Hi Will,

On 3/18/20 9:58 PM, Will Deacon wrote:

> On Fri, Feb 21, 2020 at 04:55:32PM +0000, Andre Przywara wrote:
>> From: Raphael Gault <raphael.ga...@arm.com>
>>
>> The EDK II UEFI firmware implementation requires some storage for the EFI
>> variables, which is typically some flash storage.
>> Since this is already supported on the EDK II side, we add a CFI flash
>> emulation to kvmtool.
>> This is backed by a file, specified via the --flash or -F command line
>> option. Any flash writes done by the guest will immediately be reflected
>> into this file (kvmtool mmap's the file).
>> The flash will be limited to the nearest power-of-2 size, so only the
>> first 2 MB of a 3 MB file will be used.
>>
>> This implements a CFI flash using the "Intel/Sharp extended command
>> set", as specified in:
>> - JEDEC JESD68.01
>> - JEDEC JEP137B
>> - Intel Application Note 646
>> Some gaps in those specs have been filled by looking at real devices and
>> other implementations (QEMU, Linux kernel driver).
>>
>> At the moment this relies on DT to advertise the base address of the
>> flash memory (mapped into the MMIO address space) and is only enabled
>> for ARM/ARM64. The emulation itself is architecture agnostic, though.
>>
>> This is one missing piece toward a working UEFI boot with kvmtool on
>> ARM guests, the other is to provide writable PCI BARs, which is WIP.
>>
>> Signed-off-by: Raphael Gault <raphael.ga...@arm.com>
>> [Andre: rewriting and fixing]
>> Signed-off-by: Andre Przywra <andre.przyw...@arm.com>
>> ---
>> Hi,
>>
>> an update fixing Alexandru's review comments (many thanks for those!)
>> The biggest change code-wise is the split of the MMIO handler into three
>> different functions. Another significant change is the rounding *down* of
>> the present flash file size to the nearest power-of-two, to match flash
>> hardware chips and Linux' expectations.
> Alexandru -- are you happy with this now?

I really appreciate taking the time to look at it, but at the moment I'm busy
testing v3 of the reassignable BARs and PCIE support [1]. I'll try to send the
patches as soon as possible, then I'll review this patch.

[1] https://www.spinics.net/lists/kvm/msg204878.html

Thanks,
Alex
>
> Will
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Reply via email to