> -----Original Message----- > From: Alexander Graf [mailto:ag...@suse.de] > Sent: Friday, April 26, 2013 4:46 PM > To: Bhushan Bharat-R65777 > Cc: kvm-ppc@vger.kernel.org; k...@vger.kernel.org; Wood Scott-B07421; Bhushan > Bharat-R65777 > Subject: Re: [PATCH 7/7 v3] KVM: PPC: Add userspace debug stub support > > > On 08.04.2013, at 12:32, Bharat Bhushan wrote: > > > From: Bharat Bhushan <bharat.bhus...@freescale.com> > > > > This patch adds the debug stub support on booke/bookehv. > > Now QEMU debug stub can use hw breakpoint, watchpoint and software > > breakpoint to debug guest. > > > > Debug registers are saved/restored on vcpu_put()/vcpu_get(). > > Also the debug registers are saved restored only if guest > > is using debug resources. > > > > Currently we do not support debug resource emulation to guest, > > so always exit to user space irrespective of user space is expecting > > the debug exception or not. This is unexpected event and let us > > leave the action on user space. This is similar to what it was before, > > only thing is that now we have proper exit state available to user space. > > > > Signed-off-by: Bharat Bhushan <bharat.bhus...@freescale.com> > > --- > > arch/powerpc/include/asm/kvm_host.h | 8 + > > arch/powerpc/include/uapi/asm/kvm.h | 22 +++- > > arch/powerpc/kvm/booke.c | 242 > > ++++++++++++++++++++++++++++++++--- > > arch/powerpc/kvm/booke.h | 5 + > > 4 files changed, 255 insertions(+), 22 deletions(-) > > > > diff --git a/arch/powerpc/include/asm/kvm_host.h > b/arch/powerpc/include/asm/kvm_host.h > > index e34f8fe..b9ad20f 100644 > > --- a/arch/powerpc/include/asm/kvm_host.h > > +++ b/arch/powerpc/include/asm/kvm_host.h > > @@ -505,7 +505,15 @@ struct kvm_vcpu_arch { > > u32 mmucfg; > > u32 epr; > > u32 crit_save; > > + > > + /* Flag indicating that debug registers are used by guest */ > > + bool debug_active; > > + /* for save/restore thread->dbcr0 on vcpu run/heavyweight_exit */ > > + u32 saved_dbcr0; > > + /* guest debug registers*/ > > struct kvmppc_booke_debug_reg dbg_reg; > > + /* shadow debug registers */ > > + struct kvmppc_booke_debug_reg shadow_dbg_reg; > > #endif > > gpa_t paddr_accessed; > > gva_t vaddr_accessed; > > diff --git a/arch/powerpc/include/uapi/asm/kvm.h > b/arch/powerpc/include/uapi/asm/kvm.h > > index c0c38ed..d7ce449 100644 > > --- a/arch/powerpc/include/uapi/asm/kvm.h > > +++ b/arch/powerpc/include/uapi/asm/kvm.h > > @@ -25,6 +25,7 @@ > > /* Select powerpc specific features in <linux/kvm.h> */ > > #define __KVM_HAVE_SPAPR_TCE > > #define __KVM_HAVE_PPC_SMT > > +#define __KVM_HAVE_GUEST_DEBUG > > > > struct kvm_regs { > > __u64 pc; > > @@ -267,7 +268,24 @@ struct kvm_fpu { > > __u64 fpr[32]; > > }; > > > > +/* > > + * Defines for h/w breakpoint, watchpoint (read, write or both) and > > + * software breakpoint. > > + * These are used as "type" in KVM_SET_GUEST_DEBUG ioctl and "status" > > + * for KVM_DEBUG_EXIT. > > + */ > > +#define KVMPPC_DEBUG_NONE 0x0 > > +#define KVMPPC_DEBUG_BREAKPOINT (1UL << 1) > > +#define KVMPPC_DEBUG_WATCH_WRITE (1UL << 2) > > +#define KVMPPC_DEBUG_WATCH_READ (1UL << 3) > > struct kvm_debug_exit_arch { > > + __u64 address; > > + /* > > + * exiting to userspace because of h/w breakpoint, watchpoint > > + * (read, write or both) and software breakpoint. > > + */ > > + __u32 status; > > + __u32 reserved; > > }; > > > > /* for KVM_SET_GUEST_DEBUG */ > > @@ -279,10 +297,6 @@ struct kvm_guest_debug_arch { > > * Type denotes h/w breakpoint, read watchpoint, write > > * watchpoint or watchpoint (both read and write). > > */ > > -#define KVMPPC_DEBUG_NONE 0x0 > > -#define KVMPPC_DEBUG_BREAKPOINT (1UL << 1) > > -#define KVMPPC_DEBUG_WATCH_WRITE (1UL << 2) > > -#define KVMPPC_DEBUG_WATCH_READ (1UL << 3) > > __u32 type; > > __u32 reserved; > > } bp[16]; > > diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c > > index 97ae158..0e93416 100644 > > --- a/arch/powerpc/kvm/booke.c > > +++ b/arch/powerpc/kvm/booke.c > > @@ -133,6 +133,29 @@ static void kvmppc_vcpu_sync_fpu(struct kvm_vcpu *vcpu) > > #endif > > } > > > > +static void kvmppc_vcpu_sync_debug(struct kvm_vcpu *vcpu) > > +{ > > + /* Synchronize guest's desire to get debug interrupts into shadow MSR */ > > +#ifndef CONFIG_KVM_BOOKE_HV > > + vcpu->arch.shadow_msr &= ~MSR_DE; > > + vcpu->arch.shadow_msr |= vcpu->arch.shared->msr & MSR_DE; > > +#endif > > + > > + /* Force enable debug interrupts when user space wants to debug */ > > + if (vcpu->guest_debug) { > > +#ifdef CONFIG_KVM_BOOKE_HV > > + /* > > + * Since there is no shadow MSR, sync MSR_DE into the guest > > + * visible MSR. > > + */ > > + vcpu->arch.shared->msr |= MSR_DE; > > +#else > > + vcpu->arch.shadow_msr |= MSR_DE; > > + vcpu->arch.shared->msr &= ~MSR_DE; > > +#endif > > + } > > +} > > + > > /* > > * Helper function for "full" MSR writes. No need to call this if only > > * EE/CE/ME/DE/RI are changing. > > @@ -150,6 +173,7 @@ void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr) > > kvmppc_mmu_msr_notify(vcpu, old_msr); > > kvmppc_vcpu_sync_spe(vcpu); > > kvmppc_vcpu_sync_fpu(vcpu); > > + kvmppc_vcpu_sync_debug(vcpu); > > } > > > > static void kvmppc_booke_queue_irqprio(struct kvm_vcpu *vcpu, > > @@ -646,6 +670,46 @@ int kvmppc_core_check_requests(struct kvm_vcpu *vcpu) > > return r; > > } > > > > +static void kvmppc_load_usespace_gebug(void) > > ...
Please tell What does "..." mean. Does that mean next comment is about the above function? > > > +{ > > + switch_booke_debug_regs(¤t->thread); > > +} > > + > > +static void kvmppc_booke_vcpu_load_debug_regs(struct kvm_vcpu *vcpu) > > +{ > > + if (!vcpu->arch.debug_active) > > + return; > > + > > + /* Disable all debug events and clead pending debug events */ > > + mtspr(SPRN_DBCR0, 0x0); > > + kvmppc_clear_dbsr(); > > + > > + /* > > + * Check whether guest still need debug resource, if not then there > > + * is no need to restore guest context. > > + */ > > + if (!vcpu->arch.shadow_dbg_reg.dbcr0) > > + return; > > + > > + /* Load Guest Context */ > > + mtspr(SPRN_DBCR1, vcpu->arch.shadow_dbg_reg.dbcr1); > > + mtspr(SPRN_DBCR2, vcpu->arch.shadow_dbg_reg.dbcr2); > > +#ifdef CONFIG_KVM_E500MC > > + mtspr(SPRN_DBCR4, vcpu->arch.shadow_dbg_reg.dbcr4); > > You need to make sure DBCR4 is 0 when you leave things back to normal user > space. Otherwise guest debug can interfere with host debug. ok > > > +#endif > > + mtspr(SPRN_IAC1, vcpu->arch.shadow_dbg_reg.iac[0]); > > + mtspr(SPRN_IAC2, vcpu->arch.shadow_dbg_reg.iac[1]); > > +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 > > + mtspr(SPRN_IAC3, vcpu->arch.shadow_dbg_reg.iac[2]); > > + mtspr(SPRN_IAC4, vcpu->arch.shadow_dbg_reg.iac[3]); > > +#endif > > + mtspr(SPRN_DAC1, vcpu->arch.shadow_dbg_reg.dac[0]); > > + mtspr(SPRN_DAC2, vcpu->arch.shadow_dbg_reg.dac[1]); > > + > > + /* Enable debug events after other debug registers restored */ > > + mtspr(SPRN_DBCR0, vcpu->arch.shadow_dbg_reg.dbcr0); > > +} > > All of the code above looks suspiciously similar to prime_debug_regs();. Can't > we somehow reuse that? I think we can if - Save thread->debug_regs in local data structure - Load vcpu->arch->debug_regs in thread->debug_regs - Call prime_debug_regs(); - Restore thread->debug_regs from local save values in first step > > > + > > int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) > > { > > int ret, s; > > @@ -693,11 +757,25 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct > kvm_vcpu *vcpu) > > kvmppc_load_guest_fp(vcpu); > > #endif > > > > + /* > > + * Clear current->thread.dbcr0 so that kernel does not > > + * restore h/w registers on context switch in vcpu running state. > > + */ > > + vcpu->arch.debug_active = 1; > > = true; Ok > > > + vcpu->arch.saved_dbcr0 = current->thread.dbcr0; > > + current->thread.dbcr0 = 0; > > + kvmppc_booke_vcpu_load_debug_regs(vcpu); > > static void switch_booke_debug_regs(struct thread_struct *new_thread) > { > if ((current->thread.dbcr0 & DBCR0_IDM) > || (new_thread->dbcr0 & DBCR0_IDM)) > prime_debug_regs(new_thread); > } > > The kernel will also restore debug state if the process we come from has > debugging enabled. Please adjust the comment accordingly. kvmppc_booke_vcpu_load_debug_regs(vcpu); cleares DBSR and DBCR0, even if previous process have used debug registers. Is not that sufficient? I do not think we should load all other registers. > > > + > > ret = __kvmppc_vcpu_run(kvm_run, vcpu); > > > > /* No need for kvm_guest_exit. It's done in handle_exit. > > We also get here with interrupts enabled. */ > > > > + /* Restore thread->dbcr0 */ > > + vcpu->arch.debug_active = 0; > > + current->thread.dbcr0 = vcpu->arch.saved_dbcr0; > > + kvmppc_load_usespace_gebug(); > > + > > #ifdef CONFIG_PPC_FPU > > kvmppc_save_guest_fp(vcpu); > > > > @@ -753,6 +831,36 @@ static int emulation_exit(struct kvm_run *run, struct > kvm_vcpu *vcpu) > > } > > } > > > > +/* > > + * Currently we do not support debug resource emulation to guest, > > + * so always exit to user space irrespective of user space is > > + * expecting the debug exception or not. This is unexpected event > > + * and let us leave the action on user space. > > + */ > > +static int kvmppc_handle_debug(struct kvm_run *run, struct kvm_vcpu *vcpu) > > +{ > > + u32 dbsr = mfspr(SPRN_DBSR); > > + > > + kvmppc_clear_dbsr(); > > + run->debug.arch.status = 0; > > + run->debug.arch.address = vcpu->arch.pc; > > + > > + if (dbsr & (DBSR_IAC1 | DBSR_IAC2 | DBSR_IAC3 | DBSR_IAC4)) { > > + run->debug.arch.status |= KVMPPC_DEBUG_BREAKPOINT; > > + } else { > > + if (dbsr & (DBSR_DAC1W | DBSR_DAC2W)) > > + run->debug.arch.status |= KVMPPC_DEBUG_WATCH_WRITE; > > + else if (dbsr & (DBSR_DAC1R | DBSR_DAC2R)) > > + run->debug.arch.status |= KVMPPC_DEBUG_WATCH_READ; > > + if (dbsr & (DBSR_DAC1R | DBSR_DAC1W)) > > + run->debug.arch.address = > > vcpu->arch.shadow_dbg_reg.dac[0]; > > + else if (dbsr & (DBSR_DAC2R | DBSR_DAC2W)) > > + run->debug.arch.address = > > vcpu->arch.shadow_dbg_reg.dac[1]; > > + } > > + > > + return RESUME_HOST; > > +} > > + > > static void kvmppc_fill_pt_regs(struct pt_regs *regs) > > { > > ulong r1, ip, msr, lr; > > @@ -1112,18 +1220,10 @@ int kvmppc_handle_exit(struct kvm_run *run, struct > kvm_vcpu *vcpu, > > } > > > > case BOOKE_INTERRUPT_DEBUG: { > > - u32 dbsr; > > - > > - vcpu->arch.pc = mfspr(SPRN_CSRR0); > > - > > - /* clear IAC events in DBSR register */ > > - dbsr = mfspr(SPRN_DBSR); > > - dbsr &= DBSR_IAC1 | DBSR_IAC2 | DBSR_IAC3 | DBSR_IAC4; > > - mtspr(SPRN_DBSR, dbsr); > > - > > - run->exit_reason = KVM_EXIT_DEBUG; > > + r = kvmppc_handle_debug(run, vcpu); > > + if (r == RESUME_HOST) > > + run->exit_reason = KVM_EXIT_DEBUG; > > kvmppc_account_exit(vcpu, DEBUG_EXITS); > > - r = RESUME_HOST; > > break; > > } > > > > @@ -1174,7 +1274,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) > > kvmppc_set_msr(vcpu, 0); > > > > #ifndef CONFIG_KVM_BOOKE_HV > > - vcpu->arch.shadow_msr = MSR_USER | MSR_DE | MSR_IS | MSR_DS; > > + vcpu->arch.shadow_msr = MSR_USER | MSR_IS | MSR_DS; > > vcpu->arch.shadow_pid = 1; > > vcpu->arch.shared->msr = 0; > > #endif > > @@ -1529,12 +1629,6 @@ int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, > struct kvm_one_reg *reg) > > return r; > > } > > > > -int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, > > - struct kvm_guest_debug *dbg) > > -{ > > - return -EINVAL; > > -} > > - > > int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) > > { > > return -ENOTSUPP; > > @@ -1640,16 +1734,128 @@ void kvmppc_decrementer_func(unsigned long data) > > kvmppc_set_tsr_bits(vcpu, TSR_DIS); > > } > > > > +static void kvmppc_booke_vcpu_put_debug_regs(struct kvm_vcpu *vcpu) > > +{ > > + /* Disable all debug events First */ > > first > > > + mtspr(SPRN_DBCR0, 0x0); > > + /* Disable pending debug event by clearing DBSR */ > > + kvmppc_clear_dbsr(); > > kvmppc_handle_debug() happens with preemption enabled, no? Want to clarify, preemption will be enabled on calling local_irq_enable(); in kvmppc_handle_exit()? > So we can have a > debug event that gets cleared on preempt by this. Should we read the DBSR in before local_irq_enable() in kvmppc_handle_exit()? > > > +} > > + > > +int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, > > + struct kvm_guest_debug *dbg) > > +{ > > + struct kvmppc_booke_debug_reg *dbg_reg; > > + int n, b = 0, w = 0; > > + const u32 bp_code[] = { > > + DBCR0_IAC1 | DBCR0_IDM, > > + DBCR0_IAC2 | DBCR0_IDM, > > + DBCR0_IAC3 | DBCR0_IDM, > > + DBCR0_IAC4 | DBCR0_IDM > > + }; > > + const u32 wp_code[] = { > > + DBCR0_DAC1W | DBCR0_IDM, > > + DBCR0_DAC2W | DBCR0_IDM, > > + DBCR0_DAC1R | DBCR0_IDM, > > + DBCR0_DAC2R | DBCR0_IDM > > + }; > > + > > + if (!(dbg->control & KVM_GUESTDBG_ENABLE)) { > > + /* Clear All debug events */ > > + vcpu->arch.shadow_dbg_reg.dbcr0 = 0; > > + vcpu->guest_debug = 0; > > +#ifdef CONFIG_KVM_BOOKE_HV > > + /* > > + * When user space is not using the debug resources > > + * then allow guest to change the MSR.DE. > > + */ > > + vcpu->arch.shadow_msrp &= ~MSRP_DEP; > > +#endif > > + return 0; > > + } > > + > > +#ifdef CONFIG_KVM_BOOKE_HV > > + /* > > + * When user space is using the debug resource then > > + * do not allow guest to change the MSR.DE. > > + */ > > + vcpu->arch.shadow_msrp &= ~MSRP_DEP; > > This is supposed to be |= right? Yes :-) > > > +#endif > > + vcpu->guest_debug = dbg->control; > > + vcpu->arch.shadow_dbg_reg.dbcr0 = 0; > > + /* Set DBCR0_EDM in guest visible DBCR0 register. */ > > + vcpu->arch.dbg_reg.dbcr0 = DBCR0_EDM; > > + > > + if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) > > + vcpu->arch.shadow_dbg_reg.dbcr0 |= DBCR0_IDM | DBCR0_IC; > > + > > + if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) > > + /* Code below handles only HW breakpoints */ > > Please move the comment out of the one-lined branch. Just put it below the > return. Ok > > > + return 0; > > + > > + dbg_reg = &(vcpu->arch.shadow_dbg_reg); > > + > > + /* > > + * On BOOKE (e500v2); Set DBCR1 and DBCR2 to allow debug events > > + * to occur when MSR.PR is set. > > + * On BOOKE-HV (e500mc+); MSR.PR = 0 when guest is running. So we > > + * should clear DBCR1 and DBCR2. And EPCR.DUVD is used to control > > + * that debug events will not come in hypervisor (GS = 0). > > + */ > > +#ifdef CONFIG_KVM_BOOKE_HV > > + dbg_reg->dbcr1 = 0; > > + dbg_reg->dbcr2 = 0; > > +#else > > + dbg_reg->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | DBCR1_IAC3US | > > + DBCR1_IAC4US; > > + dbg_reg->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; > > +#endif > > + > > + for (n = 0; n < (KVMPPC_BOOKE_IAC_NUM + KVMPPC_BOOKE_DAC_NUM); n++) { > > + u32 type = dbg->arch.bp[n].type; > > + > > + if (!type) > > + continue; > > Scott's comment on why a zero-type is different from any other invalid type is > still outstanding I think. Userspce does following - dbg->arch.bp[] is first zero initialized. So dbg->arch.bp[n].type is 0 (KVMPPC_DEBUG_NONE) - Then set following for valid breakpoints/watchpoints: -- dbg->arch.bp[n].type (KVMPPC_DEBUG_BREAKPOINT or KVMPPC_DEBUG_WATCH_WRITE or KVMPPC_DEBUG_WATCH_READ) -- dbg->arch.bp[n].addr I tried to avoid loop when type is 0 (probably saying type == KVMPPC_DEBUG_NONE should be more clear). if type is invalid then should we return -EINVAL. -Bharat > > > Alex > > > + > > + if (type & (KVMPPC_DEBUG_WATCH_READ | > > + KVMPPC_DEBUG_WATCH_WRITE)) { > > + if (w >= KVMPPC_BOOKE_DAC_NUM) > > + return -EINVAL; > > + > > + if (type & KVMPPC_DEBUG_WATCH_READ) > > + dbg_reg->dbcr0 |= wp_code[w + 2]; > > + if (type & KVMPPC_DEBUG_WATCH_WRITE) > > + dbg_reg->dbcr0 |= wp_code[w]; > > + > > + dbg_reg->dac[w] = dbg->arch.bp[n].addr; > > + w++; > > + } else if (type & KVMPPC_DEBUG_BREAKPOINT) { > > + if (b >= KVMPPC_BOOKE_IAC_NUM) > > + return -EINVAL; > > + > > + dbg_reg->dbcr0 |= bp_code[b]; > > + dbg_reg->iac[b] = dbg->arch.bp[n].addr; > > + b++; > > + } > > + } > > + > > + return 0; > > +} > > + > > void kvmppc_booke_vcpu_load(struct kvm_vcpu *vcpu, int cpu) > > { > > vcpu->cpu = smp_processor_id(); > > current->thread.kvm_vcpu = vcpu; > > + > > + kvmppc_booke_vcpu_load_debug_regs(vcpu); > > } > > > > void kvmppc_booke_vcpu_put(struct kvm_vcpu *vcpu) > > { > > current->thread.kvm_vcpu = NULL; > > vcpu->cpu = -1; > > + > > + kvmppc_booke_vcpu_put_debug_regs(vcpu); > > } > > > > int __init kvmppc_booke_init(void) > > diff --git a/arch/powerpc/kvm/booke.h b/arch/powerpc/kvm/booke.h > > index 5fd1ba6..a1ff67d 100644 > > --- a/arch/powerpc/kvm/booke.h > > +++ b/arch/powerpc/kvm/booke.h > > @@ -129,4 +129,9 @@ static inline void kvmppc_save_guest_fp(struct kvm_vcpu > *vcpu) > > giveup_fpu(current); > > #endif > > } > > + > > +static inline void kvmppc_clear_dbsr(void) > > +{ > > + mtspr(SPRN_DBSR, mfspr(SPRN_DBSR)); > > +} > > #endif /* __KVM_BOOKE_H__ */ > > -- > > 1.7.0.4 > > > > > > -- > > To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html