Take a look at the streamlining I did to flatten the bottom of the cowl and used a cowl flap at the back that retracted up inside the cowl to better streamline the bottom of the plane. It was very effective for cooling, but as it turned out, I rarely opened it past where the flap was even with the bottom of the cowl, and ran it in the retracted position at cruise, which did add speed to the cruise and still had the C-150 type airbox installed. If I were doing it again, I would move the hing further forward to get better streamlining of the bottom of the cowl and not have it open so far. Fully open it was an effective flap that made lots of drag and lifted the nose of the aircraft in flight.
<http://jeffsplanes.com/KR/2013_Cowl.html>
-Jeff Scott
Arkansas Ozarks
Sent: Tuesday, August 11, 2026 at 10:03 PM
From: "Phillip Matheson via KRnet" <[email protected]>
To: KRnet <[email protected]>
CC: "Phillip Matheson" <[email protected]>
Subject: KRnet> 0200 air filter
So does anyone have a good drawing or photo os a lower profile air cleaner intake with carb heat please
Thanks
Phil matheson
Australia
Sent from my iPhone--
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet
-- KRnet mailing list [email protected] https://list.krnet.org/mailman/listinfo/krnet

