Ok... found the parallel port inputs (status) error.. the setHigh()
operation was ORed with the readed value but it should be ANDed... now
seting or clearing status pins in the real port is shown in ktechlab and can
be conected to a ktl circuit... lets do some testings... :)
About the serial port the only thing to interface a pic or any other circuit
is a max232 or any other voltage adapter, depending on what the real
circuits needs.
2009/9/15 santiago gonzalez <santig...@gmail.com>
> No... is not a rs232 comunication... no protocol... you can just set or
> clear a pin, just like an electric conection. It can work just like a wire.
>
> 2009/9/15 Alan Grimes <agri...@speakeasy.net>
>
> > I'm thinking in not simulate PIC but run the code in a real pic and
>> > conect it to a virtual circuit through parallel port. I did a try with a
>> > real pic managing a virtual led in kltechlab through serial port,
>> > working ok; but serial has just a few lines, with parallel i could
>> > interface two whole ports.
>>
>> Obviously, with a serial port, you'll need a receiver/demultipelxer/UART
>> on the other end.
>>
>>
>> --
>> New president: Here we go again...
>> Chemistry.com: A total rip-off.
>> Powers are not rights.
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Come build with us! The BlackBerry® Developer Conference in SF, CA
>> is the only developer event you need to attend this year. Jumpstart your
>> developing skills, take BlackBerry mobile applications to market and stay
>> ahead of the curve. Join us from November 9-12, 2009. Register
>> now!
>> http://p.sf.net/sfu/devconf
>> _______________________________________________
>> Ktechlab-devel mailing list
>> Ktechlab-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/ktechlab-devel
>>
>
>
------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Ktechlab-devel mailing list
Ktechlab-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ktechlab-devel
