ok, I will handle all above in the following commit.
Arthur Chunqi Li
Department of Computer Science
School of EECS
Peking University
Beijing, China
>From my iPhone
在 2013-6-20，16:48，Gleb Natapov <g...@redhat.com> 写道：
> On Wed, Jun 19, 2013 at 11:00:56PM +0800, Arthur Chunqi Li wrote:
>> Add a function trap_emulator to run an instruction in emulator.
>> Set inregs first (%rax is invalid because it is used as return
>> address), put instruction codec in alt_insn and call func with
>> alt_insn_length. Get results in outregs.
>>
>> Signed-off-by: Arthur Chunqi Li <yzt...@gmail.com>
>> ---
>> x86/emulator.c | 110
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 110 insertions(+)
>> mode change 100644 => 100755 x86/emulator.c
>>
>> diff --git a/x86/emulator.c b/x86/emulator.c
>> old mode 100644
>> new mode 100755
>> index 96576e5..48d45c8
>> --- a/x86/emulator.c
>> +++ b/x86/emulator.c
>> @@ -11,6 +11,15 @@ int fails, tests;
>>
>> static int exceptions;
>>
>> +struct regs {
>> + u64 rax, rbx, rcx, rdx;
>> + u64 rsi, rdi, rsp, rbp;
>> + u64 r8, r9, r10, r11;
>> + u64 r12, r13, r14, r15;
>> + u64 rip, rflags;
>> +};
>> +struct regs inregs, outregs, save;
>> +
>> void report(const char *name, int result)
>> {
>> ++tests;
>> @@ -685,6 +694,107 @@ static void test_shld_shrd(u32 *mem)
>> report("shrd (cl)", *mem == ((0x12345678 >> 3) | (5u << 29)));
>> }
>>
>> +#define INSN_SAVE \
> No need for all the defines. Put all the code into insn_page, allocate
> alt_insn_page dynamically and copy the code there by memcpy.
>
>> + "ret\n\t" \
>> + "pushf\n\t" \
>> + "push 136+save \n\t" \
>> + "popf \n\t" \
>> + "xchg %rax, 0+save \n\t" \
>> + "xchg %rbx, 8+save \n\t" \
>> + "xchg %rcx, 16+save \n\t" \
>> + "xchg %rdx, 24+save \n\t" \
>> + "xchg %rsi, 32+save \n\t" \
>> + "xchg %rdi, 40+save \n\t" \
>> + "xchg %rsp, 48+save \n\t" \
>> + "xchg %rbp, 56+save \n\t" \
>> + "xchg %r8, 64+save \n\t" \
>> + "xchg %r9, 72+save \n\t" \
>> + "xchg %r10, 80+save \n\t" \
>> + "xchg %r11, 88+save \n\t" \
>> + "xchg %r12, 96+save \n\t" \
>> + "xchg %r13, 104+save \n\t" \
>> + "xchg %r14, 112+save \n\t" \
>> + "xchg %r15, 120+save \n\t" \
>> +
>> +#define INSN_RESTORE \
>> + "xchg %rax, 0+save \n\t" \
>> + "xchg %rbx, 8+save \n\t" \
>> + "xchg %rcx, 16+save \n\t" \
>> + "xchg %rdx, 24+save \n\t" \
>> + "xchg %rsi, 32+save \n\t" \
>> + "xchg %rdi, 40+save \n\t" \
>> + "xchg %rsp, 48+save \n\t" \
>> + "xchg %rbp, 56+save \n\t" \
>> + "xchg %r8, 64+save \n\t" \
>> + "xchg %r9, 72+save \n\t" \
>> + "xchg %r10, 80+save \n\t" \
>> + "xchg %r11, 88+save \n\t" \
>> + "xchg %r12, 96+save \n\t" \
>> + "xchg %r13, 104+save \n\t" \
>> + "xchg %r14, 112+save \n\t" \
>> + "xchg %r15, 120+save \n\t" \
>> + "pushf \n\t" \
>> + "pop 136+save \n\t" \
>> + "popf \n\t" \
>> + "ret \n\t" \
>> +
>> +#define INSN_TRAP \
>> + "in (%dx),%al\n\t" \
>> + ". = . + 31\n\t" \
> If you will do ".skip 31, 0x90\n\t" instead you can drop loop
> that inserts nops bellow.
>
>> +
>> +asm(
>> + ".align 4096\n\t"
>> + "insn_page:\n\t"
>> + INSN_SAVE
>> + "test_insn:\n\t"
>> + INSN_TRAP
>> + "test_insn_end:\n\t"
>> + INSN_RESTORE
>> + "insn_page_end:\n\t"
>> + ".align 4096\n\t"
>> +
>> + "alt_insn_page:\n\t"
>> + INSN_SAVE
>> + "alt_test_insn:\n\t"
>> + INSN_TRAP
>> + "alt_test_insn_end:\n\t"
>> + INSN_RESTORE
>> + "alt_insn_page_end:\n\t"
>> + ".align 4096\n\t"
>> +);
>> +
>> +static void trap_emulator(uint64_t *mem, uint8_t* alt_insn, int
>> alt_insn_length)
>> +{
>> + ulong *cr3 = (ulong *)read_cr3();
>> + void *insn_ram;
>> + int i;
>> + extern u8 insn_page[], test_insn[], test_insn_end[];
>> + extern u8 alt_insn_page[], alt_test_insn[];
>> +
>> + insn_ram = vmap(virt_to_phys(insn_page), 4096);
>> + for (i=1; i<test_insn_end - test_insn; i++)
>> + alt_test_insn[i] = test_insn[i] = 0x90; // nop
>> + for (i=0; i<alt_insn_length; i++)
>> + alt_test_insn[i] = alt_insn[i];
>> + for(;i<test_insn_end - test_insn; i++)
>> + alt_test_insn[i] = 0x90; // nop
>> + save = inregs;
>> +
>> + // Load the code TLB with insn_page, but point the page tables at
>> + // alt_insn_page (and keep the data TLB clear, for AMD decode assist).
>> + // This will make the CPU trap on the insn_page instruction but the
>> + // hypervisor will see alt_insn_page.
> I prefer all the comments to be changed to /**/ style while we are at it.
>
>> + install_page(cr3, virt_to_phys(insn_page), insn_ram);
>> + invlpg(insn_ram);
>> + // Load code TLB
>> + asm volatile("call *%0" : : "r"(insn_ram));
>> + install_page(cr3, virt_to_phys(alt_insn_page), insn_ram);
>> + // Trap, let hypervisor emulate at alt_insn_page
>> + asm volatile("call *%0": : "r"(insn_ram+1));
>> +
>> + outregs = save;
>> +}
>> +
>> static void advance_rip_by_3_and_note_exception(struct ex_regs *regs)
>> {
>> ++exceptions;
>> --
>> 1.7.9.5
>
> --
> Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
