>>> >I have used KVM 16 in x86_64 OpenSUSE 10.2 without problems. >> >>> >I have recently downloaded and installed x86_64 RPMs of KVM 24. >> >>> >But I could not start it: >> >>> > >> >>> >#qemu-kvm >> >>> >open /dev/kvm: No such file or directory >> >>> >Could not initialize KVM, will disable KVM support >> >>> > >> >>> >I have Intel VT enabled in my PC and >> >>> >MODULES_LOADED_ON_BOOT="kvm kvm-intel" >> >>> > >> >>> Please make sure the modules are really loaded (/sbin/lsmod|grep kvm) >> >>> Check of you see /dev/kvm and its permissions. >> >> >> >>The result of the command: >> >>/sbin/lsmod|grep kvm >> >>was: >> >>KVM 86616 0 >>I did not found any /dev/kvm file... > >You don't have kvm_intel module loaded. >If it fails loading please check dmesg.
Thank you Dor! This is output of dmesg below. I could not understand why KVM 16 worked fine but KVM 25 or 26 does not work in OpenSUSE. Unfortunately, it's not possible to find KVM 16 because this version was replaced. linux-cyu9:~ # dmesg Bootdata ok (command line is root=/dev/sda3 vga=0x314 resume=/dev/sda2 splash=silent) Linux version 2.6.18.2-34-default ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e599000 (usable) BIOS-e820: 000000007e599000 - 000000007e5a6000 (reserved) BIOS-e820: 000000007e5a6000 - 000000007e656000 (usable) BIOS-e820: 000000007e656000 - 000000007e6a7000 (ACPI NVS) BIOS-e820: 000000007e6a7000 - 000000007e6ac000 (ACPI data) BIOS-e820: 000000007e6ac000 - 000000007e6f2000 (ACPI NVS) BIOS-e820: 000000007e6f2000 - 000000007e6f3000 (usable) BIOS-e820: 000000007e6f3000 - 000000007e6ff000 (ACPI data) BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable) BIOS-e820: 000000007e700000 - 000000007f000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.4 present. ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020 ACPI: RSDT (v001 INTEL DG965WH 0x00000629 0x01000013) @ 0x000000007e6fd038 ACPI: FADT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6fc000 ACPI: MADT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f6000 ACPI: WDDT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f5000 ACPI: MCFG (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f4000 ACPI: ASF! (v032 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f3000 ACPI: SSDT (v001 INTEL CpuPm 0x00000629 MSFT 0x01000013) @ 0x000000007e6ab000 ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6aa000 ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6a9000 ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6a8000 ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6a7000 ACPI: DSDT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007e700000 Bootmem setup node 0 0000000000000000-000000007e700000 On node 0 totalpages: 509464 DMA zone: 2877 pages, LIFO batch:0 DMA32 zone: 506587 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs Built 1 zonelists. Total pages: 509464 Kernel command line: root=/dev/sda3 vga=0x314 resume=/dev/sda2 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2131.258 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2031144k/2071552k available (1915k kernel code, 39232k reserved, 1278k data, 188k init) Calibrating delay using timer specific routine.. 4265.68 BogoMIPS (lpj=8531362) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 3394k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 16650443 Detected 16.650 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4262.70 BogoMIPS (lpj=8525419) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=23 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 90400000-904fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: 90100000-901fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: 90500000-905fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: 90600000-906fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: 90700000-907fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 90000000-900fffff PREFETCH window: disabled. GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.2 to 64 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1180472261.616:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] vesafb: framebuffer at 0x80000000, mapped to 0xffffc20000080000, using 3750k, total 7616k vesafb: mode is 800x600x16, linelength=1600, pages=6 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82985 bytes,<6>...found (800x600, 49016 bytes, v3). Console: switching to colour frame buffer device 96x33 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 188k freed SCSI subsystem initialized ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 193 input: ImPS/2 Generic Wheel Mouse as /class/input/input2 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000026100 ctl 0x0 bmdma 0x0 irq 58 ata2: SATA max UDMA/133 cmd 0xFFFFC20000026180 ctl 0x0 bmdma 0x0 irq 58 ata3: SATA max UDMA/133 cmd 0xFFFFC20000026200 ctl 0x0 bmdma 0x0 irq 58 ata4: SATA max UDMA/133 cmd 0xFFFFC20000026280 ctl 0x0 bmdma 0x0 irq 58 ata5: SATA max UDMA/133 cmd 0xFFFFC20000026300 ctl 0x0 bmdma 0x0 irq 58 ata6: SATA max UDMA/133 cmd 0xFFFFC20000026380 ctl 0x0 bmdma 0x0 irq 58 scsi0 : ahci ata1: SATA link down (SStatus 0 SControl 300) scsi1 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 169 scsi6 : pata_marvell BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ata7.00: ATAPI, max UDMA/33 ata7.01: ATA-5, max UDMA/100, 120103200 sectors: LBA ata7.01: ata7: dev 1 multi count 16 ata7.01: applying bridge limits ata7.00: configured for UDMA/33 ata7.01: configured for UDMA/100 Vendor: _NEC Model: DVD_RW ND-4571A Rev: 1-01 Type: CD-ROM ANSI SCSI revision: 05 Vendor: ATA Model: IC35L060AVVA07-0 Rev: VA3O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 120103200 512-byte hdwr sectors (61493 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray SCSI device sda: drive cache: write back SCSI device sda: 120103200 512-byte hdwr sectors (61493 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg0 type 5 sd 6:0:1:0: Attached scsi disk sda sd 6:0:1:0: Attached scsi generic sg1 type 0 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). usbcore: registered new driver usbfs usbcore: registered new driver hub agpgart: Detected an Intel 965G Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0x80000000 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 177, io base 0x000020c0 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected GSI 20 sharing vector 0x42 and IRQ 20 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 66, io base 0x000020a0 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 21 sharing vector 0x4A and IRQ 21 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 74, io base 0x00002080 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb3: SerialNumber: 0000:00:1d.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 193, io base 0x00002060 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb4: SerialNumber: 0000:00:1d.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 185, io base 0x00002040 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 185, io mem 0x90300c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: new device found, idVendor=0000, idProduct=0000 usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: EHCI Host Controller usb usb6: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb6: SerialNumber: 0000:00:1a.7 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 74, io mem 0x90300800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: new device found, idVendor=0000, idProduct=0000 usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: EHCI Host Controller usb usb7: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb7: SerialNumber: 0000:00:1d.7 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 66 Adding 15864176k swap on /dev/sda2. Priority:-1 extents:1 across:15864176k device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1180472273.160:2): AppArmor initialized ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] audit(1180457884.348:3): audit_pid=2900 old=0 by auid=4294967295 IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]> NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver bootsplash: status on console 0 changed to on Bootdata ok (command line is root=/dev/sda3 vga=0x314 resume=/dev/sda2 splash=silent) Linux version 2.6.18.2-34-default ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e599000 (usable) BIOS-e820: 000000007e599000 - 000000007e5a6000 (reserved) BIOS-e820: 000000007e5a6000 - 000000007e656000 (usable) BIOS-e820: 000000007e656000 - 000000007e6a7000 (ACPI NVS) BIOS-e820: 000000007e6a7000 - 000000007e6ac000 (ACPI data) BIOS-e820: 000000007e6ac000 - 000000007e6f2000 (ACPI NVS) BIOS-e820: 000000007e6f2000 - 000000007e6f3000 (usable) BIOS-e820: 000000007e6f3000 - 000000007e6ff000 (ACPI data) BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable) BIOS-e820: 000000007e700000 - 000000007f000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.4 present. ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020 ACPI: RSDT (v001 INTEL DG965WH 0x00000629 0x01000013) @ 0x000000007e6fd038 ACPI: FADT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6fc000 ACPI: MADT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f6000 ACPI: WDDT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f5000 ACPI: MCFG (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f4000 ACPI: ASF! (v032 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x000000007e6f3000 ACPI: SSDT (v001 INTEL CpuPm 0x00000629 MSFT 0x01000013) @ 0x000000007e6ab000 ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6aa000 ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6a9000 ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6a8000 ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000629 MSFT 0x01000013) @ 0x000000007e6a7000 ACPI: DSDT (v001 INTEL DG965WH 0x00000629 MSFT 0x01000013) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007e700000 Bootmem setup node 0 0000000000000000-000000007e700000 On node 0 totalpages: 509464 DMA zone: 2877 pages, LIFO batch:0 DMA32 zone: 506587 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs Built 1 zonelists. Total pages: 509464 Kernel command line: root=/dev/sda3 vga=0x314 resume=/dev/sda2 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2131.253 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2031144k/2071552k available (1915k kernel code, 39232k reserved, 1278k data, 188k init) Calibrating delay using timer specific routine.. 4265.68 BogoMIPS (lpj=8531376) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 3394k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 16650406 Detected 16.650 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4262.70 BogoMIPS (lpj=8525407) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=24 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 90400000-904fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: 90100000-901fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: 90500000-905fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: 90600000-906fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: 90700000-907fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 90000000-900fffff PREFETCH window: disabled. GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.2 to 64 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1180471312.608:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] vesafb: framebuffer at 0x80000000, mapped to 0xffffc20000080000, using 3750k, total 7616k vesafb: mode is 800x600x16, linelength=1600, pages=6 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82985 bytes,<6>...found (800x600, 49016 bytes, v3). Console: switching to colour frame buffer device 96x33 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 188k freed SCSI subsystem initialized ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 193 input: ImPS/2 Generic Wheel Mouse as /class/input/input2 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000026100 ctl 0x0 bmdma 0x0 irq 58 ata2: SATA max UDMA/133 cmd 0xFFFFC20000026180 ctl 0x0 bmdma 0x0 irq 58 ata3: SATA max UDMA/133 cmd 0xFFFFC20000026200 ctl 0x0 bmdma 0x0 irq 58 ata4: SATA max UDMA/133 cmd 0xFFFFC20000026280 ctl 0x0 bmdma 0x0 irq 58 ata5: SATA max UDMA/133 cmd 0xFFFFC20000026300 ctl 0x0 bmdma 0x0 irq 58 ata6: SATA max UDMA/133 cmd 0xFFFFC20000026380 ctl 0x0 bmdma 0x0 irq 58 scsi0 : ahci ata1: SATA link down (SStatus 0 SControl 300) scsi1 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 169 scsi6 : pata_marvell BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ata7.00: ATAPI, max UDMA/33 ata7.01: ATA-5, max UDMA/100, 120103200 sectors: LBA ata7.01: ata7: dev 1 multi count 16 ata7.01: applying bridge limits ata7.00: configured for UDMA/33 ata7.01: configured for UDMA/100 Vendor: _NEC Model: DVD_RW ND-4571A Rev: 1-01 Type: CD-ROM ANSI SCSI revision: 05 Vendor: ATA Model: IC35L060AVVA07-0 Rev: VA3O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 120103200 512-byte hdwr sectors (61493 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 120103200 512-byte hdwr sectors (61493 MB) sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<6>Uniform CD-ROM driver Revision: 3.20 sda1 sda2 sda3 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg0 type 5 sd 6:0:1:0: Attached scsi disk sda sd 6:0:1:0: Attached scsi generic sg1 type 0 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). usbcore: registered new driver usbfs usbcore: registered new driver hub agpgart: Detected an Intel 965G Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0x80000000 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 177, io base 0x000020c0 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected GSI 20 sharing vector 0x42 and IRQ 20 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 66, io base 0x000020a0 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 66 GSI 21 sharing vector 0x4A and IRQ 21 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 74, io base 0x00002080 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb3: SerialNumber: 0000:00:1d.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 193, io base 0x00002060 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb4: SerialNumber: 0000:00:1d.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 185, io base 0x00002040 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 185, io mem 0x90300c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: new device found, idVendor=0000, idProduct=0000 usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: EHCI Host Controller usb usb6: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb6: SerialNumber: 0000:00:1a.7 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 74, io mem 0x90300800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: new device found, idVendor=0000, idProduct=0000 usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: EHCI Host Controller usb usb7: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb7: SerialNumber: 0000:00:1d.7 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected Adding 15864176k swap on /dev/sda2. Priority:-1 extents:1 across:15864176k usb 7-6: new high speed USB device using ehci_hcd and address 2 usb 7-6: new device found, idVendor=0c76, idProduct=0005 usb 7-6: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 7-6: Product: TS1GJF2A usb 7-6: Manufacturer: JetFlash usb 7-6: SerialNumber: 0409091538123 usb 7-6: configuration #1 chosen from 1 choice Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Initializing USB Mass Storage driver... scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] Vendor: JetFlash Model: TS1GJF2A Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 2048000 512-byte hdwr sectors (1049 MB) sdb: Write Protect is off sdb: Mode Sense: 37 00 00 08 sdb: assuming drive cache: write through SCSI device sdb: 2048000 512-byte hdwr sectors (1049 MB) sdb: Write Protect is off sdb: Mode Sense: 37 00 00 08 sdb: assuming drive cache: write through sdb: sdb1 sd 7:0:0:0: Attached scsi removable disk sdb sd 7:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1180471324.072:2): AppArmor initialized ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]> audit(1180456935.694:3): audit_pid=2895 old=0 by auid=4294967295 bootsplash: status on console 0 changed to on ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel
