Signed-off-by: Gerd Hoffmann <[EMAIL PROTECTED]>
---
arch/x86/Kconfig | 1 +
arch/x86/kernel/kvmclock.c | 86 ++++++++++++++++---------------------------
2 files changed, 33 insertions(+), 54 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index deb3049..b749c85 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -390,6 +390,7 @@ config VMI
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
+ select PARAVIRT_CLOCK
depends on !(X86_VISWS || X86_VOYAGER)
help
Turning on this option will allow you to run a paravirtualized clock
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 4bc1be5..135a8f7 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -18,6 +18,7 @@
#include <linux/clocksource.h>
#include <linux/kvm_para.h>
+#include <asm/pvclock.h>
#include <asm/arch_hooks.h>
#include <asm/msr.h>
#include <asm/apic.h>
@@ -37,17 +38,9 @@ early_param("no-kvmclock", parse_no_kvmclock);
/* The hypervisor will put information about time periodically here */
static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock);
-#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field
-
-static inline u64 kvm_get_delta(u64 last_tsc)
-{
- int cpu = smp_processor_id();
- u64 delta = native_read_tsc() - last_tsc;
- return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE;
-}
static struct kvm_wall_clock wall_clock;
-static cycle_t kvm_clock_read(void);
+
/*
* The wallclock is the time of day when we booted. Since then, some time may
* have elapsed since the hypervisor wrote the data. So we try to account for
@@ -55,35 +48,19 @@ static cycle_t kvm_clock_read(void);
*/
unsigned long kvm_get_wallclock(void)
{
- u32 wc_sec, wc_nsec;
- u64 delta;
+ struct kvm_vcpu_time_info *vcpu_time;
struct timespec ts;
- int version, nsec;
int low, high;
low = (int)__pa(&wall_clock);
high = ((u64)__pa(&wall_clock) >> 32);
-
- delta = kvm_clock_read();
-
native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
- do {
- version = wall_clock.wc_version;
- rmb();
- wc_sec = wall_clock.wc_sec;
- wc_nsec = wall_clock.wc_nsec;
- rmb();
- } while ((wall_clock.wc_version != version) || (version & 1));
-
- delta = kvm_clock_read() - delta;
- delta += wc_nsec;
- nsec = do_div(delta, NSEC_PER_SEC);
- set_normalized_timespec(&ts, wc_sec + delta, nsec);
- /*
- * Of all mechanisms of time adjustment I've tested, this one
- * was the champion!
- */
- return ts.tv_sec + 1;
+
+ vcpu_time = &get_cpu_var(hv_clock);
+ pvclock_read_wallclock(&wall_clock, vcpu_time, &ts);
+ put_cpu_var(hv_clock);
+
+ return ts.tv_sec;
}
int kvm_set_wallclock(unsigned long now)
@@ -91,28 +68,17 @@ int kvm_set_wallclock(unsigned long now)
return 0;
}
-/*
- * This is our read_clock function. The host puts an tsc timestamp each time
- * it updates a new time. Without the tsc adjustment, we can have a situation
- * in which a vcpu starts to run earlier (smaller system_time), but probes
- * time later (compared to another vcpu), leading to backwards time
- */
static cycle_t kvm_clock_read(void)
{
- u64 last_tsc, now;
- int cpu;
-
- preempt_disable();
- cpu = smp_processor_id();
-
- last_tsc = get_clock(cpu, tsc_timestamp);
- now = get_clock(cpu, system_time);
+ struct kvm_vcpu_time_info *src;
+ cycle_t ret;
- now += kvm_get_delta(last_tsc);
- preempt_enable();
-
- return now;
+ src = &get_cpu_var(hv_clock);
+ ret = pvclock_clocksource_read(src);
+ put_cpu_var(hv_clock);
+ return ret;
}
+
static struct clocksource kvm_clock = {
.name = "kvm-clock",
.read = kvm_clock_read,
@@ -123,13 +89,14 @@ static struct clocksource kvm_clock = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int kvm_register_clock(void)
+static int kvm_register_clock(char *txt)
{
int cpu = smp_processor_id();
int low, high;
low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1;
high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32);
-
+ printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n",
+ cpu, high, low, txt);
return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
}
@@ -140,12 +107,20 @@ static void kvm_setup_secondary_clock(void)
* Now that the first cpu already had this clocksource initialized,
* we shouldn't fail.
*/
- WARN_ON(kvm_register_clock());
+ WARN_ON(kvm_register_clock("secondary cpu clock"));
/* ok, done with our trickery, call native */
setup_secondary_APIC_clock();
}
#endif
+#ifdef CONFIG_SMP
+void __init kvm_smp_prepare_boot_cpu(void)
+{
+ WARN_ON(kvm_register_clock("primary cpu clock"));
+ native_smp_prepare_boot_cpu();
+}
+#endif
+
/*
* After the clock is registered, the host will keep writing to the
* registered memory location. If the guest happens to shutdown, this memory
@@ -174,7 +149,7 @@ void __init kvmclock_init(void)
return;
if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
- if (kvm_register_clock())
+ if (kvm_register_clock("boot clock"))
return;
pv_time_ops.get_wallclock = kvm_get_wallclock;
pv_time_ops.set_wallclock = kvm_set_wallclock;
@@ -182,6 +157,9 @@ void __init kvmclock_init(void)
#ifdef CONFIG_X86_LOCAL_APIC
pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
#endif
+#ifdef CONFIG_SMP
+ smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
+#endif
machine_ops.shutdown = kvm_shutdown;
#ifdef CONFIG_KEXEC
machine_ops.crash_shutdown = kvm_crash_shutdown;
--
1.5.4.1
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
kvm-devel mailing list
kvm-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-devel
