Il 16/09/2013 10:11, Arthur Chunqi Li ha scritto:
> This patch contains the following two changes:
> 1. Fix the bug in nested preemption timer support. If vmexit L2->L0
> with some reasons not emulated by L1, preemption timer value should
> be save in such exits.
> 2. Add support of "Save VMX-preemption timer value" VM-Exit controls
> to nVMX.
>
> With this patch, nested VMX preemption timer features are fully
> supported.
>
> Signed-off-by: Arthur Chunqi Li <yzt...@gmail.com>
> ---
> ChangeLog to v4:
> Format changes and remove a flag in nested_vmx.
> arch/x86/include/uapi/asm/msr-index.h | 1 +
> arch/x86/kvm/vmx.c | 44
> +++++++++++++++++++++++++++++++--
> 2 files changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/include/uapi/asm/msr-index.h
> b/arch/x86/include/uapi/asm/msr-index.h
> index bb04650..b93e09a 100644
> --- a/arch/x86/include/uapi/asm/msr-index.h
> +++ b/arch/x86/include/uapi/asm/msr-index.h
> @@ -536,6 +536,7 @@
>
> /* MSR_IA32_VMX_MISC bits */
> #define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29)
> +#define MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE 0x1F
> /* AMD-V MSRs */
>
> #define MSR_VM_CR 0xc0010114
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 1f1da43..e1fa13a 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -2204,7 +2204,13 @@ static __init void nested_vmx_setup_ctls_msrs(void)
> #ifdef CONFIG_X86_64
> VM_EXIT_HOST_ADDR_SPACE_SIZE |
> #endif
> - VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT;
> + VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT |
> + VM_EXIT_SAVE_VMX_PREEMPTION_TIMER;
> + if (!(nested_vmx_pinbased_ctls_high & PIN_BASED_VMX_PREEMPTION_TIMER) ||
> + !(nested_vmx_exit_ctls_high &
> VM_EXIT_SAVE_VMX_PREEMPTION_TIMER)) {
> + nested_vmx_exit_ctls_high &= ~VM_EXIT_SAVE_VMX_PREEMPTION_TIMER;
> + nested_vmx_pinbased_ctls_high &=
> ~PIN_BASED_VMX_PREEMPTION_TIMER;
> + }
> nested_vmx_exit_ctls_high |= (VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |
> VM_EXIT_LOAD_IA32_EFER);
>
> @@ -6707,6 +6713,27 @@ static void vmx_get_exit_info(struct kvm_vcpu *vcpu,
> u64 *info1, u64 *info2)
> *info2 = vmcs_read32(VM_EXIT_INTR_INFO);
> }
>
> +static void nested_adjust_preemption_timer(struct kvm_vcpu *vcpu)
> +{
> + u64 delta_tsc_l1;
> + u32 preempt_val_l1, preempt_val_l2, preempt_scale;
> +
> + if (!(get_vmcs12(vcpu)->pin_based_vm_exec_control &
> + PIN_BASED_VMX_PREEMPTION_TIMER))
> + return;
> + preempt_scale = native_read_msr(MSR_IA32_VMX_MISC) &
> + MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE;
> + preempt_val_l2 = vmcs_read32(VMX_PREEMPTION_TIMER_VALUE);
> + delta_tsc_l1 = vmx_read_l1_tsc(vcpu, native_read_tsc())
> + - vcpu->arch.last_guest_tsc;
> + preempt_val_l1 = delta_tsc_l1 >> preempt_scale;
> + if (preempt_val_l2 <= preempt_val_l1)
> + preempt_val_l2 = 0;
> + else
> + preempt_val_l2 -= preempt_val_l1;
> + vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, preempt_val_l2);
> +}
> +
> /*
> * The guest has exited. See if we can fix it or if we need userspace
> * assistance.
> @@ -7131,6 +7158,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu
> *vcpu)
> atomic_switch_perf_msrs(vmx);
> debugctlmsr = get_debugctlmsr();
>
> + if (is_guest_mode(vcpu) && !(vmx->nested.nested_run_pending))
> + nested_adjust_preemption_timer(vcpu);
> vmx->__launched = vmx->loaded_vmcs->launched;
> asm(
> /* Store host registers */
> @@ -7518,6 +7547,7 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu,
> struct vmcs12 *vmcs12)
> {
> struct vcpu_vmx *vmx = to_vmx(vcpu);
> u32 exec_control;
> + u32 exit_control;
>
> vmcs_write16(GUEST_ES_SELECTOR, vmcs12->guest_es_selector);
> vmcs_write16(GUEST_CS_SELECTOR, vmcs12->guest_cs_selector);
> @@ -7691,7 +7721,10 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu,
> struct vmcs12 *vmcs12)
> * we should use its exit controls. Note that VM_EXIT_LOAD_IA32_EFER
> * bits are further modified by vmx_set_efer() below.
> */
> - vmcs_write32(VM_EXIT_CONTROLS, vmcs_config.vmexit_ctrl);
> + exit_control = vmcs_config.vmexit_ctrl;
> + if (vmcs12->pin_based_vm_exec_control & PIN_BASED_VMX_PREEMPTION_TIMER)
> + exit_control |= VM_EXIT_SAVE_VMX_PREEMPTION_TIMER;
> + vmcs_write32(VM_EXIT_CONTROLS, exit_control);
>
> /* vmcs12's VM_ENTRY_LOAD_IA32_EFER and VM_ENTRY_IA32E_MODE are
> * emulated by vmx_set_efer(), below.
> @@ -8090,6 +8123,13 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu,
> struct vmcs12 *vmcs12)
> vmcs12->guest_pending_dbg_exceptions =
> vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS);
>
> + if ((vmcs12->pin_based_vm_exec_control &
> + PIN_BASED_VMX_PREEMPTION_TIMER) &&
> + (vmcs12->vm_exit_controls &
> + VM_EXIT_SAVE_VMX_PREEMPTION_TIMER))
> + vmcs12->vmx_preemption_timer_value =
> + vmcs_read32(VMX_PREEMPTION_TIMER_VALUE);
> +
> /*
> * In some cases (usually, nested EPT), L2 is allowed to change its
> * own CR3 without exiting. If it has changed it, we must keep it.
>
Applying to kvm/queue, thanks.
Paolo
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
