guy who fitted the high comp pistons I mentioned --- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnetPhil , The pistons are 9:1 high compression pistons from Lycon in California. They stuffed me around terribly originally supplying 12.5:1 pistons which cracked two cylinders from detonation when I had ordered 9:1!
Use the older recommended O200 rings- the ones with the oil control ring with the spiral spring in the groove. Without that spring you have massive oil losses.
Maybe some other company can supply them ?
Good luck.
Any had this problem?? And do you know the rings and oil ring mentioned above
Thanks
Phil Matheson.
Sent from my iPhoneOn 17 Apr 2026, at 22:19, Jeff Scott via KRnet <krnet@list.krnet.org> wrote:This kind of depends on which high compression pistons you used. In my O-200, I used the 8.5:1 O-200-D pistons. The O-200-D piston uses a Keystone ring for the top ring, which is only available from Continental at an incredibly high price. Rather than letting Continental hold me hostage, I machined the top ring land to fit the O-200-A ring and used the stock O-200-A rings. That worked well and as far as I know, the new owner is still flying with this configuration.
I built another engine using 9:1 pistons from Combustion Technology. Those pistons used the stock O-200-A rings. So far, no problems with them, although they don't have very many hours on them. They also made 10:1 pistons that used the O-200-A ring set. Combustion Technology pistons are no longer available as the owner retired and nobody bought the business.
Light Speed Aero also makes high compression pistons for the O-200. I believe theirs are 10:1 pistons as well and use the stock O-200-A ring set. He insists that you must have new cylinders before he will sell the pistons.
The only other high compression pistons are to use the C-85 pistons, then machine a bevel in the tops of the pistons to fit. That piston also uses the same ring set as the O-200-A and comes out to something like 8.5 or 8.7:1 compression.
The tall dome on your pistons suggests they are 10:1 pistons. The two manufacturers that I know that made 10:1 pistons both used the O-200-A ring set.
-Jeff Scott
Arkansas OzarksSent: Thursday, April 16, 2026 at 3:51 AMFrom: "Phillip Matheson via KRnet" <krnet@list.krnet.org>To: "Mustang Group" <mustangaero@groups.io>, "KRnet" <krnet@list.krnet.org>Cc: "Phillip Matheson" <phillipmatheson@bigpond.com>Subject: KRnet> High Comp pistons 0200I have a set I removed from my engine , 6 months ago? due to low compression in # 4. I found broken 2nd comp ring and top rib stuck in ring land. Also another piston had stuck rings. Photo before and after cleaning today, with hope of refitting in my new cylinders.-Wondering if a many have used these with success? - or failure??Also did you use standard 0200 rings and stated on line,- What problems have you had?- any oil consumption or oki leak problemsThanksPhil mathesonSent from my iPhone--KRnet mailing listKRnet@list.krnet.orghttps://list.krnet.org/mailman/listinfo/krnet--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
-- KRnet mailing list [email protected] https://list.krnet.org/mailman/listinfo/krnet

