Hi, As already posted, I experience disk I/O stucks with KVM, which make the guest systems alsmost unusable. These stucks come periodically, e.g. every 2 to 10 seconds and last between 3 and sometimes over 120 seconds, which trigger kernel messages like this:
INFO: task postgres:2195 blocked for more than 120 seconds If the stucks are shorter, no error messages can be seen in any log file (neither on host, nor on guest). On the other hand sometimes the system may remain responsive for e.g. half an hour, then the stucks come back. I have the following configuration: Host: Debian Lenny, Kernel 2.6.32-bpo and/or 2.6.36, qemu-kvm 0.12.5 The host has 6 SATA-disks, whereas Devices: md0/1/2, sda/sdc = WD Raptor Devices md3: sdb/sdd WD Caviar Green Devices md4: sde/sdf WD Caviar Green On top of the md-devices I have LVM volumes. The mainboard is an Asus Z8NR-D12 with 2 Xeon L5520 processors and 16 GB RAM. The chipset is a i5500/ICH10R. Currently I have the following 2 guests: 1) "vmUranos": Debian Lenny, Kernel 2.6.32-bpo with virtio-block, on a LVM partition in /dev/md2 2) "galemo": Debian Lenny, Kernel 2.6.32-bpo with virtio-block, on a qemu-file on LVM partition on /dev/md3 The KVM parameters are attached on the end of this mail. I did extensive disk-read I/O testing on the host without any guests started, e.g. on the devices itself (sda-sdf in parallel) and on the md-devices, then also on the LVM volumes, parallel, several combinations. The reads are all very fast and stable, no stucks, no problems, which leads me to the conclusion that the hardware and host system is o.k. Next in my test I start a KVM guest during these read tests on all devices (sda-sdf). As soon as a KVM is started, the stucks begin to appear. So, if I start the virtual machine "galemo", which reads from /dev/md3, the read tests on sdb and sdd begin to have stucks, if I start "vmUranos", stucks happen on sda/sdc. These stucks can be seen both on the host and in the guest, whereas they seem more severe in the guest. If I shutdown/destroy the guests while performing read tests the stucks on the host persist, although the KVM process is gone. If I stop all read tests and wait for some time, I can restart the read tests and the stucks are gone, so the system seems to have recovered. My impression is that KVM (and/or virtio-block) seems to affect the I/O subsystem in some way, so that it gets mixed up in some way, e.g. some scheduler does not know how to distribute I/O reads, or something like that. I have absolutely no clue what to do to solve the problem, my last idea would be to change the mainboard, as it has the i5500 chipset instead of the more common i5000 server chipset. What's your opinion on this? Any help is appreciated! Best Regards, Hermann P.S.: Here are the KVM parameters: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 1024 -smp 2,sockets=2,cores=1,threads=1 -name vmUranos -uuid 8e5139ce-c561-c52f-35e1-07db9bc5045b -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/vmUranos.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive file=/dev/capella_raptor/UranosBase,if=none,id=drive-virtio-disk0,boot=on,cache=none -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -device virtio-net-pci,vlan=0,id=net0,mac=54:52:00:03:f4:ca,bus=pci.0,addr=0x5 -net tap,fd=17,vlan=0,name=hostnet0 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:0 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 /usr/bin/kvm -S -M pc -enable-kvm -m 1024 -smp 1,sockets=1,cores=1,threads=1 -name galemo -uuid 171b4536-84ea-041d-d318-16b8fb20f855 -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/galemo.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive file=/dev/capella_data1/galemo,if=none,id=drive-virtio-disk0,boot=on -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -device virtio-net-pci,vlan=0,id=net0,mac=54:52:00:45:9c:d9,bus=pci.0,addr=0x5 -net tap,fd=18,vlan=0,name=hostnet0 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:1 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 -- herm...@qwer.tk GPG key ID: 299893C7 (on keyservers) FP: 0124 2584 8809 EF2A DBF9 4902 64B4 D16B 2998 93C7 -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
