On Mon, May 19, 2014 at 06:37:24PM -0600, Alex Williamson wrote:
>On Tue, 2014-05-20 at 10:22 +1000, Gavin Shan wrote:
>> On Mon, May 19, 2014 at 04:33:10PM -0600, Alex Williamson wrote:
>> >On Wed, 2014-05-14 at 14:11 +1000, Gavin Shan wrote:
>> >> The patch adds new IOCTL command VFIO_EEH_INFO to VFIO container
>> >> to support EEH functionality for PCI devices, which have been
>> >> passed from host to guest via VFIO.
>>
>> Thanks for your comments, Alex.W :-)
>>
>> >
>> >Some comments throughout, but overall this seems to forgo every bit of
>> >the device ownership and protection model used by VFIO and lets the user
>> >pick arbitrary host devices and do various operations, mostly unchecked.
>> >That's not acceptable.
>> >
>>
>> As what I replied to patch[2], I'm going to let VFIO-PCI-dev fd handle
>> the newly introduced IOCTL command. That way, we should follow the VFIO
>> design principles (ownership and protection) because VFIO-PCI-dev fd
>> is owned by QEMU process usually.
>>
>> Also, the address mapping maintained in EEH will be removed.
>>
>> >> Signed-off-by: Gavin Shan <gws...@linux.vnet.ibm.com>
>> >> ---
>> >> arch/powerpc/platforms/powernv/Makefile | 1 +
>> >> arch/powerpc/platforms/powernv/eeh-vfio.c | 593
>> >> ++++++++++++++++++++++++++++++
>> >> drivers/vfio/vfio_iommu_spapr_tce.c | 12 +
>> >> include/uapi/linux/vfio.h | 57 +++
>> >> 4 files changed, 663 insertions(+)
>> >> create mode 100644 arch/powerpc/platforms/powernv/eeh-vfio.c
>> >>
>> >> diff --git a/arch/powerpc/platforms/powernv/Makefile
>> >> b/arch/powerpc/platforms/powernv/Makefile
>> >> index 63cebb9..2b15a03 100644
>> >> --- a/arch/powerpc/platforms/powernv/Makefile
>> >> +++ b/arch/powerpc/platforms/powernv/Makefile
>> >> @@ -6,5 +6,6 @@ obj-y += opal-msglog.o
>> >> obj-$(CONFIG_SMP) += smp.o
>> >> obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
>> >> obj-$(CONFIG_EEH) += eeh-ioda.o eeh-powernv.o
>> >> +obj-$(CONFIG_VFIO_EEH) += eeh-vfio.o
>> >> obj-$(CONFIG_PPC_SCOM) += opal-xscom.o
>> >> obj-$(CONFIG_MEMORY_FAILURE) += opal-memory-errors.o
>> >> diff --git a/arch/powerpc/platforms/powernv/eeh-vfio.c
>> >> b/arch/powerpc/platforms/powernv/eeh-vfio.c
>> >> new file mode 100644
>> >> index 0000000..69d5f2d
>> >> --- /dev/null
>> >> +++ b/arch/powerpc/platforms/powernv/eeh-vfio.c
>> >> @@ -0,0 +1,593 @@
>> >> +/*
>> >> + * The file intends to support EEH funtionality for those PCI devices,
>> >> + * which have been passed through from host to guest via VFIO. So this
>> >> + * file is naturally part of VFIO implementation on PowerNV platform.
>> >> + *
>> >> + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2014.
>> >> + *
>> >> + * This program is free software; you can redistribute it and/or modify
>> >> + * it under the terms of the GNU General Public License as published by
>> >> + * the Free Software Foundation; either version 2 of the License, or
>> >> + * (at your option) any later version.
>> >> + */
>> >> +
>> >> +#include <linux/init.h>
>> >> +#include <linux/io.h>
>> >> +#include <linux/irq.h>
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/kvm_host.h>
>> >> +#include <linux/msi.h>
>> >> +#include <linux/pci.h>
>> >> +#include <linux/string.h>
>> >> +#include <linux/vfio.h>
>> >> +
>> >> +#include <asm/eeh.h>
>> >> +#include <asm/eeh_event.h>
>> >> +#include <asm/io.h>
>> >> +#include <asm/iommu.h>
>> >> +#include <asm/opal.h>
>> >> +#include <asm/msi_bitmap.h>
>> >> +#include <asm/pci-bridge.h>
>> >> +#include <asm/ppc-pci.h>
>> >> +#include <asm/tce.h>
>> >> +#include <asm/uaccess.h>
>> >> +
>> >> +#include "powernv.h"
>> >> +#include "pci.h"
>> >> +
>> >> +static int powernv_eeh_vfio_map(struct vfio_eeh_info *info)
>> >> +{
>> >> + struct pci_bus *bus, *pe_bus;
>> >> + struct pci_dev *pdev;
>> >> + struct eeh_dev *edev;
>> >> + struct eeh_pe *pe;
>> >> + int domain, bus_no, devfn;
>> >> +
>> >> + /* Host address */
>> >> + domain = info->map.host_domain;
>> >> + bus_no = (info->map.host_cfg_addr >> 8) & 0xff;
>> >> + devfn = info->map.host_cfg_addr & 0xff;
>> >
>> >Where are we validating that the user has any legitimate claim to be
>> >touching this device?
>> >
>>
>> I'll let VFIO-PCI-dev fd handle the IOCTL command. With that, we shouldn't
>> have the problem.
>>
>> >> + /* Find PCI bus */
>> >> + bus = pci_find_bus(domain, bus_no);
>> >> + if (!bus) {
>> >> + pr_warn("%s: PCI bus %04x:%02x not found\n",
>> >> + __func__, domain, bus_no);
>> >> + return -ENODEV;
>> >> + }
>> >> +
>> >> + /* Find PCI device */
>> >> + pdev = pci_get_slot(bus, devfn);
>> >> + if (!pdev) {
>> >> + pr_warn("%s: PCI device %04x:%02x:%02x.%01x not found\n",
>> >> + __func__, domain, bus_no,
>> >> + PCI_SLOT(devfn), PCI_FUNC(devfn));
>> >> + return -ENODEV;
>> >> + }
>> >> +
>> >> + /* No EEH device - almost impossible */
>> >> + edev = pci_dev_to_eeh_dev(pdev);
>> >> + if (unlikely(!edev)) {
>> >> + pci_dev_put(pdev);
>> >> + pr_warn("%s: No EEH dev for PCI device %s\n",
>> >> + __func__, pci_name(pdev));
>> >> + return -ENODEV;
>> >> + }
>> >> +
>> >> + /* Doesn't support PE migration between different PHBs */
>> >> + pe = edev->pe;
>> >> + if (!eeh_pe_passed(pe)) {
>> >> + pe_bus = eeh_pe_bus_get(pe);
>> >> + BUG_ON(!pe_bus);
>> >
>> >Can a user trigger this maliciously?
>> >
>> >> +
>> >> + /* PE# has format 00BBSS00 */
>> >> + pe->guest_addr.buid = info->map.guest_buid;
>> >> + pe->guest_addr.pe_addr = pe_bus->number << 16;
>> >> + eeh_pe_set_passed(pe, true);
>> >> + } else if (pe->guest_addr.buid != info->map.guest_buid) {
>> >> + pci_dev_put(pdev);
>> >> + pr_warn("%s: Mismatched PHB BUID (0x%llx, 0x%llx)\n",
>> >> + __func__, pe->guest_addr.buid, info->map.guest_buid);
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> + edev->guest_addr.buid = info->map.guest_buid;
>> >> + edev->guest_addr.config_addr = info->map.guest_cfg_addr;
>> >> + eeh_dev_set_passed(edev, true);
>> >> +
>> >> + pr_debug("EEH: Host PCI dev %s to %llx-%02x:%02x.%01x\n",
>> >> + pci_name(pdev), info->map.guest_buid,
>> >> + (info->map.guest_cfg_addr >> 8) & 0xFF,
>> >> + PCI_SLOT(info->map.guest_cfg_addr & 0xFF),
>> >> + PCI_FUNC(info->map.guest_cfg_addr & 0xFF));
>> >> +
>> >> + pci_dev_put(pdev);
>> >> + return 0;
>> >> +}
>> >
>> >So the effect of this function is that a user gets to setup an arbitrary
>> >guest mapping for an arbitrary host device and associated pe. Is that
>> >right? It seems bad.
>> >
>>
>> I'm going to remove this mapping in next revision.
>>
>> >> +
>> >> +static int powernv_eeh_vfio_unmap(struct vfio_eeh_info *info)
>> >> +{
>> >> + struct eeh_vfio_pci_addr addr;
>> >> + struct pci_dev *pdev;
>> >> + struct eeh_dev *edev, *tmp;
>> >> + struct eeh_pe *pe;
>> >> + bool passed;
>> >> +
>> >> + /* Get EEH device */
>> >> + addr.buid = info->unmap.buid;
>> >> + addr.config_addr = info->unmap.cfg_addr;
>> >> + edev = eeh_vfio_dev_get(&addr);
>> >
>> >eeh_vfio_dev_get() just looks for a "passed" dev and a match for a well
>> >known address space. Seems very exploitable.
>> >
>> >> + if (!edev) {
>> >> + pr_warn("%s: Cannot find %llx:%02x:%02x.%01x\n",
>> >> + __func__, info->unmap.buid,
>> >> + (info->unmap.cfg_addr >> 8) & 0xFF,
>> >> + PCI_SLOT(info->unmap.cfg_addr & 0xFF),
>> >> + PCI_FUNC(info->unmap.cfg_addr & 0xFF));
>> >> + return -ENODEV;
>> >> + }
>> >> +
>> >> + /* Return EEH device */
>> >> + memset(&edev->guest_addr, 0, sizeof(edev->guest_addr));
>> >> + eeh_dev_set_passed(edev, false);
>> >> + pdev = eeh_dev_to_pci_dev(edev);
>> >> + pr_debug("EEH: Host PCI dev %s returned\n",
>> >> + pdev ? pci_name(pdev) : "NULL");
>> >> +
>> >> + /* Return PE if no EEH device is owned by guest */
>> >> + pe = edev->pe;
>> >> + passed = false;
>> >> + eeh_pe_for_each_dev(pe, edev, tmp) {
>> >> + pdev = eeh_dev_to_pci_dev(edev);
>> >> + if (pdev && pdev->subordinate)
>> >> + continue;
>> >> +
>> >> + if (eeh_dev_passed(edev)) {
>> >> + passed = true;
>> >> + break;
>> >> + }
>> >> + }
>> >> +
>> >> + if (!passed) {
>> >> + memset(&pe->guest_addr, 0, sizeof(pe->guest_addr));
>> >> + eeh_pe_set_passed(pe, false);
>> >> + pr_debug("EEH: PHB#%x-PE#%x returned to host\n",
>> >> + pe->phb->global_number, pe->addr);
>> >> + }
>> >> +
>> >> + return 0;
>> >> +}
>> >> +
>> >> +static int powernv_eeh_vfio_set_option(struct vfio_eeh_info *info)
>> >> +{
>> >> + struct pnv_phb *phb;
>> >> + struct eeh_dev *edev;
>> >> + struct eeh_pe *pe;
>> >> + struct eeh_vfio_pci_addr addr;
>> >> + int opcode = info->option.option;
>> >> + int ret = 0;
>> >> +
>> >> + /* Check opcode */
>> >> + if (opcode < EEH_OPT_DISABLE || opcode > EEH_OPT_THAW_DMA) {
>> >> + pr_warn("%s: opcode %d out of range (%d, %d)\n",
>> >> + __func__, opcode, EEH_OPT_DISABLE, EEH_OPT_THAW_DMA);
>> >> + ret = 3;
>> >
>> >Please don't make up arbitrary return values.
>> >
>>
>> Nope, it will be turned to "-3" eventually by QEMU.
>
>Don't assume QEMU is your userspace.
>
>> That means "Invalid Parameter"
>> defined in PAPR spec.
>
>Is there value in matching the PAPR spec (which most people can't read)?
>If there is...
>
>> The IOCTL command handler return 3 values:
>>
>> < 0: Linux kernel error. For example, error from copy_from_user().
>> > 0: Error code to the EEH RTAS request, which will be returned to guest.
>> = 0: Success
>
>Maybe the ioctl return should match normal ioctl return values and the
>EEH error code can be stored somewhere in the structure.
>
Good idea and will apply it to next revision. Thanks.
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /* Option "enable" uses PCI config address */
>> >> + if (opcode == EEH_OPT_ENABLE) {
>> >> + addr.buid = info->option.buid;
>> >> + addr.config_addr = (info->option.addr >> 8) & 0xFFFF;
>> >> + edev = eeh_vfio_dev_get(&addr);
>> >> + if (!edev) {
>> >> + pr_warn("%s: Cannot find %llx:%02x:%02x.%01x\n",
>> >> + __func__, addr.buid,
>> >> + (addr.config_addr >> 8) & 0xFF,
>> >> + PCI_SLOT(addr.config_addr & 0xFF),
>> >> + PCI_FUNC(addr.config_addr & 0xFF));
>> >> + ret = 7;
>> >> + goto out;
>> >> + }
>> >> + phb = edev->phb->private_data;
>> >> + } else {
>> >> + addr.buid = info->option.buid;
>> >> + addr.pe_addr = info->option.addr;
>> >> + pe = eeh_vfio_pe_get(&addr);
>> >> + if (!pe) {
>> >> + pr_warn("%s: Cannot find PE %llx:%x\n",
>> >> + __func__, addr.buid, addr.pe_addr);
>> >> + ret = 7;
>> >> + goto out;
>> >> + }
>> >> + phb = pe->phb->private_data;
>> >> + }
>> >> +
>> >> + /* Insure that the EEH stuff has been initialized */
>> >> + if (!(phb->flags & PNV_PHB_FLAG_EEH)) {
>> >> + pr_warn("%s: EEH disabled on PHB#%d\n",
>> >> + __func__, phb->hose->global_number);
>> >> + ret = 7;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /*
>> >> + * The EEH functionality has been enabled on all PEs
>> >> + * by default. So just return success. The same situation
>> >> + * would be applied while we disable EEH functionality.
>> >> + * However, the guest isn't expected to disable that
>> >> + * at all.
>> >> + */
>> >> + if (opcode == EEH_OPT_DISABLE ||
>> >> + opcode == EEH_OPT_ENABLE) {
>> >> + ret = 0;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /*
>> >> + * Call into the IODA dependent backend in order
>> >> + * to enable DMA or MMIO for the indicated PE.
>> >> + */
>> >> + if (phb->eeh_ops && phb->eeh_ops->set_option) {
>> >> + if (phb->eeh_ops->set_option(pe, opcode)) {
>> >> + pr_warn("%s: Failure from backend\n",
>> >> + __func__);
>> >> + ret = 1;
>> >> + }
>> >> + } else {
>> >> + pr_warn("%s: Unsupported request\n",
>> >> + __func__);
>> >> + ret = 7;
>> >> + }
>> >> +
>> >> +out:
>> >> + return ret;
>> >> +}
>> >> +
>> >> +static int powernv_eeh_vfio_get_addr(struct vfio_eeh_info *info)
>> >> +{
>> >> + struct pnv_phb *phb;
>> >> + struct eeh_dev *edev;
>> >> + struct eeh_vfio_pci_addr addr;
>> >> + int opcode = info->addr.option;
>> >> + int ret = 0;
>> >> +
>> >> + /* Check opcode */
>> >> + if (opcode != 0 && opcode != 1) {
>> >> + pr_warn("%s: opcode %d out of range (0, 1)\n",
>> >> + __func__, opcode);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /* Find EEH device */
>> >> + addr.buid = info->addr.buid;
>> >> + addr.config_addr = (info->addr.cfg_addr >> 8 ) & 0xFFFF;
>> >> + edev = eeh_vfio_dev_get(&addr);
>> >> + if (!edev) {
>> >> + pr_warn("%s: Cannot find %llx:%02x:%02x.%01x\n",
>> >> + __func__, addr.buid,
>> >> + (addr.config_addr >> 8) & 0xFF,
>> >> + PCI_SLOT(addr.config_addr & 0xFF),
>> >> + PCI_FUNC(addr.config_addr & 0xFF));
>> >> + ret = 7;
>> >> + goto out;
>> >> + }
>> >> + phb = edev->phb->private_data;
>> >> +
>> >> + /* EEH enabled ? */
>> >> + if (!(phb->flags & PNV_PHB_FLAG_EEH)) {
>> >> + pr_warn("%s: EEH disabled on PHB#%d\n",
>> >> + __func__, phb->hose->global_number);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /* EEH device passed ? */
>> >> + if (!eeh_dev_passed(edev)) {
>> >> + pr_warn("%s: EEH dev %llx:%02x:%02x.%01x owned by host\n",
>> >> + __func__, addr.buid,
>> >> + (addr.config_addr >> 8) & 0xFF,
>> >> + PCI_SLOT(addr.config_addr & 0xFF),
>> >> + PCI_FUNC(addr.config_addr & 0xFF));
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /*
>> >> + * Fill result according to opcode. We don't differentiate
>> >> + * PCI bus and device sensitive PE here.
>> >> + */
>> >> + if (opcode == 0)
>> >> + info->addr.ret = edev->pe->guest_addr.pe_addr;
>> >> + else
>> >> + info->addr.ret = 1;
>> >> +out:
>> >> + return ret;
>> >> +}
>> >> +
>> >> +static int powernv_eeh_vfio_get_state(struct vfio_eeh_info *info)
>> >> +{
>> >> + struct pnv_phb *phb;
>> >> + struct eeh_pe *pe;
>> >> + struct eeh_vfio_pci_addr addr;
>> >> + int result, ret = 0;
>> >> +
>> >> + /* Locate the PE */
>> >> + addr.buid = info->state.buid;
>> >> + addr.pe_addr = info->state.pe_addr;
>> >> + pe = eeh_vfio_pe_get(&addr);
>> >> + if (!pe) {
>> >> + pr_warn("%s: Cannot locate %llx:%x\n",
>> >> + __func__, addr.buid, addr.pe_addr);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> + phb = pe->phb->private_data;
>> >> +
>> >> + /* EEH enabled ? */
>> >> + if (!(phb->flags & PNV_PHB_FLAG_EEH)) {
>> >> + pr_warn("%s: EEH disabled on PHB#%d\n",
>> >> + __func__, phb->hose->global_number);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /* Call to the IOC dependent function */
>> >> + if (phb->eeh_ops && phb->eeh_ops->get_state) {
>> >> + result = phb->eeh_ops->get_state(pe);
>> >> +
>> >> + if (!(result & EEH_STATE_RESET_ACTIVE) &&
>> >> + (result & EEH_STATE_DMA_ENABLED) &&
>> >> + (result & EEH_STATE_MMIO_ENABLED))
>> >> + info->state.state = 0;
>> >> + else if (result & EEH_STATE_RESET_ACTIVE)
>> >> + info->state.state = 1;
>> >> + else if (!(result & EEH_STATE_RESET_ACTIVE) &&
>> >> + !(result & EEH_STATE_DMA_ENABLED) &&
>> >> + !(result & EEH_STATE_MMIO_ENABLED))
>> >> + info->state.state = 2;
>> >> + else if (!(result & EEH_STATE_RESET_ACTIVE) &&
>> >> + (result & EEH_STATE_DMA_ENABLED) &&
>> >> + !(result & EEH_STATE_MMIO_ENABLED))
>> >> + info->state.state = 4;
>> >> + else
>> >> + info->state.state = 5;
>> >> +
>> >> + ret = 0;
>> >> + } else {
>> >> + pr_warn("%s: Unsupported request\n", __func__);
>> >> + ret = 3;
>> >> + }
>> >> +
>> >> +out:
>> >> + return ret;
>> >> +}
>> >> +
>> >> +static int powernv_eeh_vfio_pe_reset(struct vfio_eeh_info *info)
>> >> +{
>> >> + struct pnv_phb *phb;
>> >> + struct eeh_pe *pe;
>> >> + struct eeh_vfio_pci_addr addr;
>> >> + int opcode = info->reset.option;
>> >> + int ret = 0;
>> >> +
>> >> + /* Check opcode */
>> >> + if (opcode != EEH_RESET_DEACTIVATE &&
>> >> + opcode != EEH_RESET_HOT &&
>> >> + opcode != EEH_RESET_FUNDAMENTAL) {
>> >> + pr_warn("%s: Unsupported opcode %d\n",
>> >> + __func__, opcode);
>> >
>> >Console warnings are exploitable DoS attacks.
>> >
>>
>> Yep. I'll change all pr_warn() to pr_debug() in next revision.
>>
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /* Locate the PE */
>> >> + addr.buid = info->reset.buid;
>> >> + addr.pe_addr = info->reset.pe_addr;
>> >> + pe = eeh_vfio_pe_get(&addr);
>> >> + if (!pe) {
>> >> + pr_warn("%s: Cannot locate %llx:%x\n",
>> >> + __func__, addr.buid, addr.pe_addr);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> + phb = pe->phb->private_data;
>> >> +
>> >> + /* EEH enabled ? */
>> >> + if (!(phb->flags & PNV_PHB_FLAG_EEH)) {
>> >> + pr_warn("%s: EEH disabled on PHB#%d\n",
>> >> + __func__, phb->hose->global_number);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /* Call into the IODA dependent backend to do the reset */
>> >> + if (!phb->eeh_ops ||
>> >> + !phb->eeh_ops->set_option ||
>> >> + !phb->eeh_ops->reset) {
>> >> + pr_warn("%s: Unsupported request\n",
>> >> + __func__);
>> >> + ret = 7;
>> >> + } else {
>> >> + /*
>> >> + * The frozen PE might be caused by the mechanism called
>> >> + * PAPR error injection, which is supposed to be one-shot
>> >> + * without "sticky" bit as being stated by the spec. But
>> >> + * the reality isn't that, at least on P7IOC. So we have
>> >> + * to clear that to avoid recrusive error, which fails the
>> >> + * recovery eventually.
>> >> + */
>> >> + if (opcode == EEH_RESET_DEACTIVATE)
>> >> + opal_pci_reset(phb->opal_id,
>> >> + OPAL_PHB_ERROR,
>> >> + OPAL_ASSERT_RESET);
>> >> +
>> >> + if (phb->eeh_ops->reset(pe, opcode)) {
>> >> + pr_warn("%s: Failure from backend\n", __func__);
>> >> + ret = 1;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /*
>> >> + * The PE is still in frozen state and we need clear that.
>> >> + * It's good to clear frozen state after deassert to avoid
>> >> + * messy IO access during reset, which might cause recrusive
>> >> + * frozen PE.
>> >> + */
>> >> + if (opcode == EEH_RESET_DEACTIVATE) {
>> >> + if (phb->eeh_ops->set_option(pe, EEH_OPT_THAW_MMIO) ||
>> >> + phb->eeh_ops->set_option(pe, EEH_OPT_THAW_DMA)) {
>> >> + pr_warn("%s: Cannot clear frozen state\n",
>> >> + __func__);
>> >> + ret = 1;
>> >> + }
>> >> +
>> >> + eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
>> >> + }
>> >> + }
>> >> +
>> >> +out:
>> >> + return ret;
>> >> +}
>> >> +
>> >> +static int powernv_eeh_vfio_pe_config(struct vfio_eeh_info *info)
>> >> +{
>> >> + struct pnv_phb *phb;
>> >> + struct eeh_pe *pe;
>> >> + struct eeh_vfio_pci_addr addr;
>> >> + int ret = 0;
>> >> +
>> >> + /* Locate the PE */
>> >> + addr.buid = info->config.buid;
>> >> + addr.pe_addr = info->config.pe_addr;
>> >> + pe = eeh_vfio_pe_get(&addr);
>> >> + if (!pe) {
>> >> + pr_warn("%s: Cannot locate %llx:%x\n",
>> >> + __func__, addr.buid, addr.pe_addr);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> + phb = pe->phb->private_data;
>> >> +
>> >> + /* EEH enabled ? */
>> >> + if (!(phb->flags & PNV_PHB_FLAG_EEH)) {
>> >> + pr_warn("%s: EEH disabled on PHB#%d\n",
>> >> + __func__, phb->hose->global_number);
>> >> + ret = 3;
>> >> + goto out;
>> >> + }
>> >> +
>> >> + /*
>> >> + * The access to PCI config space on VFIO device has some
>> >> + * limitations. Part of PCI config space, including BAR
>> >> + * registers are not readable and writable. So the guest
>> >> + * should have stale values for those registers and we have
>> >> + * to restore them in host side.
>> >> + */
>> >> + eeh_pe_restore_bars(pe);
>> >> +out:
>> >> + return ret;
>> >> +}
>> >> +
>> >> +void eeh_vfio_release(struct iommu_table *tbl)
>> >> +{
>> >> + struct pnv_ioda_pe *pnv_pe = container_of(tbl, struct pnv_ioda_pe,
>> >> + tce32_table);
>> >> + struct pnv_phb *phb = pnv_pe->phb;
>> >> + struct eeh_pe *phb_pe, *pe;
>> >> + struct eeh_dev dev, *edev, *tmp;
>> >> +
>> >> + /* Find PHB PE */
>> >> + phb_pe = eeh_phb_pe_get(phb->hose);
>> >> + if (unlikely(!phb_pe)) {
>> >> + pr_warn("%s: Cannot find PHB#%d PE\n",
>> >> + __func__, phb->hose->global_number);
>> >> + return;
>> >> + }
>> >> +
>> >> + /* Find PE */
>> >> + memset(&dev, 0, sizeof(struct eeh_dev));
>> >> + dev.phb = phb->hose;
>> >> + dev.pe_config_addr = pnv_pe->pe_number;
>> >> + pe = eeh_pe_get(&dev);
>> >> + if (unlikely(!pe)) {
>> >> + pr_warn("%s: Cannot find PE instance for PHB#%d-PE#%d\n",
>> >> + __func__, phb->hose->global_number,
>> >> + pnv_pe->pe_number);
>> >> + return;
>> >> + }
>> >> +
>> >> + /* Release it to host */
>> >> + if (!eeh_pe_passed(pe))
>> >> + return;
>> >> +
>> >> + eeh_pe_for_each_dev(pe, edev, tmp) {
>> >> + if (!eeh_dev_passed(edev))
>> >> + continue;
>> >> +
>> >> + memset(&edev->guest_addr, 0, sizeof(edev->guest_addr));
>> >
>> >Is guest_addr = { 0 } not valid? As agraf already mentioned, there are
>> >a number of issues with using a guest_address for a token.
>> >
>>
>> For now, PHB BUID can't be "0". Originally, I was planing to have some code
>> in QEMU to have unique PHB BUID across the system so that guest_address could
>> be the unique token. But I'm going to remove the address mapping in next
>> revision
>> as Alex.G suggested.
>>
>> >> + eeh_dev_set_passed(edev, false);
>> >> + }
>> >> +
>> >> + memset(&pe->guest_addr, 0, sizeof(pe->guest_addr));
>> >> + eeh_pe_set_passed(pe, false);
>> >> +}
>> >> +EXPORT_SYMBOL(eeh_vfio_release);
>> >> +
>> >> +int eeh_vfio_ioctl(unsigned long arg)
>> >> +{
>> >> + struct vfio_eeh_info info;
>> >> + int ret = -EINVAL;
>> >> +
>> >> + /* Copy over user argument */
>> >> + if (copy_from_user(&info, (void __user *)arg, sizeof(info))) {
>> >> + pr_warn("%s: Cannot copy user argument 0x%lx\n",
>> >> + __func__, arg);
>> >> + return -EFAULT;
>> >> + }
>> >> +
>> >> + /* Sanity check */
>> >> + if (info.argsz != sizeof(info)) {
>> >
>> >This breaks compatibility if you need to later add a new ops with a
>> >larger footprint.
>> >
>>
>> Ok. I'll fix it in next revision. Thanks for pointing it out.
>>
>> >> + pr_warn("%s: Invalid argument size (%d, %ld)\n",
>> >> + __func__, info.argsz, sizeof(info));
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> + /* Route according to operation */
>> >> + switch (info.op) {
>> >> + case VFIO_EEH_OP_MAP:
>> >> + ret = powernv_eeh_vfio_map(&info);
>> >> + break;
>> >> + case VFIO_EEH_OP_UNMAP:
>> >> + ret = powernv_eeh_vfio_unmap(&info);
>> >> + break;
>> >> + case VFIO_EEH_OP_SET_OPTION:
>> >> + ret = powernv_eeh_vfio_set_option(&info);
>> >> + break;
>> >> + case VFIO_EEH_OP_GET_ADDR:
>> >> + ret = powernv_eeh_vfio_get_addr(&info);
>> >> + break;
>> >> + case VFIO_EEH_OP_GET_STATE:
>> >> + ret = powernv_eeh_vfio_get_state(&info);
>> >> + break;
>> >> + case VFIO_EEH_OP_PE_RESET:
>> >> + ret = powernv_eeh_vfio_pe_reset(&info);
>> >> + break;
>> >> + case VFIO_EEH_OP_PE_CONFIG:
>> >> + ret = powernv_eeh_vfio_pe_config(&info);
>> >> + break;
>> >> + default:
>> >> + pr_info("%s: Cannot handle op#%d\n",
>> >> + __func__, info.op);
>> >> + }
>> >> +
>> >> + /* Copy data back */
>> >> + if (!ret && copy_to_user((void __user *)arg, &info, sizeof(info))) {
>> >> + pr_warn("%s: Cannot copy to user 0x%lx\n",
>> >> + __func__, arg);
>> >> + return -EFAULT;
>> >> + }
>> >> +
>> >> + return ret;
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(eeh_vfio_ioctl);
>> >> diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c
>> >> b/drivers/vfio/vfio_iommu_spapr_tce.c
>> >> index a84788b..c45dece 100644
>> >> --- a/drivers/vfio/vfio_iommu_spapr_tce.c
>> >> +++ b/drivers/vfio/vfio_iommu_spapr_tce.c
>> >> @@ -26,6 +26,11 @@
>> >> #define DRIVER_AUTHOR "a...@ozlabs.ru"
>> >> #define DRIVER_DESC "VFIO IOMMU SPAPR TCE"
>> >>
>> >> +#ifdef CONFIG_VFIO_EEH
>> >> +extern void eeh_vfio_release(struct iommu_table *tbl);
>> >> +extern int eeh_vfio_ioctl(unsigned long arg);
>> >> +#endif
>> >> +
>> >> static void tce_iommu_detach_group(void *iommu_data,
>> >> struct iommu_group *iommu_group);
>> >>
>> >> @@ -283,6 +288,10 @@ static long tce_iommu_ioctl(void *iommu_data,
>> >> tce_iommu_disable(container);
>> >> mutex_unlock(&container->lock);
>> >> return 0;
>> >> +#ifdef CONFIG_VFIO_EEH
>> >
>> >I'm not a fan of all these #ifdefs, hide it in eeh_vfio_ioctl() and
>> >eeh_vfio_release() if needed.
>> >
>>
>> Ok. Will do it in next revision.
>>
>> >> + case VFIO_EEH_INFO:
>> >> + return eeh_vfio_ioctl(arg);
>> >> +#endif
>> >> }
>> >>
>> >> return -ENOTTY;
>> >> @@ -342,6 +351,9 @@ static void tce_iommu_detach_group(void *iommu_data,
>> >> /* pr_debug("tce_vfio: detaching group #%u from iommu %p\n",
>> >> iommu_group_id(iommu_group), iommu_group); */
>> >> container->tbl = NULL;
>> >> +#ifdef CONFIG_VFIO_EEH
>> >> + eeh_vfio_release(tbl);
>> >> +#endif
>> >> iommu_release_ownership(tbl);
>> >> }
>> >> mutex_unlock(&container->lock);
>> >> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
>> >> index cb9023d..1fd1bfb 100644
>> >> --- a/include/uapi/linux/vfio.h
>> >> +++ b/include/uapi/linux/vfio.h
>> >> @@ -455,6 +455,63 @@ struct vfio_iommu_spapr_tce_info {
>> >>
>> >> #define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
>> >>
>> >> +/*
>> >> + * The VFIO EEH info struct provides way to support EEH functionality
>> >> + * for PCI device that is passed from host to guest via VFIO.
>> >> + */
>> >> +#define VFIO_EEH_OP_MAP 0
>> >> +#define VFIO_EEH_OP_UNMAP 1
>> >> +#define VFIO_EEH_OP_SET_OPTION 2
>> >> +#define VFIO_EEH_OP_GET_ADDR 3
>> >> +#define VFIO_EEH_OP_GET_STATE 4
>> >> +#define VFIO_EEH_OP_PE_RESET 5
>> >> +#define VFIO_EEH_OP_PE_CONFIG 6
>> >
>> >Is this really an "info" ioctl?
>> >
>>
>> Yeah, "VFIO_EEH_INFO" isn't a good name. How about to have
>> "VFIO_EEH_HANDLER" ?
>
>VFIO_EEH_OP perhaps. Thanks,
>
Ok. Will rename it to VFIO_EEH_OP in next revision.
>Alex
>
>> >> +
>> >> +struct vfio_eeh_info {
>> >> + __u32 argsz;
>> >> + __u32 op;
>> >> +
>> >> + union {
>> >> + struct vfio_eeh_map {
>> >> + __u32 host_domain;
>> >> + __u16 host_cfg_addr;
>> >> + __u64 guest_buid;
>> >> + __u16 guest_cfg_addr;
>> >> + } map;
>> >> + struct vfio_eeh_unmap {
>> >> + __u64 buid;
>> >> + __u16 cfg_addr;
>> >> + } unmap;
>> >> + struct vfio_eeh_set_option {
>> >> + __u64 buid;
>> >> + __u32 addr;
>> >> + __u32 option;
>> >> + } option;
>> >> + struct vfio_eeh_pe_addr {
>> >> + __u64 buid;
>> >> + __u32 cfg_addr;
>> >> + __u32 option;
>> >> + __u32 ret;
>> >> + } addr;
>> >> + struct vfio_eeh_state {
>> >> + __u64 buid;
>> >> + __u32 pe_addr;
>> >> + __u32 state;
>> >> + } state;
>> >> + struct vfio_eeh_reset {
>> >> + __u64 buid;
>> >> + __u32 pe_addr;
>> >> + __u32 option;
>> >> + } reset;
>> >> + struct vfio_eeh_config {
>> >> + __u64 buid;
>> >> + __u32 pe_addr;
>> >> + } config;
>> >> + };
>> >> +};
>> >> +
>> >> +#define VFIO_EEH_INFO _IO(VFIO_TYPE, VFIO_BASE + 21)
>> >> +
>> >> /* ***************************************************************** */
>> >>
>> >> #endif /* _UAPIVFIO_H */
>>
Thanks,
Gavin
>
--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
