On 06/14/2010 10:47 PM, Avi Kivity wrote:
On 06/15/2010 10:34 AM, Zachary Amsden wrote:
Some AMD based machines can have TSC drift when in C1 HLT state because
despite attempting to scale the TSC increment when dividing down the
P-state, the processor may return to full P-state to service cache
probes.  The TSC of halted CPUs can advance faster than that of running
CPUs as a result, causing unpredictable TSC drift.

We implement a recommended workaround, which is disabling C1 clock ramping.
---
arch/x86/kvm/x86.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
  1 files changed, 45 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index ef847ee..8e836e9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -56,6 +56,11 @@
  #include<asm/i387.h>
  #include<asm/xcr.h>

+#ifdef CONFIG_K8_NB
+#include<linux/pci.h>
+#include<asm/k8.h>
+#endif
+
  #define MAX_IO_MSRS 256
  #define CR0_RESERVED_BITS                        \
(~(unsigned long)(X86_CR0_PE | X86_CR0_MP | X86_CR0_EM | X86_CR0_TS \ @@ -4287,10 +4292,43 @@ static struct notifier_block kvmclock_cpu_notifier_block = {
      .priority = -INT_MAX
  };

+static u8 disabled_c1_ramp = 0;
+
  static void kvm_timer_init(void)
  {
      int cpu;

+    /*
+ * AMD processors can de-synchronize TSC on halt in C1 state, because
+     * processors in lower P state will have TSC scaled properly during
+     * normal operation, but will have TSC scaled improperly while
+ * servicing cache probes. Because there is no way to determine how
+     * TSC was adjusted during cache probes, there are two solutions:
+     * resynchronize after halt, or disable C1-clock ramping.
+     *
+     * We implemenent solution 2.
+     */
+#ifdef CONFIG_K8_NB
+    if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD&&
+        boot_cpu_data.x86 == 0x0f&&
+        !boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
+        struct pci_dev *nb;
+        int i;
+        cache_k8_northbridges();
+        for (i = 0; i<  num_k8_northbridges; i++) {
+            u8 byte;
+            nb = k8_northbridges[i];
+            pci_read_config_byte(nb, 0x87,&byte);
+            if (byte&  1) {
+ printk(KERN_INFO "%s: AMD C1 clock ramping detected, performing workaround\n", __func__);
+                disabled_c1_ramp = byte;
+                pci_write_config_byte(nb, 0x87, byte&  0xFC);
+
+            }
+        }
+    }
+#endif
+
      register_hotcpu_notifier(&kvmclock_cpu_notifier_block);
      if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
          cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
@@ -4402,6 +4440,13 @@ void kvm_arch_exit(void)
      unregister_hotcpu_notifier(&kvmclock_cpu_notifier_block);
      kvm_x86_ops = NULL;
      kvm_mmu_module_exit();
+#ifdef CONFIG_K8_NB
+    if (disabled_c1_ramp) {
+        struct pci_dev **nb;
+        for (nb = k8_northbridges; *nb; nb++)
+            pci_write_config_byte(*nb, 0x87, disabled_c1_ramp);
+    }
+#endif
  }

Such platform hackery should be in the platform code, not in kvm. kvm might request to enable it (why not enable it unconditionally? should we disable it on hardware_disable()?

I actually have some negative effects to report from this patch - when under stress, my laptop spontaneously shut down. Thermal problems?

I agree it is complete hackery. I do not recommend this patch for upstream inclusion unless it is proposed also by someone more familiar with the hardware.

However, it was required for my testing.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to