On Mon, Jun 14, 2010 at 09:34:13PM -1000, Zachary Amsden wrote:
> Kernel time, which advances in discrete steps may progress much slower
> than TSC.  As a result, when kvmclock is adjusted to a new base, the
> apparent time to the guest, which runs at a much higher, nsec scaled
> rate based on the current TSC, may have already been observed to have
> a larger value (kernel_ns + scaled tsc) than the value to which we are
> setting it (kernel_ns + 0).
> 
> We must instead compute the clock as potentially observed by the guest
> for kernel_ns to make sure it does not go backwards.
> 
> Signed-off-by: Zachary Amsden <zams...@redhat.com>
> ---
>  arch/x86/include/asm/kvm_host.h |    4 ++
>  arch/x86/kvm/x86.c              |   79 
> +++++++++++++++++++++++++++++++++------
>  2 files changed, 71 insertions(+), 12 deletions(-)
> 

> +     /*
> +      * The protection we require is simple: we must not be preempted from
> +      * the CPU between our read of the TSC khz and our read of the TSC.
> +      * Interrupt protection is not strictly required, but it does result in
> +      * greater accuracy for the TSC / kernel_ns measurement.
> +      */
> +     local_irq_save(flags);
> +     this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
> +     kvm_get_msr(v, MSR_IA32_TSC, &tsc_timestamp);
> +     ktime_get_ts(&ts);
> +     monotonic_to_bootbased(&ts);
> +     kernel_ns = timespec_to_ns(&ts);
> +     local_irq_restore(flags);
> +
>       if (unlikely(this_tsc_khz == 0)) {
>               kvm_request_guest_time_update(v);
>               return 1;
>       }
>  
> +     /*
> +      * Time as measured by the TSC may go backwards when resetting the base
> +      * tsc_timestamp.  The reason for this is that the TSC resolution is
> +      * higher than the resolution of the other clock scales.  Thus, many
> +      * possible measurments of the TSC correspond to one measurement of any
> +      * other clock, and so a spread of values is possible.  This is not a
> +      * problem for the computation of the nanosecond clock; with TSC rates
> +      * around 1GHZ, there can only be a few cycles which correspond to one
> +      * nanosecond value, and any path through this code will inevitably
> +      * take longer than that.  However, with the kernel_ns value itself,
> +      * the precision may be much lower, down to HZ granularity.  If the
> +      * first sampling of TSC against kernel_ns ends in the low part of the
> +      * range, and the second in the high end of the range, we can get:
> +      *
> +      * (TSC - offset_low) * S + kns_old > (TSC - offset_high) * S + kns_new
> +      *
> +      * As the sampling errors potentially range in the thousands of cycles,
> +      * it is possible such a time value has already been observed by the
> +      * guest.  To protect against this, we must compute the system time as
> +      * observed by the guest and ensure the new system time is greater.
> +      */
> +     max_kernel_ns = 0;
> +     if (vcpu->hv_clock.tsc_timestamp) {
> +             max_kernel_ns = vcpu->last_guest_tsc -
> +                             vcpu->hv_clock.tsc_timestamp;
> +             max_kernel_ns = pvclock_scale_delta(max_kernel_ns,
> +                                 vcpu->hv_clock.tsc_to_system_mul,
> +                                 vcpu->hv_clock.tsc_shift);
> +             max_kernel_ns += vcpu->last_kernel_ns;
> +     }
> +
>       if (unlikely(vcpu->hw_tsc_khz != this_tsc_khz)) {
> -             kvm_set_time_scale(this_tsc_khz, &vcpu->hv_clock);
> +             kvm_get_time_scale(NSEC_PER_SEC / 1000, this_tsc_khz,
> +                                &vcpu->hv_clock.tsc_shift,
> +                                &vcpu->hv_clock.tsc_to_system_mul);
>               vcpu->hw_tsc_khz = this_tsc_khz;
>       }
>  
> -     /* Keep irq disabled to prevent changes to the clock */
> -     local_irq_save(flags);
> -     kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
> -     ktime_get_ts(&ts);
> -     monotonic_to_bootbased(&ts);
> -     local_irq_restore(flags);
> +     if (max_kernel_ns > kernel_ns) {
> +             s64 overshoot = max_kernel_ns - kernel_ns;
> +             ++v->stat.tsc_ahead;
> +             if (overshoot > NSEC_PER_SEC / HZ) {
> +                     ++v->stat.tsc_overshoot;
> +                     if (printk_ratelimit())
> +                             pr_debug("ns overshoot: %lld\n", overshoot);
> +             }
> +             kernel_ns = max_kernel_ns;
> +     }
>  
>       /* With all the info we got, fill in the values */
> -
> -     vcpu->hv_clock.system_time = ts.tv_nsec +
> -                                  (NSEC_PER_SEC * (u64)ts.tv_sec) + 
> v->kvm->arch.kvmclock_offset;
> +     vcpu->hv_clock.tsc_timestamp = tsc_timestamp;
> +     vcpu->hv_clock.system_time = kernel_ns + v->kvm->arch.kvmclock_offset;
> +     vcpu->last_kernel_ns = kernel_ns;
>  
>       vcpu->hv_clock.flags = 0;
>  
> @@ -4836,6 +4889,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
>       if (hw_breakpoint_active())
>               hw_breakpoint_restore();
>  
> +     kvm_get_msr(vcpu, MSR_IA32_TSC, &vcpu->arch.last_guest_tsc);
> +
>       atomic_set(&vcpu->guest_mode, 0);
>       smp_wmb();
>       local_irq_enable();

Is this still needed with the guest side global counter fix?
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to