On 04/19/2013 09:06:26 AM, Alexander Graf wrote:
diff --git a/Documentation/virtual/kvm/devices/mpic.txt
b/Documentation/virtual/kvm/devices/mpic.txt
index ce98e32..dadc1e0 100644
--- a/Documentation/virtual/kvm/devices/mpic.txt
+++ b/Documentation/virtual/kvm/devices/mpic.txt
@@ -35,3 +35,14 @@ Groups:
"attr" is the IRQ number. IRQ numbers for standard sources are
the
byte offset of the relevant IVPR from EIVPR0, divided by 32.
+
+IRQ Routing:
+
+ The MPIC emulation supports IRQ routing. Only a single MPIC device
can
+ be instantiated. Once that device has been created, it's available
as
+ irqchip id 0.
+
+ This irqchip 0 has 256 interrupt pins. These pins reflect the SRC
pins
+ on the MPIC controller.
This irqchip 0 has 256 interrupt pins, which expose the interrupts in
the main array of interrupt sources (a.k.a. "SRC" interrupts). The
numbering is the same as the MPIC device tree binding -- based on the
register offset from the beginning of the sources array, without regard
to any subdivisions in chip documentation such as "internal" or
"external" interrupts. Default routes are established for these pins,
with the GSI being equal to the pin number.
+ Access to on-SRC registers is not implemented through IRQ routing
mechanisms.
s/on-SRC registers/non-SRC interrupts/
diff --git a/arch/powerpc/kvm/mpic.c b/arch/powerpc/kvm/mpic.c
index 10bc08a..d137df8 100644
--- a/arch/powerpc/kvm/mpic.c
+++ b/arch/powerpc/kvm/mpic.c
@@ -1029,6 +1029,7 @@ static int openpic_cpu_write_internal(void
*opaque, gpa_t addr,
struct irq_source *src;
struct irq_dest *dst;
int s_IRQ, n_IRQ;
+ int notify_eoi = -1;
pr_debug("%s: cpu %d addr %#llx <= 0x%08x\n", __func__, idx,
addr, val);
@@ -1087,6 +1088,8 @@ static int openpic_cpu_write_internal(void
*opaque, gpa_t addr,
}
IRQ_resetbit(&dst->servicing, s_IRQ);
+ /* Notify listeners that the IRQ is over */
+ notify_eoi = s_IRQ;
/* Set up next servicing IRQ */
s_IRQ = IRQ_get_next(opp, &dst->servicing);
/* Check queued interrupts. */
@@ -1104,6 +1107,12 @@ static int openpic_cpu_write_internal(void
*opaque, gpa_t addr,
break;
}
+ if (notify_eoi != -1) {
+ spin_unlock_irq(&opp->lock);
+ kvm_notify_acked_irq(opp->kvm, 0, notify_eoi);
+ spin_lock_irq(&opp->lock);
+ }
I'd rather not have the "_irq" here, which could break if we enter this
patch via an "_irqsave" (I realize there currently is no such path that
reaches EOI emulation).
Will we ever set notify_eoi when addr != EOI? I'm wondering why it was
moved out of the switch statement, instead of being put at the end of
the case EOI: code.
+/*
+ * Return value:
+ * < 0 Interrupt was ignored (masked or not delivered for other
reasons)
+ * = 0 Interrupt was coalesced (previous irq is still pending)
+ * > 0 Number of CPUs interrupt was delivered to
+ */
+static int mpic_set_irq(struct kvm_kernel_irq_routing_entry *e,
+ struct kvm *kvm, int irq_source_id, int level,
+ bool line_status)
+{
+ u32 irq = e->irqchip.pin;
+ struct openpic *opp = kvm->arch.mpic;
+
+ spin_lock_irq(&opp->lock);
+ openpic_set_irq(opp, irq, level);
+ spin_unlock_irq(&opp->lock);
Use irqsave here and in kvm_set_msi. The latter can already be called
with interrupts disabled, and we may want to do the same for non-MSIs
once we start assigning non-PCI devices (where there's no longer the
excuse of "if you want it to be fast, use MSIs").
-Scott
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html