On Wed, Jul 15, 2009 at 03:18:00PM -0300, Marcelo Tosatti wrote:
> On Tue, Jul 14, 2009 at 05:30:45PM +0300, Gleb Natapov wrote:
> > Use gsi indexed array instead of scanning all entries on each interrupt
> > injection. Also maintain back mapping from irqchip/pin to gsi to speedup
> > interrupt acknowledgment notifications.
> >
> > Signed-off-by: Gleb Natapov <[email protected]>
> > ---
> > include/linux/kvm_host.h | 11 ++++++-
> > virt/kvm/irq_comm.c | 62
> > ++++++++++++++++++++++++++++-----------------
> > 2 files changed, 47 insertions(+), 26 deletions(-)
> >
> > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> > index aa64d0d..ae6cbf1 100644
> > --- a/include/linux/kvm_host.h
> > +++ b/include/linux/kvm_host.h
> > @@ -128,7 +128,14 @@ struct kvm_kernel_irq_routing_entry {
> > } irqchip;
> > struct msi_msg msi;
> > };
> > - struct list_head link;
> > + struct hlist_node link;
> > +};
> > +
> > +struct kvm_irq_routing_table {
> > + int chip[3][KVM_IOAPIC_NUM_PINS];
> > + struct kvm_kernel_irq_routing_entry *rt_entries;
> > + u32 max_gsi;
> > + struct hlist_head map[0];
> > };
> >
> > struct kvm {
> > @@ -165,7 +172,7 @@ struct kvm {
> > #endif
> >
> > #ifdef CONFIG_HAVE_KVM_IRQCHIP
> > - struct kvm_kernel_irq_routing_entry *irq_routing;
> > + struct kvm_irq_routing_table *irq_routing;
> > spinlock_t irq_routing_lock;
> > struct hlist_head mask_notifier_list;
> > struct hlist_head irq_ack_notifier_list;
> > diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
> > index c54a28b..da643d4 100644
> > --- a/virt/kvm/irq_comm.c
> > +++ b/virt/kvm/irq_comm.c
> > @@ -125,6 +125,8 @@ int kvm_set_irq(struct kvm *kvm, int irq_source_id, int
> > irq, int level)
> > struct kvm_kernel_irq_routing_entry *e;
> > unsigned long *irq_state, sig_level;
> > int ret = -1;
> > + struct kvm_irq_routing_table *irq_rt;
> > + struct hlist_node *n;
> >
> > trace_kvm_set_irq(irq, level, irq_source_id);
> >
> > @@ -147,14 +149,13 @@ int kvm_set_irq(struct kvm *kvm, int irq_source_id,
> > int irq, int level)
> > * writes to the unused one.
> > */
> > rcu_read_lock();
> > - for (e = rcu_dereference(kvm->irq_routing); e && e->set; e++) {
> > - if (e->gsi == irq) {
> > - int r = e->set(e, kvm, sig_level);
> > - if (r < 0)
> > - continue;
> > + irq_rt = rcu_dereference(kvm->irq_routing);
> > + hlist_for_each_entry(e, n, &irq_rt->map[irq], link) {
> > + int r = e->set(e, kvm, sig_level);
> > + if (r < 0)
> > + continue;
> >
> > - ret = r + ((ret < 0) ? 0 : ret);
> > - }
> > + ret = r + ((ret < 0) ? 0 : ret);
> > }
> > rcu_read_unlock();
> > return ret;
> > @@ -162,21 +163,16 @@ int kvm_set_irq(struct kvm *kvm, int irq_source_id,
> > int irq, int level)
> >
> > void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin)
> > {
> > - struct kvm_kernel_irq_routing_entry *e;
> > struct kvm_irq_ack_notifier *kian;
> > struct hlist_node *n;
> > - unsigned gsi = pin;
> > + unsigned gsi;
> >
> > trace_kvm_ack_irq(irqchip, pin);
> >
> > rcu_read_lock();
> > - for (e = rcu_dereference(kvm->irq_routing); e && e->set; e++) {
> > - if (e->irqchip.irqchip == irqchip &&
> > - e->irqchip.pin == pin) {
> > - gsi = e->gsi;
> > - break;
> > - }
> > - }
> > + gsi = rcu_dereference(kvm->irq_routing)->chip[irqchip][pin];
> > + if (gsi == -1)
> > + gsi = pin;
> >
> > hlist_for_each_entry_rcu(kian, n, &kvm->irq_ack_notifier_list, link)
> > if (kian->gsi == gsi)
> > @@ -277,7 +273,8 @@ void kvm_free_irq_routing(struct kvm *kvm)
> > kfree(kvm->irq_routing);
> > }
> >
> > -static int setup_routing_entry(struct kvm_kernel_irq_routing_entry *e,
> > +static int setup_routing_entry(struct kvm_irq_routing_table *rt,
> > + struct kvm_kernel_irq_routing_entry *e,
> > const struct kvm_irq_routing_entry *ue)
> > {
> > int r = -EINVAL;
> > @@ -303,6 +300,7 @@ static int setup_routing_entry(struct
> > kvm_kernel_irq_routing_entry *e,
> > }
> > e->irqchip.irqchip = ue->u.irqchip.irqchip;
> > e->irqchip.pin = ue->u.irqchip.pin + delta;
> > + rt->chip[ue->u.irqchip.irqchip][e->irqchip.pin] = ue->gsi;
> > break;
> > case KVM_IRQ_ROUTING_MSI:
> > e->set = kvm_set_msi;
> > @@ -313,6 +311,8 @@ static int setup_routing_entry(struct
> > kvm_kernel_irq_routing_entry *e,
> > default:
> > goto out;
> > }
> > +
> > + hlist_add_head(&e->link, &rt->map[e->gsi]);
> > r = 0;
> > out:
> > return r;
> > @@ -324,23 +324,37 @@ int kvm_set_irq_routing(struct kvm *kvm,
> > unsigned nr,
> > unsigned flags)
> > {
> > - struct kvm_kernel_irq_routing_entry *new, *old;
> > - unsigned i;
> > + struct kvm_irq_routing_table *new, *old;
> > + u32 i, j, max_gsi = 0;
> > int r;
> >
> > - /* last elemet is left zeored and indicates the end of the array */
> > - new = kzalloc(sizeof(*new) * (nr + 1), GFP_KERNEL);
> > + for (i = 0; i < nr; ++i) {
> > + if (ue[i].gsi >= KVM_MAX_IRQ_ROUTES)
> > + return -EINVAL;
> > + max_gsi = max(max_gsi, ue[i].gsi);
> > + }
> > +
> > + max_gsi += 1;
> > +
> > + new = kzalloc(sizeof(*new) + (max_gsi * sizeof(struct hlist_head)) +
> > + (nr * sizeof(struct kvm_kernel_irq_routing_entry)),
> > + GFP_KERNEL);
>
> Why don't you allocate the hlist_head's and the routing entries
> separately?
>
I prefer it that way because cleanup after error is much easier. What
are the disadvantages?
> >
> > if (!new)
> > return -ENOMEM;
> >
> > + new->rt_entries = (void *)&new->map[max_gsi];
> > +
> > + new->max_gsi = max_gsi;
> > + for (i = 0; i < 3; i++)
> > + for (j = 0; j < KVM_IOAPIC_NUM_PINS; j++)
> > + new->chip[i][j] = -1;
> > +
>
> Should use something else instead of 3. Maybe dynamic for multiple
> IOAPIC's support (but you can argue thats another problem).
>
This is (another problem). The code has 1 IOAPIC hardcoded pretty deeply
even at user/kernel API level. We will solve is some day.
> > for (i = 0; i < nr; ++i) {
> > r = -EINVAL;
> > - if (ue->gsi >= KVM_MAX_IRQ_ROUTES)
> > - goto out;
> > if (ue->flags)
> > goto out;
> > - r = setup_routing_entry(new + i, ue);
> > + r = setup_routing_entry(new, &new->rt_entries[i], ue);
> > if (r)
> > goto out;
> > ++ue;
> > --
> > 1.6.2.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe kvm" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
