On Thu, 22 Feb 2018 09:02:48 +0000,
Christoffer Dall wrote:
>
> On Wed, Feb 21, 2018 at 11:34:07AM +0000, Marc Zyngier wrote:
> > On Thu, 15 Feb 2018 21:02:55 +0000,
> > Christoffer Dall wrote:
> > >
> > > We already have the percpu area for the host cpu state, which points to
> > > the VCPU, so there's no need to store the VCPU pointer on the stack on
> > > every context switch. We can be a little more clever and just use
> > > tpidr_el2 for the percpu offset and load the VCPU pointer from the host
> > > context.
> > >
> > > This does require us to calculate the percpu offset without including
> > > the offset from the kernel mapping of the percpu array to the linear
> > > mapping of the array (which is what we store in tpidr_el1), because a
> > > PC-relative generated address in EL2 is already giving us the hyp alias
> > > of the linear mapping of a kernel address. We do this in
> > > __cpu_init_hyp_mode() by using kvm_ksym_ref().
> > >
> > > This change also requires us to have a scratch register, so we take the
> > > chance to rearrange some of the el1_sync code to only look at the
> > > vttbr_el2 to determine if this is a trap from the guest or an HVC from
> > > the host. We do add an extra check to call the panic code if the kernel
> > > is configured with debugging enabled and we saw a trap from the host
> > > which wasn't an HVC, indicating that we left some EL2 trap configured by
> > > mistake.
> > >
> > > The code that accesses ESR_EL2 was previously using an alternative to
> > > use the _EL1 accessor on VHE systems, but this was actually unnecessary
> > > as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2
> > > accessor does the same thing on both systems.
> > >
> > > Cc: Ard Biesheuvel <ard.biesheu...@linaro.org>
> > > Signed-off-by: Christoffer Dall <christoffer.d...@linaro.org>
> > > ---
> > >
> > > Notes:
> > > Changes since v3:
> > > - Reworked the assembly part of the patch after rebasing on v4.16-rc1
> > > which created a conflict with the variant 2 mitigations.
> > > - Removed Marc's reviewed-by due to the rework.
> > > - Removed unneeded extern keyword in declaration in header file
> > >
> > > Changes since v1:
> > > - Use PC-relative addressing to access per-cpu variables instead of
> > > using a load from the literal pool.
> > > - Remove stale comments as pointed out by Marc
> > > - Reworded the commit message as suggested by Drew
> > >
> > > arch/arm64/include/asm/kvm_asm.h | 14 ++++++++++++++
> > > arch/arm64/include/asm/kvm_host.h | 15 +++++++++++++++
> > > arch/arm64/kernel/asm-offsets.c | 1 +
> > > arch/arm64/kvm/hyp/entry.S | 6 +-----
> > > arch/arm64/kvm/hyp/hyp-entry.S | 31 +++++++++++++------------------
> > > arch/arm64/kvm/hyp/switch.c | 5 +----
> > > arch/arm64/kvm/hyp/sysreg-sr.c | 5 +++++
> > > 7 files changed, 50 insertions(+), 27 deletions(-)
> > >
> > > diff --git a/arch/arm64/include/asm/kvm_asm.h
> > > b/arch/arm64/include/asm/kvm_asm.h
> > > index 24961b732e65..6b626750b0a1 100644
> > > --- a/arch/arm64/include/asm/kvm_asm.h
> > > +++ b/arch/arm64/include/asm/kvm_asm.h
> > > @@ -33,6 +33,7 @@
> > > #define KVM_ARM64_DEBUG_DIRTY_SHIFT 0
> > > #define KVM_ARM64_DEBUG_DIRTY (1 <<
> > > KVM_ARM64_DEBUG_DIRTY_SHIFT)
> > >
> > > +/* Translate a kernel address of @sym into its equivalent linear mapping
> > > */
> > > #define kvm_ksym_ref(sym)
> > > \
> > > ({ \
> > > void *val = &sym; \
> > > @@ -70,6 +71,19 @@ extern u32 __init_stage2_translation(void);
> > >
> > > extern void __qcom_hyp_sanitize_btac_predictors(void);
> > >
> > > +#else /* __ASSEMBLY__ */
> > > +
> > > +.macro get_host_ctxt reg, tmp
> > > + adr_l \reg, kvm_host_cpu_state
> > > + mrs \tmp, tpidr_el2
> > > + add \reg, \reg, \tmp
> > > +.endm
> > > +
> > > +.macro get_vcpu vcpu, ctxt
> > > + ldr \vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
> > > + kern_hyp_va \vcpu
> > > +.endm
> > > +
> > > #endif
> > >
> > > #endif /* __ARM_KVM_ASM_H__ */
> > > diff --git a/arch/arm64/include/asm/kvm_host.h
> > > b/arch/arm64/include/asm/kvm_host.h
> > > index 596f8e414a4c..618cfee7206a 100644
> > > --- a/arch/arm64/include/asm/kvm_host.h
> > > +++ b/arch/arm64/include/asm/kvm_host.h
> > > @@ -358,10 +358,15 @@ int kvm_perf_teardown(void);
> > >
> > > struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> > >
> > > +void __kvm_set_tpidr_el2(u64 tpidr_el2);
> > > +DECLARE_PER_CPU(kvm_cpu_context_t, kvm_host_cpu_state);
> > > +
> > > static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
> > > unsigned long hyp_stack_ptr,
> > > unsigned long vector_ptr)
> > > {
> > > + u64 tpidr_el2;
> > > +
> > > /*
> > > * Call initialization code, and switch to the full blown HYP code.
> > > * If the cpucaps haven't been finalized yet, something has gone very
> > > @@ -370,6 +375,16 @@ static inline void __cpu_init_hyp_mode(phys_addr_t
> > > pgd_ptr,
> > > */
> > > BUG_ON(!static_branch_likely(&arm64_const_caps_ready));
> > > __kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr);
> > > +
> > > + /*
> > > + * Calculate the raw per-cpu offset without a translation from the
> > > + * kernel's mapping to the linear mapping, and store it in tpidr_el2
> > > + * so that we can use adr_l to access per-cpu variables in EL2.
> > > + */
> > > + tpidr_el2 = (u64)this_cpu_ptr(&kvm_host_cpu_state)
> > > + - (u64)kvm_ksym_ref(kvm_host_cpu_state);
> > > +
> > > + kvm_call_hyp(__kvm_set_tpidr_el2, tpidr_el2);
> > > }
> > >
> > > static inline void kvm_arch_hardware_unsetup(void) {}
> > > diff --git a/arch/arm64/kernel/asm-offsets.c
> > > b/arch/arm64/kernel/asm-offsets.c
> > > index 1303e04110cd..78e1b0a70aaf 100644
> > > --- a/arch/arm64/kernel/asm-offsets.c
> > > +++ b/arch/arm64/kernel/asm-offsets.c
> > > @@ -138,6 +138,7 @@ int main(void)
> > > DEFINE(CPU_FP_REGS, offsetof(struct kvm_regs, fp_regs));
> > > DEFINE(VCPU_FPEXC32_EL2, offsetof(struct kvm_vcpu,
> > > arch.ctxt.sys_regs[FPEXC32_EL2]));
> > > DEFINE(VCPU_HOST_CONTEXT, offsetof(struct kvm_vcpu,
> > > arch.host_cpu_context));
> > > + DEFINE(HOST_CONTEXT_VCPU, offsetof(struct kvm_cpu_context,
> > > __hyp_running_vcpu));
> > > #endif
> > > #ifdef CONFIG_CPU_PM
> > > DEFINE(CPU_SUSPEND_SZ, sizeof(struct cpu_suspend_ctx));
> > > diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
> > > index fdd1068ee3a5..1f458f7c3b44 100644
> > > --- a/arch/arm64/kvm/hyp/entry.S
> > > +++ b/arch/arm64/kvm/hyp/entry.S
> > > @@ -62,9 +62,6 @@ ENTRY(__guest_enter)
> > > // Store the host regs
> > > save_callee_saved_regs x1
> > >
> > > - // Store host_ctxt and vcpu for use at exit time
> > > - stp x1, x0, [sp, #-16]!
> > > -
> > > add x18, x0, #VCPU_CONTEXT
> > >
> > > // Restore guest regs x0-x17
> > > @@ -118,8 +115,7 @@ ENTRY(__guest_exit)
> > > // Store the guest regs x19-x29, lr
> > > save_callee_saved_regs x1
> > >
> > > - // Restore the host_ctxt from the stack
> > > - ldr x2, [sp], #16
> > > + get_host_ctxt x2, x3
> > >
> > > // Now restore the host regs
> > > restore_callee_saved_regs x2
> > > diff --git a/arch/arm64/kvm/hyp/hyp-entry.S
> > > b/arch/arm64/kvm/hyp/hyp-entry.S
> > > index f36464bd57c5..559b4d54bc42 100644
> > > --- a/arch/arm64/kvm/hyp/hyp-entry.S
> > > +++ b/arch/arm64/kvm/hyp/hyp-entry.S
> > > @@ -57,13 +57,8 @@ ENDPROC(__vhe_hyp_call)
> > > el1_sync: // Guest trapped into EL2
> > > stp x0, x1, [sp, #-16]!
> > >
> > > -alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
> > > - mrs x1, esr_el2
> > > -alternative_else
> > > - mrs x1, esr_el1
> > > -alternative_endif
> > > - lsr x0, x1, #ESR_ELx_EC_SHIFT
> > > -
> > > + mrs x0, esr_el2
> > > + lsr x0, x0, #ESR_ELx_EC_SHIFT
> > > cmp x0, #ESR_ELx_EC_HVC64
> > > ccmp x0, #ESR_ELx_EC_HVC32, #4, ne
> > > b.ne el1_trap
> > > @@ -117,10 +112,15 @@ el1_hvc_guest:
> > > eret
> > >
> > > el1_trap:
> > > + get_host_ctxt x0, x1
> > > + get_vcpu x1, x0
> > > +
> > > + mrs x0, esr_el2
> > > + lsr x0, x0, #ESR_ELx_EC_SHIFT
> > > /*
> > > * x0: ESR_EC
> > > + * x1: vcpu pointer
> > > */
> > > - ldr x1, [sp, #16 + 8] // vcpu stored by __guest_enter
> > >
> > > /*
> > > * We trap the first access to the FP/SIMD to save the host context
> > > @@ -138,13 +138,15 @@ alternative_else_nop_endif
> > >
> > > el1_irq:
> > > stp x0, x1, [sp, #-16]!
> > > - ldr x1, [sp, #16 + 8]
> > > + get_host_ctxt x0, x1
> > > + get_vcpu x1, x0
> > > mov x0, #ARM_EXCEPTION_IRQ
> > > b __guest_exit
> > >
> > > el1_error:
> > > stp x0, x1, [sp, #-16]!
> > > - ldr x1, [sp, #16 + 8]
> > > + get_host_ctxt x0, x1
> > > + get_vcpu x1, x0
> >
> > Given how frequent this construct is, would there be a benefit in
> > having something like "get_vcpu_ptr" that conflates the two macros? We
> > don't seem to have a single case of using get_vcpu on its own.
> >
>
> I think my intention was to make it obvious how we get to the vcpu
> pointer, but looking at it now I don't think this adds anything, so I'm
> happy to adjust. How about adding a get_vcpu_ptr macro which calls the
> other two macros?
Sure, that would make sense.
>
> > > mov x0, #ARM_EXCEPTION_EL1_SERROR
> > > b __guest_exit
> > >
> > > @@ -180,14 +182,7 @@ ENTRY(__hyp_do_panic)
> > > ENDPROC(__hyp_do_panic)
> > >
> > > ENTRY(__hyp_panic)
> > > - /*
> > > - * '=kvm_host_cpu_state' is a host VA from the constant pool, it may
> > > - * not be accessible by this address from EL2, hyp_panic() converts
> > > - * it with kern_hyp_va() before use.
> > > - */
> > > - ldr x0, =kvm_host_cpu_state
> > > - mrs x1, tpidr_el2
> > > - add x0, x0, x1
> > > + get_host_ctxt x0, x1
> > > b hyp_panic
> > > ENDPROC(__hyp_panic)
> > >
> > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > index b991f85c1133..d1749fa0bfc3 100644
> > > --- a/arch/arm64/kvm/hyp/switch.c
> > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > @@ -467,7 +467,7 @@ static hyp_alternate_select(__hyp_call_panic,
> > > __hyp_call_panic_nvhe, __hyp_call_panic_vhe,
> > > ARM64_HAS_VIRT_HOST_EXTN);
> > >
> > > -void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
> > > +void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
> > > {
> > > struct kvm_vcpu *vcpu = NULL;
> > >
> > > @@ -476,9 +476,6 @@ void __hyp_text __noreturn hyp_panic(struct
> > > kvm_cpu_context *__host_ctxt)
> > > u64 par = read_sysreg(par_el1);
> > >
> > > if (read_sysreg(vttbr_el2)) {
> > > - struct kvm_cpu_context *host_ctxt;
> > > -
> > > - host_ctxt = kern_hyp_va(__host_ctxt);
> > > vcpu = host_ctxt->__hyp_running_vcpu;
> > > __timer_disable_traps(vcpu);
> > > __deactivate_traps(vcpu);
> > > diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c
> > > b/arch/arm64/kvm/hyp/sysreg-sr.c
> > > index 2c17afd2be96..43b7dd65e3e6 100644
> > > --- a/arch/arm64/kvm/hyp/sysreg-sr.c
> > > +++ b/arch/arm64/kvm/hyp/sysreg-sr.c
> > > @@ -189,3 +189,8 @@ void __hyp_text __sysreg32_restore_state(struct
> > > kvm_vcpu *vcpu)
> > > if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
> > > write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
> > > }
> > > +
> > > +void __hyp_text __kvm_set_tpidr_el2(u64 tpidr_el2)
> > > +{
> > > + asm("msr tpidr_el2, %0": : "r" (tpidr_el2));
> >
> > The paranoid in me says that we'd want an ISB here if we can possibly
> > use tpidr_el2 on this path. If we had to manic, for example...
> >
>
> I'm not sure I follow. Are you not guaranteed that an mrs after msr
> would reflect the latest written value, even without an ISB?
You're absolutely right. /me dropping paranoia levels.
Thanks,
M.
--
Jazz is not dead, it just smell funny.
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
