I have been using Fusion 360 for the landing g gear I have been making ( 
greasedlandings.com )
And a nice feature is that I can model a part, assign the material it is going 
to be made from,  and it will calculate the weight.

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: KRnet <[email protected]> on behalf of Oscar Zuniga via KRnet 
<[email protected]>
Sent: Thursday, 27 August 2026 16:46:40
To: KRnet <[email protected]>
Cc: Oscar Zuniga <[email protected]>
Subject: KRnet> weight of KR retractable landing gear


John wrote-



>The KR-2 has a thicker, heaver spring bar, and may be longer, too.



Thanks, everyone who responded to my request for an estimate of the weight of 
the retract assembly.  My question is relation to the KR-1, for a new KRNet 
member who is going to start building one soon but in his country there is a 
weight limit so he’s trying to save weight and needed something to compare to 
against the weight of fixed gear.  All of this is good information to help him 
with his design and construction decisions.



Oscar Zuniga

Medford, OR

KR-1.5 N335KC “Sunbeam”, in restoration


-- 
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet

Reply via email to