This patch introduces virtio support over PCI. virtio is a generic virtual IO framework for Linux first introduced in 2.6.23. Since 2.6.25, virtio has supported a PCI transport which this patch implements.
Since the last time these patches were posted to qemu-devel, I've reworked it to use the proper access functions to manipulate guest memory. Signed-off-by: Anthony Liguori <[EMAIL PROTECTED]> diff --git a/Makefile.target b/Makefile.target index 94f3e58..6815ba8 100644 --- a/Makefile.target +++ b/Makefile.target @@ -534,6 +534,9 @@ OBJS += pcnet.o OBJS += rtl8139.o OBJS += e1000.o +# virtio devices +OBJS += virtio.o + ifeq ($(TARGET_BASE_ARCH), i386) # Hardware support OBJS+= ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o diff --git a/cutils.c b/cutils.c index 9ef2fa6..814b3c4 100644 --- a/cutils.c +++ b/cutils.c @@ -95,3 +95,14 @@ time_t mktimegm(struct tm *tm) t += 3600 * tm->tm_hour + 60 * tm->tm_min + tm->tm_sec; return t; } + +int fls(int i) +{ + int bit; + + for (bit=31; bit >= 0; bit--) + if (i & (1 << bit)) + return bit+1; + + return 0; +} diff --git a/hw/virtio-pci.h b/hw/virtio-pci.h new file mode 100644 index 0000000..9262e49 --- /dev/null +++ b/hw/virtio-pci.h @@ -0,0 +1,65 @@ +/* + * Virtio Support + * + * Copyright IBM, Corp. 2007-2008 + * + * Authors: + * Anthony Liguori <[EMAIL PROTECTED]> + * Rusty Russell <[EMAIL PROTECTED]> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + */ + +#ifndef _VIRTIO_PCI_H +#define _VIRTIO_PCI_H + +/* from Linux's linux/virtio_ring.h */ + +/* This marks a buffer as continuing via the next field. */ +#define VRING_DESC_F_NEXT 1 +/* This marks a buffer as write-only (otherwise read-only). */ +#define VRING_DESC_F_WRITE 2 + +/* This means don't notify other side when buffer added. */ +#define VRING_USED_F_NO_NOTIFY 1 +/* This means don't interrupt guest when buffer consumed. */ +#define VRING_AVAIL_F_NO_INTERRUPT 1 + +#define VIRTIO_PCI_QUEUE_MAX 16 + +/* from Linux's linux/virtio_pci.h */ + +/* A 32-bit r/o bitmask of the features supported by the host */ +#define VIRTIO_PCI_HOST_FEATURES 0 + +/* A 32-bit r/w bitmask of features activated by the guest */ +#define VIRTIO_PCI_GUEST_FEATURES 4 + +/* A 32-bit r/w PFN for the currently selected queue */ +#define VIRTIO_PCI_QUEUE_PFN 8 + +/* A 16-bit r/o queue size for the currently selected queue */ +#define VIRTIO_PCI_QUEUE_NUM 12 + +/* A 16-bit r/w queue selector */ +#define VIRTIO_PCI_QUEUE_SEL 14 + +/* A 16-bit r/w queue notifier */ +#define VIRTIO_PCI_QUEUE_NOTIFY 16 + +/* An 8-bit device status register. */ +#define VIRTIO_PCI_STATUS 18 + +/* An 8-bit r/o interrupt status register. Reading the value will return the + * current contents of the ISR and will also clear it. This is effectively + * a read-and-acknowledge. */ +#define VIRTIO_PCI_ISR 19 + +#define VIRTIO_PCI_CONFIG 20 + +/* Virtio ABI version, if we increment this, we break the guest driver. */ +#define VIRTIO_PCI_ABI_VERSION 0 + +#endif diff --git a/hw/virtio.c b/hw/virtio.c new file mode 100644 index 0000000..9e75b2f --- /dev/null +++ b/hw/virtio.c @@ -0,0 +1,594 @@ +/* + * Virtio Support + * + * Copyright IBM, Corp. 2007-2008 + * + * Authors: + * Anthony Liguori <[EMAIL PROTECTED]> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + */ + +#include <inttypes.h> +#include <err.h> + +#include "virtio.h" +#include "sysemu.h" +#include "virtio-pci.h" + +typedef struct VRingDesc +{ + /* Address (guest-physical). */ + uint64_t addr; + /* Length. */ + uint32_t len; + /* The flags as indicated above. */ + uint16_t flags; + /* We chain unused descriptors via this, too */ + uint16_t next; +} VRingDesc; + +typedef struct VRingAvail +{ + uint16_t flags; + uint16_t idx; + uint16_t ring[]; +} VRingAvail; + +typedef struct VRingUsedElem +{ + /* Index of start of used descriptor chain. */ + uint32_t id; + /* Total length of the descriptor chain which was used (written to) */ + uint32_t len; +} VRingUsedElem; + +typedef struct VRingUsed +{ + uint16_t flags; + uint16_t idx; + VRingUsedElem ring[]; +} VRingUsed; + +typedef struct VRing +{ + unsigned int num; + target_phys_addr_t desc; + target_phys_addr_t avail; + target_phys_addr_t used; +} VRing; + +struct VirtQueue +{ + VRing vring; + uint32_t pfn; + uint16_t last_avail_idx; + void (*handle_output)(VirtIODevice *vdev, VirtQueue *vq); + int index; + VirtIODevice *vdev; +}; + +/* QEMU doesn't strictly need write barriers since everything runs in + * lock-step. We'll leave the calls to wmb() in though to make it obvious for + * KVM or if kqemu gets SMP support. + */ + +#define wmb() do { } while (0) + +/* FIXME put this somewhere generic */ +#define offsetof(type, member) ((unsigned long)(&((type *)0)->member)) + +/* virt queue functions */ + +static void virtqueue_init(VirtQueue *vq, target_phys_addr_t p) +{ + vq->vring.desc = p; + vq->vring.avail = p + vq->vring.num * 16; + vq->vring.used = vq->vring.avail + 2 * (2 + vq->vring.num); + vq->vring.used = TARGET_PAGE_ALIGN(vq->vring.used); +} + +static uint64_t vring_desc_addr(VirtQueue *vq, unsigned int i) +{ + return ldq_phys(vq->vring.desc + i * sizeof(VRingDesc) + + offsetof(VRingDesc, addr)); +} + +static uint32_t vring_desc_len(VirtQueue *vq, unsigned int i) +{ + return ldl_phys(vq->vring.desc + i * sizeof(VRingDesc) + + offsetof(VRingDesc, len)); +} + +static uint16_t vring_desc_flags(VirtQueue *vq, unsigned int i) +{ + return lduw_phys(vq->vring.desc + i * sizeof(VRingDesc) + + offsetof(VRingDesc, flags)); +} + +static uint16_t vring_desc_next(VirtQueue *vq, unsigned int i) +{ + return lduw_phys(vq->vring.desc + i * sizeof(VRingDesc) + + offsetof(VRingDesc, next)); +} + +static uint16_t vring_avail_flags(VirtQueue *vq) +{ + return lduw_phys(vq->vring.avail + offsetof(VRingAvail, flags)); +} + +static uint16_t vring_avail_idx(VirtQueue *vq) +{ + return lduw_phys(vq->vring.avail + offsetof(VRingAvail, idx)); +} + +static uint16_t vring_avail_ring(VirtQueue *vq, unsigned int i) +{ + return lduw_phys(vq->vring.avail + offsetof(VRingAvail, ring[i])); +} + +static void vring_used_set_flag(VirtQueue *vq, uint16_t flag) +{ + stw_phys(vq->vring.used + offsetof(VRingUsed, flags), + lduw_phys(vq->vring.used + offsetof(VRingUsed, flags)) | flag); +} + +static void vring_used_unset_flag(VirtQueue *vq, uint16_t flag) +{ + stw_phys(vq->vring.used + offsetof(VRingUsed, flags), + lduw_phys(vq->vring.used + offsetof(VRingUsed, flags)) & ~flag); +} + +static uint16_t vring_used_get_idx(VirtQueue *vq) +{ + return lduw_phys(vq->vring.used + offsetof(VRingUsed, idx)); +} + +static void vring_used_set_idx(VirtQueue *vq, uint16_t value) +{ + stw_phys(vq->vring.used + offsetof(VRingUsed, idx), value); +} + +static void vring_used_set_ring(VirtQueue *vq, unsigned int i, + uint32_t id, uint32_t len) +{ + stl_phys(vq->vring.used + offsetof(VRingUsed, ring[i].id), id); + stl_phys(vq->vring.used + offsetof(VRingUsed, ring[i].len), len); +} + +static unsigned virtqueue_next_desc(VirtQueue *vq, unsigned int i) +{ + unsigned int next; + + /* If this descriptor says it doesn't chain, we're done. */ + if (!(vring_desc_flags(vq, i) & VRING_DESC_F_NEXT)) + return vq->vring.num; + + /* Check they're not leading us off end of descriptors. */ + next = vring_desc_next(vq, i); + /* Make sure compiler knows to grab that: we don't want it changing! */ + wmb(); + + if (next >= vq->vring.num) + errx(1, "Desc next is %u", next); + + return next; +} + +void virtqueue_push(VirtQueue *vq, VirtQueueElement *elem, unsigned int len) +{ + uint16_t idx; + + pci_device_dma_unmap(&vq->vdev->pci_dev, elem->phys_in, elem->virt_in, 1); + pci_device_dma_unmap(&vq->vdev->pci_dev, elem->phys_out, elem->virt_out, 0); + + idx = vring_used_get_idx(vq); + vring_used_set_ring(vq, idx % vq->vring.num, elem->index, len); + wmb(); + vring_used_set_idx(vq, idx + 1); + + qemu_free(elem->phys_in); + qemu_free(elem->phys_out); + qemu_free(elem); +} + +VirtQueueElement *virtqueue_pop(VirtQueue *vq) +{ + unsigned int i, head; + unsigned int position; + VirtQueueElement *elem; + + /* Check it isn't doing very strange things with descriptor numbers. */ + if ((uint16_t)(vring_avail_idx(vq) - vq->last_avail_idx) > vq->vring.num) + errx(1, "Guest moved used index from %u to %u", + vq->last_avail_idx, vring_avail_idx(vq)); + + /* If there's nothing new since last we looked, return invalid. */ + if (vring_avail_idx(vq) == vq->last_avail_idx) + return NULL; + + /* Grab the next descriptor number they're advertising, and increment + * the index we've seen. */ + head = vring_avail_ring(vq, vq->last_avail_idx++ % vq->vring.num); + + /* If their number is silly, that's a fatal mistake. */ + if (head >= vq->vring.num) + errx(1, "Guest says index %u is available", head); + + /* When we start there are none of either input nor output. */ + position = 0; + + elem = qemu_mallocz(sizeof(VirtQueueElement)); + + elem->phys_in = qemu_mallocz(sizeof(PhysIOVector) + + vq->vring.num * sizeof(PhysIOVectorElement)); + elem->phys_out = qemu_mallocz(sizeof(PhysIOVector) + + vq->vring.num * sizeof(PhysIOVectorElement)); + + i = head; + do { + PhysIOVectorElement *sge; + + if (vring_desc_flags(vq, i) & VRING_DESC_F_WRITE) + sge = &elem->phys_in->sg[elem->phys_in->num++]; + else + sge = &elem->phys_out->sg[elem->phys_out->num++]; + + /* Grab the first descriptor, and check it's OK. */ + sge->len = vring_desc_len(vq, i); + sge->base = vring_desc_addr(vq, i); + + /* If we've got too many, that implies a descriptor loop. */ + if ((elem->phys_in->num + elem->phys_out->num) > vq->vring.num) + errx(1, "Looped descriptor"); + } while ((i = virtqueue_next_desc(vq, i)) != vq->vring.num); + + elem->virt_in = pci_device_dma_map(&vq->vdev->pci_dev, elem->phys_in); + elem->virt_out = pci_device_dma_map(&vq->vdev->pci_dev, elem->phys_out); + elem->index = head; + + if (elem->virt_in == NULL || elem->virt_out == NULL) + errx(1, "Bad DMA"); + + return elem; +} + +/* virtio device */ + +static VirtIODevice *to_virtio_device(PCIDevice *pci_dev) +{ + return (VirtIODevice *)pci_dev; +} + +static void virtio_update_irq(VirtIODevice *vdev) +{ + qemu_set_irq(vdev->pci_dev.irq[0], vdev->isr & 1); +} + +void virtio_reset(void *opaque) +{ + VirtIODevice *vdev = opaque; + int i; + + vdev->features = 0; + vdev->queue_sel = 0; + vdev->status = 0; + vdev->isr = 0; + + for(i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) { + vdev->vq[i].vring.desc = 0; + vdev->vq[i].vring.avail = 0; + vdev->vq[i].vring.used = 0; + vdev->vq[i].last_avail_idx = 0; + vdev->vq[i].pfn = 0; + } +} + +static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val) +{ + VirtIODevice *vdev = to_virtio_device(opaque); + ram_addr_t pa; + + addr -= vdev->addr; + + switch (addr) { + case VIRTIO_PCI_GUEST_FEATURES: + if (vdev->set_features) + vdev->set_features(vdev, val); + vdev->features = val; + break; + case VIRTIO_PCI_QUEUE_PFN: + pa = (ram_addr_t)val << TARGET_PAGE_BITS; + vdev->vq[vdev->queue_sel].pfn = val; + if (pa == 0) + virtio_reset(vdev); + else + virtqueue_init(&vdev->vq[vdev->queue_sel], pa); + break; + case VIRTIO_PCI_QUEUE_SEL: + if (val < VIRTIO_PCI_QUEUE_MAX) + vdev->queue_sel = val; + break; + case VIRTIO_PCI_QUEUE_NOTIFY: + if (val < VIRTIO_PCI_QUEUE_MAX && vdev->vq[val].vring.desc) + vdev->vq[val].handle_output(vdev, &vdev->vq[val]); + break; + case VIRTIO_PCI_STATUS: + vdev->status = val & 0xFF; + if (vdev->status == 0) + virtio_reset(vdev); + break; + } +} + +static uint32_t virtio_ioport_read(void *opaque, uint32_t addr) +{ + VirtIODevice *vdev = to_virtio_device(opaque); + uint32_t ret = 0xFFFFFFFF; + + addr -= vdev->addr; + + switch (addr) { + case VIRTIO_PCI_HOST_FEATURES: + ret = vdev->get_features(vdev); + break; + case VIRTIO_PCI_GUEST_FEATURES: + ret = vdev->features; + break; + case VIRTIO_PCI_QUEUE_PFN: + ret = vdev->vq[vdev->queue_sel].pfn; + break; + case VIRTIO_PCI_QUEUE_NUM: + ret = vdev->vq[vdev->queue_sel].vring.num; + break; + case VIRTIO_PCI_QUEUE_SEL: + ret = vdev->queue_sel; + break; + case VIRTIO_PCI_STATUS: + ret = vdev->status; + break; + case VIRTIO_PCI_ISR: + /* reading from the ISR also clears it. */ + ret = vdev->isr; + vdev->isr = 0; + virtio_update_irq(vdev); + break; + default: + break; + } + + return ret; +} + +static uint32_t virtio_config_readb(void *opaque, uint32_t addr) +{ + VirtIODevice *vdev = opaque; + uint8_t val; + + addr -= vdev->addr + VIRTIO_PCI_CONFIG; + if (addr > (vdev->config_len - sizeof(val))) + return (uint32_t)-1; + + memcpy(&val, vdev->config + addr, sizeof(val)); + return val; +} + +static uint32_t virtio_config_readw(void *opaque, uint32_t addr) +{ + VirtIODevice *vdev = opaque; + uint16_t val; + + addr -= vdev->addr + VIRTIO_PCI_CONFIG; + if (addr > (vdev->config_len - sizeof(val))) + return (uint32_t)-1; + + memcpy(&val, vdev->config + addr, sizeof(val)); + return val; +} + +static uint32_t virtio_config_readl(void *opaque, uint32_t addr) +{ + VirtIODevice *vdev = opaque; + uint32_t val; + + addr -= vdev->addr + VIRTIO_PCI_CONFIG; + if (addr > (vdev->config_len - sizeof(val))) + return (uint32_t)-1; + + memcpy(&val, vdev->config + addr, sizeof(val)); + return val; +} + +static void virtio_config_writeb(void *opaque, uint32_t addr, uint32_t data) +{ + VirtIODevice *vdev = opaque; + uint8_t val = data; + + addr -= vdev->addr + VIRTIO_PCI_CONFIG; + if (addr > (vdev->config_len - sizeof(val))) + return; + + memcpy(vdev->config + addr, &val, sizeof(val)); + + if (vdev->set_config) + vdev->set_config(vdev, vdev->config); +} + +static void virtio_config_writew(void *opaque, uint32_t addr, uint32_t data) +{ + VirtIODevice *vdev = opaque; + uint16_t val = data; + + addr -= vdev->addr + VIRTIO_PCI_CONFIG; + if (addr > (vdev->config_len - sizeof(val))) + return; + + memcpy(vdev->config + addr, &val, sizeof(val)); + + if (vdev->set_config) + vdev->set_config(vdev, vdev->config); +} + +static void virtio_config_writel(void *opaque, uint32_t addr, uint32_t data) +{ + VirtIODevice *vdev = opaque; + uint32_t val = data; + + addr -= vdev->addr + VIRTIO_PCI_CONFIG; + if (addr > (vdev->config_len - sizeof(val))) + return; + + memcpy(vdev->config + addr, &val, sizeof(val)); + + if (vdev->set_config) + vdev->set_config(vdev, vdev->config); +} + +static void virtio_map(PCIDevice *pci_dev, int region_num, + uint32_t addr, uint32_t size, int type) +{ + VirtIODevice *vdev = to_virtio_device(pci_dev); + int i; + + vdev->addr = addr; + for (i = 0; i < 3; i++) { + register_ioport_write(addr, 20, 1 << i, virtio_ioport_write, vdev); + register_ioport_read(addr, 20, 1 << i, virtio_ioport_read, vdev); + } + + if (vdev->config_len) { + register_ioport_write(addr + 20, vdev->config_len, 1, + virtio_config_writeb, vdev); + register_ioport_write(addr + 20, vdev->config_len, 2, + virtio_config_writew, vdev); + register_ioport_write(addr + 20, vdev->config_len, 4, + virtio_config_writel, vdev); + register_ioport_read(addr + 20, vdev->config_len, 1, + virtio_config_readb, vdev); + register_ioport_read(addr + 20, vdev->config_len, 2, + virtio_config_readw, vdev); + register_ioport_read(addr + 20, vdev->config_len, 4, + virtio_config_readl, vdev); + + vdev->get_config(vdev, vdev->config); + } +} + +VirtQueue *virtio_add_queue(VirtIODevice *vdev, int queue_size, + void (*handle_output)(VirtIODevice *, VirtQueue *)) +{ + int i; + + for (i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) { + if (vdev->vq[i].vring.num == 0) + break; + } + + if (i == VIRTIO_PCI_QUEUE_MAX) + abort(); + + vdev->vq[i].vring.num = queue_size; + vdev->vq[i].handle_output = handle_output; + vdev->vq[i].index = i; + vdev->vq[i].vdev = vdev; + + return &vdev->vq[i]; +} + +void virtio_notify_config(VirtIODevice *vdev) +{ + /* make sure we have the latest config */ + vdev->get_config(vdev, vdev->config); + vdev->isr = 3; + virtio_update_irq(vdev); +} + +void virtio_notify(VirtIODevice *vdev, VirtQueue *vq) +{ + /* Always notify when queue is empty */ + if (vring_avail_idx(vq) != vq->last_avail_idx && + (vring_avail_flags(vq) & VRING_AVAIL_F_NO_INTERRUPT)) + return; + + vdev->isr = 1; + virtio_update_irq(vdev); +} + +void virtio_ring_set_used_notify(VirtQueue *vq, int enable) +{ + if (enable) + vring_used_set_flag(vq, VRING_USED_F_NO_NOTIFY); + else + vring_used_unset_flag(vq, VRING_USED_F_NO_NOTIFY); +} + +size_t virtio_ring_avail_size(VirtQueue *vq) +{ + return vring_avail_idx(vq) - vq->last_avail_idx; +} + +int virtio_ring_inited(VirtQueue *vq) +{ + return (vq->vring.avail != 0); +} + +VirtIODevice *virtio_init_pci(PCIBus *bus, const char *name, + uint16_t vendor, uint16_t device, + uint16_t subvendor, uint16_t subdevice, + uint8_t class_code, uint8_t subclass_code, + uint8_t pif, size_t config_size, + size_t struct_size) +{ + VirtIODevice *vdev; + PCIDevice *pci_dev; + uint8_t *config; + uint32_t size; + + pci_dev = pci_register_device(bus, name, struct_size, + -1, NULL, NULL); + vdev = to_virtio_device(pci_dev); + + vdev->status = 0; + vdev->isr = 0; + vdev->queue_sel = 0; + vdev->vq = qemu_mallocz(sizeof(VirtQueue) * VIRTIO_PCI_QUEUE_MAX); + + config = pci_dev->config; + config[0x00] = vendor & 0xFF; + config[0x01] = (vendor >> 8) & 0xFF; + config[0x02] = device & 0xFF; + config[0x03] = (device >> 8) & 0xFF; + + config[0x08] = VIRTIO_PCI_ABI_VERSION; + + config[0x09] = pif; + config[0x0a] = subclass_code; + config[0x0b] = class_code; + config[0x0e] = 0x00; + + config[0x2c] = subvendor & 0xFF; + config[0x2d] = (subvendor >> 8) & 0xFF; + config[0x2e] = subdevice & 0xFF; + config[0x2f] = (subdevice >> 8) & 0xFF; + + config[0x3d] = 1; + + vdev->name = name; + vdev->config_len = config_size; + if (vdev->config_len) + vdev->config = qemu_mallocz(config_size); + else + vdev->config = NULL; + + size = 20 + config_size; + if (size & (size-1)) + size = 1 << fls(size); + + pci_register_io_region(pci_dev, 0, size, PCI_ADDRESS_SPACE_IO, + virtio_map); + qemu_register_reset(virtio_reset, vdev); + + return vdev; +} diff --git a/hw/virtio.h b/hw/virtio.h new file mode 100644 index 0000000..301aed7 --- /dev/null +++ b/hw/virtio.h @@ -0,0 +1,89 @@ +/* + * Virtio Support + * + * Copyright IBM, Corp. 2007-2008 + * + * Authors: + * Anthony Liguori <[EMAIL PROTECTED]> + * Rusty Russell <[EMAIL PROTECTED]> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + */ + +#ifndef _QEMU_VIRTIO_H +#define _QEMU_VIRTIO_H + +#include "hw.h" +#include "pci.h" +#include "iovector.h" + +/* from Linux's linux/virtio_config.h */ + +/* Status byte for guest to report progress, and synchronize features. */ +/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ +#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 +/* We have found a driver for the device. */ +#define VIRTIO_CONFIG_S_DRIVER 2 +/* Driver has used its parts of the config, and is happy */ +#define VIRTIO_CONFIG_S_DRIVER_OK 4 +/* We've given up on this device. */ +#define VIRTIO_CONFIG_S_FAILED 0x80 + +typedef struct VirtQueue VirtQueue; +typedef struct VirtIODevice VirtIODevice; + +typedef struct VirtQueueElement +{ + unsigned int index; + IOVector *virt_in, *virt_out; + PhysIOVector *phys_in, *phys_out; +} VirtQueueElement; + +struct VirtIODevice +{ + PCIDevice pci_dev; + const char *name; + uint32_t addr; + uint16_t vendor; + uint16_t device; + uint8_t status; + uint8_t isr; + uint16_t queue_sel; + uint32_t features; + size_t config_len; + void *config; + uint32_t (*get_features)(VirtIODevice *vdev); + void (*set_features)(VirtIODevice *vdev, uint32_t val); + void (*get_config)(VirtIODevice *vdev, uint8_t *config); + void (*set_config)(VirtIODevice *vdev, const uint8_t *config); + VirtQueue *vq; +}; + +VirtIODevice *virtio_init_pci(PCIBus *bus, const char *name, + uint16_t vendor, uint16_t device, + uint16_t subvendor, uint16_t subdevice, + uint8_t class_code, uint8_t subclass_code, + uint8_t pif, size_t config_size, + size_t struct_size); + +VirtQueue *virtio_add_queue(VirtIODevice *vdev, int queue_size, + void (*handle_output)(VirtIODevice *, + VirtQueue *)); + +void virtqueue_push(VirtQueue *vq, VirtQueueElement *elem, unsigned int len); + +VirtQueueElement *virtqueue_pop(VirtQueue *vq); + +void virtio_notify(VirtIODevice *vdev, VirtQueue *vq); + +void virtio_ring_set_used_notify(VirtQueue *vq, int enable); + +size_t virtio_ring_avail_size(VirtQueue *vq); + +int virtio_ring_inited(VirtQueue *vq); + +void virtio_notify_config(VirtIODevice *vdev); + +#endif diff --git a/qemu-common.h b/qemu-common.h index 746dcc5..cd387b1 100644 --- a/qemu-common.h +++ b/qemu-common.h @@ -85,6 +85,7 @@ char *pstrcat(char *buf, int buf_size, const char *s); int strstart(const char *str, const char *val, const char **ptr); int stristart(const char *str, const char *val, const char **ptr); time_t mktimegm(struct tm *tm); +int fls(int i); /* Error handling. */ ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel