On Tue, 2008-04-01 at 09:46 -0500, Anthony Liguori wrote:
> Hollis Blanchard wrote:
> > On Tue, 2008-04-01 at 14:08 +0200, Christian Ehrhardt wrote:
> >> bash-3.00# cat /proc/partitions
> >> major minor #blocks name
> >> [...]
> >> 254 0 22517998136852480 vda <- ?broken?
> >>
> >
> > My guess is this is run-of-the-mill endianness mismatch.
> > 22517998136852480 = 0x00500000_00000000, which 64-bit byteswapped would
> > be 0x5000, and that's probably a reasonable number of 512-byte blocks.
> > Is your disk image 10MB?
> >
> > Why would we have a problem, since both guest and host are big-endian?
> > Because virtio is a PCI device, and PCI MMIO are LE, so
> > __virtio_config_val() in the guest is (correctly) using le64_to_cpu().
> >
> > Why didn't we have problems with virtio-net? Because virtio-net doesn't
> > seem to have anything interesting in PCI config space. virtio-blk's
> > config space contains the capacity and a few other pieces of
> > information.
> >
> > The fix needs to be in qemu, and given the lack of qemu endianness
> > infrastructure, I'm afraid it will be a hack. See
> > http://svn.savannah.nongnu.org/viewvc/trunk/hw/e1000.c?root=qemu&r1=4046&r2=4045&pathrev=4046
> > for reference. We all know that TARGET_WORDS_BIGENDIAN is totally wrong,
> > but unfortunately it also seems to be the only (accidentally) working
> > solution in qemu without major IO system rework. :(
>
> It's actually not so bad since the virtio config space is already read
> one byte at a time. The following should help.
>
> diff --git a/qemu/hw/virtio-blk.c b/qemu/hw/virtio-blk.c
> index 0f55d2a..492bd7f 100644
> --- a/qemu/hw/virtio-blk.c
> +++ b/qemu/hw/virtio-blk.c
> @@ -134,8 +134,8 @@ static void virtio_blk_update_config(VirtIODevice
> *vdev, uin
> int64_t capacity;
>
> bdrv_get_geometry(s->bs, &capacity);
> - blkcfg.capacity = capacity;
> - blkcfg.seg_max = 128 - 2;
> + blkcfg.capacity = cpu_to_le64(capacity);
> + blkcfg.seg_max = cpu_to_le32(128 - 2);
> memcpy(config, &blkcfg, sizeof(blkcfg));
> }
Thanks Anthony, you've saved me a lot of debug time! Rusty, doing 64-bit
PCI config space accesses with ioread8() definitely violates the
principle of least surprises, and would have taken me a long time to
track down. :(
Attached is a boot log of a PowerPC guest booting from virtio-blk root.
"ramdisk_image" is the standard ~4MB image provided with DENX Embedded
Linux Development Kit. Booting is also *way* faster than NFS root (a few
seconds to get to a shell :) .
--
Hollis Blanchard
IBM Linux Technology Center
bash-3.00# ./qemu-system-ppcemb -M bamboo -nographic -kernel ../../uImage.bamboo -L ../pc-bios/ -append "root=/dev/vda rw debug" -net nic,model=virtio -net tap -drive file=/images/ramdisk_image,if=virtio,boot=on
bamboo_init: START
Ram size passed is: 144 MB
Calling function ppc440_init
setup mmio
setup universal controller
trying to setup sdram controller
sdram_unmap_bcr: Unmap RAM area 0000000000000000 00400000
sdram_unmap_bcr: Unmap RAM area 0000000000000000 00400000
sdram_set_bcr: Map RAM area 0000000000000000 08000000
sdram_set_bcr: Map RAM area 0000000000000000 01000000
Initializing first serial port
ppc405_serial_init: offset 0000000000000300
Done calling ppc440_init
bamboo_init: load kernel
kernel is at guest address: 0x0
bamboo_init: load device tree file
device tree address is at guest address: 0x2b2100
bamboo_init: loading kvm registers
bamboo_init: DONE
Using Bamboo machine description
Linux version 2.6.25-rc3-hg1858cec8eb87-dirty ([EMAIL PROTECTED]) (gcc version 3.4.2) #152 Tue Apr 1 10:52:01 CDT 2008
Found legacy serial port 0 for /plb/opb/[EMAIL PROTECTED]
mem=ef600300, taddr=ef600300, irq=0, clk=11059200, speed=115200
Found legacy serial port 1 for /plb/opb/[EMAIL PROTECTED]
mem=ef600400, taddr=ef600400, irq=0, clk=11059200, speed=0
console [udbg0] enabled
Entering add_active_range(0, 0, 36864) 0 entries of 256 used
setup_arch: bootmem
arch: exit
Top of RAM: 0x9000000, Total RAM: 0x9000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 36864
Normal 36864 -> 36864
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 36864
On node 0 totalpages: 36864
DMA zone: 288 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 36576 pages, LIFO batch:7
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 36576
Kernel command line: root=/dev/vda rw debug
irq: Allocated host of type 2 @0xc03f3880
UIC0 (32 IRQ sources) at DCR 0xc0
irq: Default host set to @0xc03f3880
PID hash table entries: 1024 (order: 10, 4096 bytes)
time_init: decrementer frequency = 666.666660 MHz
time_init: processor frequency = 666.666660 MHz
clocksource: timebase mult[600000] shift[22] registered
clockevent: decrementer mult[aaaa] shift[16] cpu[0]
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 143060k/147456k available (2632k kernel code, 4252k reserved, 100k data, 125k bss, 132k init)
SLUB: Genslabs=10, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay loop... 2490.36 BogoMIPS (lpj=4980736)
Mount-cache hash table entries: 512
net_namespace: 156 bytes
NET: Registered protocol family 16
PCI host bridge /plb/[EMAIL PROTECTED] (primary) ranges:
MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000
IO 0x00000000e8000000..0x00000000e800ffff -> 0x0000000000000000
4xx PCI DMA offset set to 0x00000000
PCI: Probing PCI hardware
PCI: Hiding 4xx host bridge resources 0000:00:00.0
irq: irq_create_mapping(0xc03f3880, 0x1c)
irq: -> using host @c03f3880
irq: -> obtained virq 28
irq: irq_create_mapping(0xc03f3880, 0x1b)
irq: -> using host @c03f3880
irq: -> obtained virq 27
Time: timebase clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
irq: irq_create_mapping(0xc03f3880, 0x0)
irq: -> using host @c03f3880
irq: -> obtained virq 16
irq: irq_create_mapping(0xc03f3880, 0x1)
irq: -> using host @c03f3880
irq: -> obtained virq 17
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xef600300 (irq = 16) is a 16450
console handover: boot [udbg0] -> real [ttyS0]
irq: irq_create_mapping(0xc03f3880, 0x0)
irq: -> using host @c03f3880
irq: -> existing mapping on virq 16
ef600300.serial: ttyS0 at MMIO 0xef600300 (irq = 16) is a 16450
irq: irq_create_mapping(0xc03f3880, 0x1)
irq: -> using host @c03f3880
irq: -> existing mapping on virq 17
brd: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
pcnet32.c:v1.34 14.Aug.2007 [EMAIL PROTECTED]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
PCI: Enabling device 0000:00:01.0 (0000 -> 0001)
vda: unknown partition table
PCI: Enabling device 0000:00:02.0 (0000 -> 0001)
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 132k init
root:~> ### Application running ...
root:~> ls
bin etc home linuxrc sbin usr
dev ftp lib proc tmp var
root:~>-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
kvm-devel mailing list
kvm-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-devel
