Hello to all on the list,

More to follow later, but I wanted to shout out to Luis for his assistance and 
teaching me how to do the valve adjustments.  I really enjoyed doing the work 
on Saturday and learning it all.  Thats me in the picture that Luis sent out 
earlier, cleaning the gasket surface on one of the valve covers.  After doing 
the valves, new gaskets, new 4 plugs, checking oil and new battery, verified 
empty fuel.  3 gallons of LL100, jump in cockpit and turn on master.  Observed 
all electrical and the radio, the few lights and voltage all looked good.   
Imagine my disappointment when it seemed the engine was going to catch and it 
didn’t.  3 or 4 more attempts with waits in between, still nothing.  We were 
going to call it for the day.  I looked over the choke and throttle carefully 
and to ensure I had the positioning and operation correct.  Decided for one 
last attempt.  This time, set choke at half and throttle at about 1/4.  Nothing 
happening as I cranked.  Slowly moved throttle to more open and noted a change 
in engine sound at about 1/2.  About 2 prop spins later it coughed and started. 
 Rough at first, so I removed the choke.  Engine immediately smoothed out and 
ran up to 2000.  I let it sit for a second or two and then worked it down all 
the way to about 800.   Smooth as butter.  No valve sounds are anything.  I was 
grinning like a Cheshire Cat.  Shut it down.  Will try the different mag and 
distributor combinations in future.  Also need to figure out the intercom as I 
have a switch on the panel but no plugs evident for a headset.

Next plans, trace and label everything and taxi practice without wings..  It 
will be like learning to taxi the free catering nose on the T-34 I trained on 
in the Navy.  Some minor hangar rash repair caused in transport.  Re install 
wings and cowls.  General cleaning, new tires and complete the conditional 
including flight flight controls, weighing and new weight and balance. 
Somewhere in there I need to get a BFR as well.

The aircraft is set up purely as day VFR.  First order of business is to 
procure a solution for transponder and ADSB both in and out.  (If anyone has a 
unit or the necessary boxes that is surplus at reasonable price, I would like 
to hear about it.

In a perfect world, Luis and I will finish all necessary work and get the 
conditional signed off at his airfield.  First flight will be out of there 
where I intend a very cautious approach, including slow flight at altitude to 
get a feel for handling characteristics.   A couple low approaches at the 
runway followed by first landing and then a few more full stop and taxi backs.  
Upon successful completion, I will probably call it a day.  The next flight 
will be a short cross country to my home field on the other side of the DFW 
complex.  Low approaches there too before first landing as it is a shorter and 
narrower runway.

Long term plans right now will be installing the Ilevil Avionics AP unit which 
provides full EFIS/glass screen capability using 1 to 2 iPads as screens.  
Adding the servos to complete the autopilot function will come last.  
Eventually I will apply for new N number and work on a new paint job.  Not that 
I dislike the current one but I want to personalize it to me and my background. 
 In the long, long term I may go for engine upgrade, perhaps Corsair.

For those who don’ t know.  I bought Jack Dougherty’s aircraft as he can no 
longer fly.  I hope to do it justice, and make it present once again at future 
gatherings and fly ins.  Jack built a super aircraft, upon which I intend to 
carefully and thoughtfully improve.  I think it will be a real joy to fly.  I 
also intend to do Young Eagles flights, as I think this would make a great 
aircraft for introducing youth to the joys of flying.

In the process I hope to meet many of you and learn from the collective wisdom 
of this group.

Best Regards,

Nelson “Ricky Bobby” Craig

On Aug 9, 2026, at 18:00, Mike Sylvester via KRnet <[email protected]> wrote:


Sent from my iPad

> On Aug 9, 2026, at 11:37 AM, Luis Claudio via KRnet <[email protected]> 
> wrote:
> 
> Thanks Oscar. We are going to try that. It makes sense. 
> 
> 
> Sent from Yahoo Mail for iPhone 
> <https://mail.onelink.me/107872968?pid=nativeplacement&c=Global_Acquisition_YMktg_315_Internal_EmailSignature&af_sub1=Acquisition&af_sub2=Global_YMktg&af_sub3=&af_sub4=100000604&af_sub5=EmailSignature__Static_&af_ios_store_cpp=9d3a686e-218d-4849-8298-b480188dc8ac&af_android_url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.yahoo.mobile.client.android.mail%26listing%3Demail_signature>
> 
> On Sunday, August 9, 2026, 11:34, Oscar Zuniga via KRnet 
> <[email protected]> wrote:
> 
> If the ignition is set up like it is in 335KC, do not start it on the VW 
> ignition.  On my plane the magneto is the primary since it will provide 
> sparks even if the battery goes away.  The VW  ignition is the secondary, 
> it's electronic and is set with fixed advance, and is used when the engine is 
> already running at flying speeds, the reason being that the secondary 
> ignition is advanced and if the engine is run or started at low  speeds on 
> that ignition, that spark will be too far advanced and running on it will not 
> be smooth and could damage the engine.  Others here who have more experience 
> with this hybrid dual ignition setup, please chime in.  Conversions with dual 
> magnetos like the Revmaster will not have this issue.
> 
> Oscar Zuniga
> Medford, OR
> 
> Get Outlook for iOS <https://aka.ms/o0ukef>
> From: KRnet <[email protected]> on behalf of Luis Claudio via 
> KRnet <[email protected]>
> Sent: Saturday, 08 August 2026 18:02:06
> To: KRnet <[email protected]>
> Cc: Luis Claudio <[email protected]>
> Subject: Re: KRnet> Working hard
>  
> So our next goal is to get Nelson to taxi the airplane and get used to its 
> handling. We also have to figure out what each switch does since they are not 
> marked. This engine has a single mag and a regular VW ignition. So the 
> question begs do we start with the regular ignition and after start turn on 
> the mag? We are not sure. 
> 
> 
> Sent from Yahoo Mail for iPhone 
> <https://mail.onelink.me/107872968?pid=nativeplacement&c=Global_Acquisition_YMktg_315_Internal_EmailSignature&af_sub1=Acquisition&af_sub2=Global_YMktg&af_sub3=&af_sub4=100000604&af_sub5=EmailSignature__Static_&af_ios_store_cpp=9d3a686e-218d-4849-8298-b480188dc8ac&af_android_url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.yahoo.mobile.client.android.mail%26listing%3Demail_signature>
> -- 
> KRnet mailing list
> [email protected] <mailto:[email protected]>
> https://list.krnet.org/mailman/listinfo/krnet
> -- 
> KRnet mailing list
> [email protected]
> https://list.krnet.org/mailman/listinfo/krnet
-- 
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet

-- 
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet

Reply via email to