* Kenni Lund (ke...@kelu.dk) wrote: > 2010/1/26 Kenni Lund <ke...@kelu.dk>: > > 2010/1/26 Chris Wright <chr...@sous-sol.org>: > >> > >> Again, VT (or VT-x) isn't the same as VT-d. So to be sure, you can > >> grep dmesg for DMAR and IOMMU to verify that the chipset actually has > >> VT-d support, that it's enabled, and that it's not broken (there are > >> quite a few broken BIOS out there that case the IOMMU to be unusable). > > > > dmesg | egrep (DMAR|IOMMU) > > This information should _really_ be added to the wiki at > > http://www.linux-kvm.org/page/How_to_assign_devices_with_VT-d_in_KVM > > > > Knowing this, it's quite easy for a user to determine if his system > > has VT-d support, _before_ following the guide, compiling own kernel, > > setting up qemu-kvm, unbinding and rebinding PCI devices, just to have > > qemu-kvm 0.12.2 tell him that the system has no IOMMU (much better > > than 0.12.1, agreed, but it's a bit late in the process to find out > > :)) > > Doh, I didn't consider if the kernel compilation probably were needed > to give any output - nevertheless, I still think this should be added > to the wiki, even if it's the case. Perhaps a short text describing > what you should look for.
Sure, I added a short snippet. thanks, -chris -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
