On 22/05/12 13:21, Alexander Graf wrote:
>
>
> On 22.05.2012, at 04:02, Benjamin Herrenschmidt <b...@kernel.crashing.org>
> wrote:
>
>> On Fri, 2012-05-18 at 15:12 +1000, Alexey Kardashevskiy wrote:
>>> Alexander,
>>>
>>> Is that any better? :)
>>
>> Alex (Graf that is), ping ?
>>
>> The original patch from Alexey was fine btw.
>>
>> VFIO will always call things with the existing capability offset so
>> there's no real risk of doing the wrong thing or break the list or
>> anything.
>>
>> IE. A small simple patch that addresses the problem :-)
>>
>> The new patch is a bit more "robust" I believe, I don't think we need to
>> go too far to fix a problem we don't have. But we need a fix for the
>> real issue and the simple patch does it neatly from what I can
>> understand.
>>
>> Cheers,
>> Ben.
>>
>>>
>>> @@ -1779,11 +1779,29 @@ static void pci_del_option_rom(PCIDevice *pdev)
>>> * in pci config space */
>>> int pci_add_capability(PCIDevice *pdev, uint8_t cap_id,
>>> uint8_t offset, uint8_t size)
>>> {
>>> - uint8_t *config;
>>> + uint8_t *config, existing;
>
> Existing is a pointer to the target dev's config space, right?
Yes.
>>> int i, overlapping_cap;
>>>
>>> + existing = pci_find_capability(pdev, cap_id);
>>> + if (existing) {
>>> + if (offset && (existing != offset)) {
>>> + return -EEXIST;
>>> + }
>>> + for (i = existing; i < size; ++i) {
>
> So how does this possibly make sense?
Although I do not expect VFIO to add capabilities (does not make sense), I
still want to double
check that this space has not been tried to use by someone else.
>>> + if (pdev->used[i]) {
>>> + return -EFAULT;
>>> + }
>>> + }
>>> + memset(pdev->used + offset, 0xFF, size);
> Why?
Because I am marking the space this capability takes as used.
>>> + /* Make capability read-only by default */
>>> + memset(pdev->wmask + offset, 0, size);
> Why?
Because the pci_add_capability() does it for a new capability by default.
>>> + /* Check capability by default */
>>> + memset(pdev->cmask + offset, 0xFF, size);
>
> I don't understand this part either.
The pci_add_capability() does it for a new capability by default.
>
> Alex
>
>>> + return existing;
>>> + }
>>> +
>>> if (!offset) {
>>> offset = pci_find_space(pdev, size);
>>> if (!offset) {
>>> return -ENOSPC;
>>>
>>>
>>>
>>>
>>>
>>>
>>> On 14/05/12 13:49, Alexey Kardashevskiy wrote:
>>>> On 12/05/12 00:13, Alexander Graf wrote:
>>>>>
>>>>> On 11.05.2012, at 14:47, Alexey Kardashevskiy wrote:
>>>>>
>>>>>> 11.05.2012 20:52, Alexander Graf написал:
>>>>>>>
>>>>>>> On 11.05.2012, at 08:45, Alexey Kardashevskiy wrote:
>>>>>>>
>>>>>>>> Normally the pci_add_capability is called on devices to add new
>>>>>>>> capability. This is ok for emulated devices which capabilities list
>>>>>>>> is being built by QEMU.
>>>>>>>>
>>>>>>>> In the case of VFIO the capability may already exist and adding new
>>>>>>>> capability into the beginning of the linked list may create a loop.
>>>>>>>>
>>>>>>>> For example, the old code destroys the following config
>>>>>>>> of PCIe Intel E1000E:
>>>>>>>>
>>>>>>>> before adding PCI_CAP_ID_MSI (0x05):
>>>>>>>> 0x34: 0xC8
>>>>>>>> 0xC8: 0x01 0xD0
>>>>>>>> 0xD0: 0x05 0xE0
>>>>>>>> 0xE0: 0x10 0x00
>>>>>>>>
>>>>>>>> after:
>>>>>>>> 0x34: 0xD0
>>>>>>>> 0xC8: 0x01 0xD0
>>>>>>>> 0xD0: 0x05 0xC8
>>>>>>>> 0xE0: 0x10 0x00
>>>>>>>>
>>>>>>>> As result capabilities 0x01 and 0x05 point to each other.
>>>>>>>>
>>>>>>>> The proposed patch does not change capability pointers when
>>>>>>>> the same type capability is about to add.
>>>>>>>>
>>>>>>>> Signed-off-by: Alexey Kardashevskiy <a...@ozlabs.ru>
>>>>>>>> ---
>>>>>>>> hw/pci.c | 10 ++++++----
>>>>>>>> 1 files changed, 6 insertions(+), 4 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/hw/pci.c b/hw/pci.c
>>>>>>>> index aa0c0b8..1f7c924 100644
>>>>>>>> --- a/hw/pci.c
>>>>>>>> +++ b/hw/pci.c
>>>>>>>> @@ -1794,10 +1794,12 @@ int pci_add_capability(PCIDevice *pdev,
>>>>>>>> uint8_t cap_id,
>>>>>>>> }
>>>>>>>>
>>>>>>>> config = pdev->config + offset;
>>>>>>>> - config[PCI_CAP_LIST_ID] = cap_id;
>>>>>>>> - config[PCI_CAP_LIST_NEXT] = pdev->config[PCI_CAPABILITY_LIST];
>>>>>>>> - pdev->config[PCI_CAPABILITY_LIST] = offset;
>>>>>>>> - pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
>>>>>>>> + if (config[PCI_CAP_LIST_ID] != cap_id) {
>>>>>>>
>>>>>>> This doesn't scale. Capabilities are a list of CAPs. You'll have to do
>>>>>>> a loop through all capabilities, check if the one you want to add is
>>>>>>> there already and if so either
>>>>>>> * replace the existing one or
>>>>>>> * drop out and not write the new one in.
>>>>>
>>>>> * hw_error :)
>>>>>
>>>>>>>
>>>>>>> I'm not sure which way would be more natural.
>>>>>>
>>>>>> There is a third option - add another function, lets call it
>>>>>> pci_fixup_capability() which would do whatever pci_add_capability() does
>>>>>> but won't touch list pointers.
>>>>>
>>>>> What good is a function that breaks internal consistency?
>>>>
>>>>
>>>> It is broken already by having PCIDevice.used field. Normally
>>>> pci_add_capability() would go through
>>>> the whole list and add a capability if it does not exist. Emulated devices
>>>> which care about having a
>>>> capability at some fixed offset would have initialized their config space
>>>> before calling this
>>>> capabilities API (as VFIO does).
>>>>
>>>> If we really want to support emulated devices which want some capabilities
>>>> be at fixed offset and
>>>> others at random offsets (strange, but ok), I do not see how it is bad to
>>>> restore this consistency
>>>> by special function (pci_fixup_capability()) to avoid its rewriting at
>>>> different location as a guest
>>>> driver may care about its offset.
>>>>
>>>>
>>>>
>>>>>> When vfio, pci_add_capability() is called from the code which knows
>>>>>> exactly that the capability exists and where it is and it calls
>>>>>> pci_add_capability() based on this knowledge so doing additional loops
>>>>>> just for imaginery scalability is a bit weird, no?
>>>>>
>>>>> Not sure I understand your proposal. The more generic a framework is, the
>>>>> better, no? In this code path we don't care about speed. We only care
>>>>> about consistency and reliability.
>>>>>
>>>>>
>>>>> Alex
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
