i tried now the alpha of ubuntu 12.10 that includes qemu-kvm 1.1
and a 3.5 kernel version.
the "msr" problem is gone now, i was able to select "sandybridge" as
cpu topology, this removed the MSR error messages.
thats the positive part...
unfortunately i had no success with the other topics (rebootability and
the soundcard)
rebootability:
the guest vm still crashes with a page fault bluescreen
soundcard:
it would be really nice if someone would be able to give me
some advise how to debug this problem.
thank you for your help
Am 18.07.2012 16:23, schrieb Alex Williamson:
On Wed, 2012-07-18 at 14:37 +0200, Martin Wolf wrote:
soundcard logs added
On 18.07.2012 14:08, Martin Wolf wrote:
On 18.07.2012 11:26, Jan Kiszka wrote:
On 2012-07-18 07:45, Martin Wolf wrote:
Hello,
i was able to passthrough an AMD 7870 videocard to my win7 guest
machine.
Would you add it to http://www.linux-kvm.org/page/VGA_device_assignment?
sure, i will prepare something
my host is ubuntu 12.04 with stock kernel.
my system contains:
dq67sw q67 mainboard
i5-2400s cpu
sapphire 7870 amd videocard
xonar d2x (problems to passthrough)
for full functionality i just needed two options
- kernel : iommu=on
- kvm module: ignore_msrs=1
(if i would not set it the guest os would crash with a bluescreen)
Can you report (=> kernel log) which MSRs are unknown to KVM?
Jul 18 14:03:33 kvm-xen kernel: [ 437.309931] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.522724] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.522733] kvm: 3347: cpu1 ignored
rdmsr: 0x1c9
Jul 18 14:03:33 kvm-xen kernel: [ 437.522736] kvm: 3347: cpu1 ignored
rdmsr: 0x60
Jul 18 14:03:33 kvm-xen kernel: [ 437.522752] kvm: 3347: cpu1 ignored
rdmsr: 0x1c9
Jul 18 14:03:33 kvm-xen kernel: [ 437.522755] kvm: 3347: cpu1 ignored
rdmsr: 0x60
Jul 18 14:03:33 kvm-xen kernel: [ 437.522821] kvm: 3347: cpu1 ignored
rdmsr: 0x1c9
Jul 18 14:03:33 kvm-xen kernel: [ 437.522823] kvm: 3347: cpu1 ignored
rdmsr: 0x60
Jul 18 14:03:33 kvm-xen kernel: [ 437.522834] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.522840] kvm: 3347: cpu1 ignored
rdmsr: 0x1c9
Jul 18 14:03:33 kvm-xen kernel: [ 437.522842] kvm: 3347: cpu1 ignored
rdmsr: 0x60
Jul 18 14:03:33 kvm-xen kernel: [ 437.522865] kvm: 3347: cpu1 ignored
rdmsr: 0x1c9
Jul 18 14:03:33 kvm-xen kernel: [ 437.522867] kvm: 3347: cpu1 ignored
rdmsr: 0x60
Jul 18 14:03:33 kvm-xen kernel: [ 437.522921] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.523005] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.523081] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.523175] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.523248] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.523333] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
Jul 18 14:03:33 kvm-xen kernel: [ 437.523430] kvm: 3347: cpu1
kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop
i hope thats the info you need, i booted it with ignore_msrs=1 since
if i dont do that i get less output.
(do you need it without the "option"?)
the unigine benchmark ran flawlessly
also the benchmark included in windows gave my videocard
similar values (7.7) comparable with my native win7 (7.9)
now to my questions...
1. is it possible to reset the videocard properly to be able to
reboot the vm?
Which versions of kernel and qemu-kvm are involved via your distro? Can
you retry with latest Linux (3.5-rcX) / lastest qemu-kvm? Maybe
something got fixed meanwhile.
In general, there are many adapters that require special procedures to
perform resets. This one may fall into that category as well.
i will do a test today.
2. the xonar d2x is a very nice audio card, it would be very handy
to be able to use it in the vm. in my oppinion the card is a
d2 with a pci-e to pci bridge.
i tried to passthrough the card alone and with the pci-bridge
that was shown though lspci, but i had no success.
maybe you guys here have an idea on that topic?
Any further details about the error? Does the adapter work with a Linux
guest or provide more information that way?
Jan
02:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI
Express-to-PCI Bridge (rev aa) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pci-stub
Kernel modules: shpchp
03:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788
[Oxygen HD Audio]
Subsystem: ASUSTeK Computer Inc. Virtuoso 200 (Xonar D2X)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d000 [disabled] [size=256]
Capabilities: <access denied>
Kernel driver in use: pci-stub
Kernel modules: snd-virtuoso
/usr/bin/qemu-system-x86_64 -cpu host -m 8192 -boot c -hda
/var/lib/libvirt/images/Win7.img -device pci-assign,host=02:00.0 -device
pci-assign,host=03:04.0
Device assignment only supports endpoint assignment, device type 7
qemu-system-x86_64: -device pci-assign,host=02:00.0: Device 'pci-assign'
could not be initialized
root@kvm-xen:~# /usr/bin/qemu-system-x86_64 -cpu host -m 8192 -boot c
-hda /var/lib/libvirt/images/Win7.img -device
pci-assign,host=03:04.0Failed to assign irq for "(null)": Input/output error
Perhaps you are assigning a device that shares an IRQ with another device?
qemu-system-x86_64: -device pci-assign,host=03:04.0: Device 'pci-assign'
could not be initialized
Either your distro isn't shipping a version of kvm that supports
interrupt sharing on PCI 2.3 complaint devices (likely) or your device
doesn't support PCI 2.3 INTx disable (possible). You either need to
unbind any other devices that may be sharing IRQ 11 with this device
from their driver or upgrade your kernel and qemu-kvm. Thanks,
Alex
--
Adiumentum GmbH
Gf. Martin Wolf
Banderbacherstraße 76
90513 Zirndorf
0911 / 9601470
mw...@adiumentum.com
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html