Hi,
If scsi card has optionrom with only one bcv then Seabios can determine
its boot order from device path, so why not provide user with this
option today?
It's unclear to me how SeaBIOS is supposed to do that.
Try to keep track of which bcv/bev belongs to which pci device? It
should surely work for devices supported by seabios natively. SeaBIOS
should also know which device's rom registered which entry. It might
become tricky though in case there are multiple identical devices are
present, say two e1000 cards, where the first rom could register entries
for both cards ...
Maybe we can compromise here - if the user selects booting from a
device, and qemu sees there is a rom for that device, then qemu can
specify two boot options:
/p...@i0cf8/ether...@4/ethernet-...@0
/p...@i0cf8/r...@4
SeaBIOS will ignore the first entry, and act on the second entry.
SeaBIOS should be able to operate just fine with the first entry.
"ether...@4" means "the nic at bus address 4". As this is a PCI bus "4"
is the pci address. So SeaBIOS would just look what entries it has for
"00:04.0", run the rom, and ignore the "/ethernet-...@0" part as it
can't handle it.
In case of scsi seabios can look at the next path element to figure the
scsi id. With native support it should be able to boot the correct disk
directly. When booting via rom it can either just pick the first entry
unconditionally (probably good enougth in 99% of the cases) or do some
guesswork based on the order the entries are registered.
BTW, how are PCI locations specified in these paths? They should have
a (bus, dev, fn) - your examples only seem to show dev. How are the
other parts specified?
fn is optional for fn=0, IIRC the syntax is "$cl...@$dev,$fn".
Bus is specified via location in the tree, i.e. you'll see the bridge
for the secondary pci bus in the path, like this:
/p...@i0cf8/bri...@7/ether...@3/...
(not sure it is actually named 'bridge' in the openfirmware specs though).
cheers,
Gerd
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html