I have been attempting to get Windows Server 2003 running under KVM and am having some difficulty in doing so. I have tried it on both AMD and Intel-based machines and it crashes on each. Below is some basic information about my setup followed by the output from the crashes.
===== CPU Model: Intel Xeon 5130 2.0 Ghz KVM Version: 35 Host Kernel: 2.6.20 (-16-generic) Host Kernel Arch: i386 Guest: Windows Server 2003, 32 bit QEMU Command Line: /opt/kvm/bin/qemu-system-x86_64 -hda /home/kvm/images.d/accntg-apps.img -boot c -m 384 -no-acpi Problem w/-no-kvm Switch: Does not crash, but does not progress beyond initial black window Output... Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal error, but for better emulation accuracy either use a 2.6 host Linux kernel or type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root. unhandled vm exit: 0x9 rax 00000000fffffd60 rbx 000000008089d3f4 rcx 000000008089fd80 rdx 00000000808a414d rsi 0000000000000001 rdi 00000000fffe00e0 rsp 000000008089d374 rbp 000000008089d374 r8 0000000000000000 r9 0000000000000000 r10 0000000000000000 r11 0000000000000000 r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 0000000000000000 rip 000000008082646a rflags 00000246 cs 0008 (00000000/ffffffff p 1 dpl 0 db 1 s 1 type b l 0 g 1 avl 0) ds 0023 (00000000/ffffffff p 1 dpl 3 db 1 s 1 type 3 l 0 g 1 avl 0) es 0023 (00000000/ffffffff p 1 dpl 3 db 1 s 1 type 3 l 0 g 1 avl 0) ss 0010 (00000000/ffffffff p 1 dpl 0 db 1 s 1 type 3 l 0 g 1 avl 0) fs 0030 (ffdff000/00001fff p 1 dpl 0 db 1 s 1 type 3 l 0 g 1 avl 0) gs 0000 (00000000/0000ffff p 1 dpl 0 db 0 s 1 type 3 l 0 g 0 avl 0) tr 0028 (80042000/000020ab p 1 dpl 0 db 0 s 0 type b l 0 g 0 avl 0) ldt 0000 (00000000/ffffffff p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl 0) gdt 8003f000/3ff idt 8003f400/7ff cr0 e001003d cr2 fffe00e0 cr3 39000 cr4 0 cr8 0 efer 0 ===== CPU Model: AMD Athlon 64 X2 Dual Core 4000+ KVM Version: 35 Host Kernel: 2.6.20 (-16-generic) Host Kernel Arch: i386 Guest: Windows Server 2003, 32 bit QEMU Command Line: /opt/kvm/bin/qemu-system-x86_64 -hda /home/kvm/images.d/accntg-apps.img -boot c -m 384 -no-acpi Problem w/-no-kvm Switch: Does not crash, but does not progress beyond initial black window Output... Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal error, but for better emulation accuracy either use a 2.6 host Linux kernel or type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root. unhandled vm exit: 0x3f60101 rax 00000000000000ff rbx 000000008089d3f4 rcx 0000000000000001 rdx 00000000808a414d rsi 0000000080a78529 rdi 00000000fffe00e0 rsp 000000008089d358 rbp 000000008089d374 r8 0000000000000000 r9 0000000000000000 r10 0000000000000000 r11 0000000000000000 r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 0000000000000000 rip 00000000808760f7 rflags 00000202 cs 0008 (00000000/ffffffff p 1 dpl 0 db 1 s 1 type b l 0 g 0 avl 0) ds 0023 (00000000/ffffffff p 1 dpl 3 db 1 s 1 type 3 l 0 g 1 avl 0) es 0023 (00000000/ffffffff p 1 dpl 3 db 1 s 1 type 3 l 0 g 1 avl 0) ss 0010 (00000000/ffffffff p 1 dpl 0 db 1 s 1 type 3 l 0 g 1 avl 0) fs 0030 (ffdff000/00001fff p 1 dpl 0 db 1 s 1 type 3 l 0 g 1 avl 0) gs 0000 (00000000/0000ffff p 1 dpl 0 db 0 s 1 type 3 l 0 g 0 avl 0) tr 0028 (80042000/000020ab p 1 dpl 0 db 0 s 0 type 9 l 0 g 0 avl 0) ldt 0000 (00000000/0000ffff p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl 0) gdt 8003f000/3ff idt 8003f400/7ff cr0 8001003d cr2 fffe00e0 cr3 39000 cr4 0 cr8 0 efer 0 ===== Additional Information Both systems are running Ubuntu Feisty and each is entirely current on its patches. When using the Ubuntu-installed tools Windows 2003 Server runs on the Intel box, but not the AMD box. I am attempting to run the newest version of KVM for its stability and performance benefits as I hope to use KVM in a production environment in the next few months. In both cases the build was configured as follows: ./configure --prefix=/opt/kvm-35 --qemu-cc="/usr/bin/gcc-3.[34]" Note that I am unclear as to when to use the --with-patched-kernel option (wasn't sure if this was just for when you wanted kvm baked directly into the kernel -- would love clarification on exactly what a "patched kernel" is). Nonetheless, I tried this and the build failed. I can provide more information if this is, in fact, what I should have been doing. I assume that what I did above was right as I can run Ubuntu Feisty as a guest without any issues whatsoever on KVM-35. Thanks for any help you can provide. - Clive ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel
