On Tue, Oct 14, 2008 at 12:18:40PM +0800, Dong, Eddie wrote: > Matthew Wilcox wrote: > > On Tue, Oct 14, 2008 at 10:14:35AM +0800, Yu Zhao wrote: > >> As Eddie said, we have two problems here: > >> 1) User has to set device specific parameters of a VF > >> when he wants to use this VF with KVM (assign this > >> device to KVM guest). In this case, > >> VF driver is not loaded in the host environment. So > >> operations which > >> are implemented as driver callback (e.g. > >> set_mac_address()) are not supported. > > > > I suspect what you want to do is create, then configure > > the device in the host, then assign it to the guest. > > That is not true. Rememver the created VFs will be destroyed no matter > for PF power event or error recovery conducted reset. > So what we want is: > > Config, create, assign, and then deassign and destroy and then > recreate...
Yes, but my point is this all happens in the _host_, not in the _guest_. > Sorry can u explain a little bit more? The SR-IOV patch won't define > what kind of entries should be created or not, we leave network > subsystem to decide what to do. Same for disk subsstem etc. No entries should be created. This needs to be not SR-IOV specific. -- Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step." -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
