Larry, you are exactly correct on what you say about testing his "Avioncito"
as Jack called his airplane. On our long, boring drive back from Oklahoma (from
Jack's house) I told Nelson that he needed to get on our Net and throw his
concerns out there because there is a lot of knowledge to be shared among our
group. Nelson and I are both military pilots, so we understand certain
protocols of a test flight... though he served in the lessor service (Navy) I
have a lot of confidence in his ability to keep the blue side up and the brown
side down of his artificial horizon. Standby for more to come...
On Monday, August 10, 2026 at 05:19:26 PM CDT, Larry Flesner via KRnet
<[email protected]> wrote:
On 8/10/2026 3:08 PM, Nelson Craig wrote:
> Lots of great comments here and Larry, I like the way to described how to
> determine approach speed. You echoed my concern about flying dual in my
> plane because I know the CG would be an issue.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
While I managed 50+ years of flying and was honored with the FAA "Master
Pilot Award" at one of our KR Gatherings, that bit of aviation knowledge
I gained from aviators wiser than me. I think it is standard practice.
I'm simply passing it along.
Two of my least understood aviation practices are why pilots are
hesitant to lean the mixture and why pilots are hesitant to use abundant
amounts of carb heat. A friend of mine with an RV10 had two forced
landings, the second in a bean field, because a lifetime of flying
Lycombing engines he was not in the habit of using carb heat on a
precautionary / regular basis. Both times he was tooling around at 8000
feet with a low power setting, throttled back to idle while descending
5k or 6K feet, and when he added power the engine stumbled and died.
The first time he was lucky and landed on a grass strip, waited several
minutes, restarted the engine and flew home. The second time, the same
location, he didn't quite make the strip. Proper leaning is good on the
engine and the only downside of carb heat is a very slight loss of power.
Your purchase of the KR has created more activity on the KRnet then I've
seen in several years. There is a great deal of knowledge hiding in the
bushes of the KRnet. The only dumb questions are the one you don't know
the answers to and fail to ask.
Good luck and keep us posted.
Larry Flesner
--
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet
--
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet