On 11/14/2014 08:45 AM, Marc Zyngier wrote:
> Hi Mario,
> 
> On 14/11/14 01:57, Mario Smarduch wrote:
>> This patch adds support for handling 2nd stage page faults during migration,
>> it disables faulting in huge pages, and dissolves huge pages to page tables.
>> In case migration is canceled huge pages are used again.
>>
>> Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>
>> Signed-off-by: Mario Smarduch <m.smard...@samsung.com>
>> ---
>>  arch/arm/kvm/mmu.c |   56 
>> ++++++++++++++++++++++++++++++++++++++++++++--------
>>  1 file changed, 48 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
>> index 8137455..ff88e5b 100644
>> --- a/arch/arm/kvm/mmu.c
>> +++ b/arch/arm/kvm/mmu.c
>> @@ -47,6 +47,20 @@ static phys_addr_t hyp_idmap_vector;
>>  #define kvm_pmd_huge(_x)    (pmd_huge(_x) || pmd_trans_huge(_x))
>>  #define kvm_pud_huge(_x)    pud_huge(_x)
>>  
>> +#define IOMAP_ATTR          0x1
>> +#define LOGGING_ACTIVE              0x2
>> +#define SET_SPTE_FLAGS(l, i)        ((l) << (LOGGING_ACTIVE - 1) | \
>> +                             (i) << (IOMAP_ATTR - 1))
> 
> I suffered a minor brain haemorrhage on this one. How about something
> that is more in line with what's done almost everywhere else:

Hope it wasn't that serious, a huge blow to the project and jazz :)

I tried to optimize a little, but I see your point I'll resend
this one thanks for the tag.

(Btw email server issues hopefully this is the only response)

- Mario
> 
> #define KVM_S2PTE_FLAG_IS_IOMAP               (1UL << 0)
> #define KVM_S2PTE_FLAG_LOGGING_ACTIVE (1UL << 1)
> 
>> +static bool kvm_get_logging_state(struct kvm_memory_slot *memslot)
>> +{
>> +#ifdef CONFIG_ARM
>> +    return !!memslot->dirty_bitmap;
>> +#else
>> +    return false;
>> +#endif
>> +}
>> +
>>  static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
>>  {
>>      /*
>> @@ -626,10 +640,13 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct 
>> kvm_mmu_memory_cache
>>  }
>>  
>>  static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache 
>> *cache,
>> -                      phys_addr_t addr, const pte_t *new_pte, bool iomap)
>> +                      phys_addr_t addr, const pte_t *new_pte,
>> +                      unsigned long flags)
>>  {
>>      pmd_t *pmd;
>>      pte_t *pte, old_pte;
>> +    bool iomap = flags & IOMAP_ATTR;
>> +    bool logging_active = flags & LOGGING_ACTIVE;
> 
> If you convert these two variables to be 'unsigned long'...
> 
>>  
>>      /* Create stage-2 page table mapping - Level 1 */
>>      pmd = stage2_get_pmd(kvm, cache, addr);
>> @@ -641,6 +658,18 @@ static int stage2_set_pte(struct kvm *kvm, struct 
>> kvm_mmu_memory_cache *cache,
>>              return 0;
>>      }
>>  
>> +    /*
>> +     * While dirty memory logging, clear PMD entry for huge page and split
>> +     * into smaller pages, to track dirty memory at page granularity.
>> +     */
>> +    if (logging_active && kvm_pmd_huge(*pmd)) {
>> +            phys_addr_t ipa = pmd_pfn(*pmd) << PAGE_SHIFT;
>> +
>> +            pmd_clear(pmd);
>> +            kvm_tlb_flush_vmid_ipa(kvm, ipa);
>> +            put_page(virt_to_page(pmd));
>> +    }
>> +
>>      /* Create stage-2 page mappings - Level 2 */
>>      if (pmd_none(*pmd)) {
>>              if (!cache)
>> @@ -693,7 +722,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t 
>> guest_ipa,
>>              if (ret)
>>                      goto out;
>>              spin_lock(&kvm->mmu_lock);
>> -            ret = stage2_set_pte(kvm, &cache, addr, &pte, true);
>> +            ret = stage2_set_pte(kvm, &cache, addr, &pte, IOMAP_ATTR);
>>              spin_unlock(&kvm->mmu_lock);
>>              if (ret)
>>                      goto out;
>> @@ -908,6 +937,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, 
>> phys_addr_t fault_ipa,
>>      struct vm_area_struct *vma;
>>      pfn_t pfn;
>>      pgprot_t mem_type = PAGE_S2;
>> +    bool logging_active = kvm_get_logging_state(memslot);
> 
> and this to be:
>       unsigned long logging_active = 0;
>       if (kvm_get_logging_state(memslot))
>               logging_active = KVM_S2PTE_FLAG_LOGGING_ACTIVE;
> 
>>  
>>      write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu));
>>      if (fault_status == FSC_PERM && !write_fault) {
>> @@ -918,7 +948,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, 
>> phys_addr_t fault_ipa,
>>      /* Let's check if we will get back a huge page backed by hugetlbfs */
>>      down_read(&current->mm->mmap_sem);
>>      vma = find_vma_intersection(current->mm, hva, hva + 1);
>> -    if (is_vm_hugetlb_page(vma)) {
>> +    if (is_vm_hugetlb_page(vma) && !logging_active) {
>>              hugetlb = true;
>>              gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT;
>>      } else {
>> @@ -964,7 +994,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, 
>> phys_addr_t fault_ipa,
>>      spin_lock(&kvm->mmu_lock);
>>      if (mmu_notifier_retry(kvm, mmu_seq))
>>              goto out_unlock;
>> -    if (!hugetlb && !force_pte)
>> +    if (!hugetlb && !force_pte && !logging_active)
>>              hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
>>  
>>      if (hugetlb) {
>> @@ -978,16 +1008,18 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, 
>> phys_addr_t fault_ipa,
>>              ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd);
>>      } else {
>>              pte_t new_pte = pfn_pte(pfn, mem_type);
>> +            unsigned long flags = SET_SPTE_FLAGS(logging_active,
>> +                            mem_type == PAGE_S2_DEVICE);
> 
> ... you can convert this to:
> 
>               unsigned long flags = logging_active;
>               if (mem_type == PAGE_S2_DEVICE)
>                       flags |= KVM_S2PTE_FLAG_IS_IOMAP;
> 
> Yes, this is more verbose, but I can decipher it without any effort.
> Call me lazy! ;-)
> 
>>              if (writable) {
>>                      kvm_set_s2pte_writable(&new_pte);
>>                      kvm_set_pfn_dirty(pfn);
>>              }
>>              coherent_cache_guest_page(vcpu, hva, PAGE_SIZE);
>> -            ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte,
>> -                                 mem_type == PAGE_S2_DEVICE);
>> +            ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, flags);
>>      }
>>  
>> -
>> +    if (write_fault)
>> +            mark_page_dirty(kvm, gfn);
>>  out_unlock:
>>      spin_unlock(&kvm->mmu_lock);
>>      kvm_release_pfn_clean(pfn);
>> @@ -1137,7 +1169,15 @@ static void kvm_set_spte_handler(struct kvm *kvm, 
>> gpa_t gpa, void *data)
>>  {
>>      pte_t *pte = (pte_t *)data;
>>  
>> -    stage2_set_pte(kvm, NULL, gpa, pte, false);
>> +    /*
>> +     * We can always call stage2_set_pte with logging_active == false,
>> +     * because MMU notifiers will have unmapped a huge PMD before calling
>> +     * ->change_pte() (which in turn calls kvm_set_spte_hva()) and therefore
>> +     * stage2_set_pte() never needs to clear out a huge PMD through this
>> +     * calling path.
>> +     */
>> +
>> +    stage2_set_pte(kvm, NULL, gpa, pte, 0);
>>  }
> 
> 
> Other than this:
> 
> Reviewed-by: Marc Zyngier <marc.zyng...@arm.com>
> 
> Thanks,
> 
>       M.
> 

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to