On Thu, 26 May 2022 16:30:56 +0100 Alexandru Elisei <alexandru.eli...@arm.com> wrote:
Hi Alex, > I found it very difficult to cross-build kvmtool for all arches because for > some architectures I couldn't get libfdt to install: either dtc wasn't > compiling (x86 machine, Arch Linux, missing yaml.h include when building > for arm and powerpc), or libfdt was not being found by Makefile after > installing it (x86 machine, Debian 11, building for powerpc). It was > possible to compile only libfdt and teach Makefile where to look for it, > which is what I ended up doing, but in my opinion, that's not an ideal user > experience. Meh. Nobody said that userland cross compilation would be a walk in the park, and this approach (cross-compiling and putting in SYSROOT) is the canonical approach. When using a multiarch capable distro, this is easy enough. But I see that this is some major pain point for an otherwise rather "low maintenance" tool, and libfdt is designed to be embedded, so I guess this is fine, with the caveat mentioned below. > This is my attempt at making compilation easier by pulling in the libfdt > library and having kvmtool compile it when an architecture requires it. All > the user needs to do now is to find a suitable cross-compiler toolchain > with glibc included [1]*. > > When making lkvm-static, the static version of libfdt is built (libfdt.a); > for all other make targets the shared library is built. So does that mean that the .so gets shipped with kvmtool? And it should be installed as part of "make install"? I think that might bring up more questions and problems, so do we want to leave the user some choice? - The user brings their own libfdt. This should be the case for any clean userland cross compilation, where you install target libraries in SYSROOT, just for compilation, and have the .so file also on the actual target system. This would also be best for native compilation. Current situation. - The user decides to use the built-in libfdt, in which case that gets always statically linked into the lkvm binary (which might still be dynamically linked against libc), to avoid any conflict between the just built version (.so), and the installed library on the target system. Some projects choose this approach, where it gets decided at build time which version to use ("system library" vs. built-in version). This is either done automatically, because a system library is not found, or using some user provided flag for configure/make. If that sounds too involved, we could just always link in our libfdt copy statically. And later revisit this when people complain. Can you check by how much an otherwise dynamically linked kvmtool binary grows when we link against libfdt.a? Cheers, Andre > This only happens > for those arches that require libfdt (arm, arm64, riscv, powerpc); libfdt > is not built for MIPS and x86. > > I am pretty happy with how libfdt has been integrated with the kvmtool > build system. The only niggle is that the libfdt_clean target echoes the > commands to remove the build artifacts: > > $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean > Makefile:378: Skipping optional libraries: bfd zlib aio > CLEAN (libfdt) > rm -f libfdt/*.o libfdt/libfdt.a libfdt/libfdt-1.6.1.so > rm -f libfdt/libfdt.so.1 > CLEAN > > but I believe that's impossible to change without modifying the libfdt > Makefile, which I don't want to do to keep it as easy as possible to update > libfdt. > > Made some quick measurement about how libfdt affects the build time when > building from a clean directory (incremental builds do not rebuild libfdt): > > - On a rockpro64, on the little core (Cortex-A53), running > > $ time taskset -c 0 make > > with libfdt takes an average of 90.721s (averaged over 3 runs, standard > deviation 0.040s); without libfdt it takes 84.003s (averaged over 3 runs, > stddev of 0.105s). That's a 6.718s absolute increase, or a 7.997% relative > increase. > > - On the same rockpro64, on the big core (Cortex-A72), running > > $ time taskset -c 5 make > > with libfdt takes an average of 45.078s (averaged over 3 runs, stddev of > 0.060s); without libfdt it takes 41.836s (averaged over 3 runs, stddev of > 0.065). That's a 3.242s absolute increase, or a 7.749% relative increase. > > I believe that the ease of use more than justifies the increased > compilation time. > > Testing > ======= > > On x86 host, compiled for x86, MIPS, arm, arm64, powerpc, riscv. Booted an > x86 VM. > > On arm64 host, compiled for arm64 and arm. I tried to cross-compile for > other targets, but I couldn't find a cross-compiler toolchain for arm64 > hosts that included a libc implementation. The arm cross-compiler was > downloaded from the developer.arm.com [2]. Ran kvm-unit-tests for arm64 and > arm (on the arm64 version of kvmtool), and also booted a kernel. > > *only for x86 hosts. > > [1] https://toolchains.bootlin.com/ > [2] > https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads > > Alexandru Elisei (2): > Add libfdt library > INSTALL: Remove all mentions of libfdt > > INSTALL | 27 +- > Makefile | 53 +- > libfdt/.gitignore | 1 + > libfdt/Makefile.libfdt | 18 + > libfdt/TODO | 3 + > libfdt/fdt.c | 335 ++++++ > libfdt/fdt.h | 66 ++ > libfdt/fdt_addresses.c | 101 ++ > libfdt/fdt_check.c | 93 ++ > libfdt/fdt_empty_tree.c | 38 + > libfdt/fdt_overlay.c | 867 +++++++++++++++ > libfdt/fdt_ro.c | 859 +++++++++++++++ > libfdt/fdt_rw.c | 500 +++++++++ > libfdt/fdt_strerror.c | 60 ++ > libfdt/fdt_sw.c | 384 +++++++ > libfdt/fdt_wip.c | 94 ++ > libfdt/libfdt.h | 2147 ++++++++++++++++++++++++++++++++++++++ > libfdt/libfdt_env.h | 96 ++ > libfdt/libfdt_internal.h | 192 ++++ > libfdt/meson.build | 55 + > libfdt/version.lds | 83 ++ > 21 files changed, 6033 insertions(+), 39 deletions(-) > create mode 100644 libfdt/.gitignore > create mode 100644 libfdt/Makefile.libfdt > create mode 100644 libfdt/TODO > create mode 100644 libfdt/fdt.c > create mode 100644 libfdt/fdt.h > create mode 100644 libfdt/fdt_addresses.c > create mode 100644 libfdt/fdt_check.c > create mode 100644 libfdt/fdt_empty_tree.c > create mode 100644 libfdt/fdt_overlay.c > create mode 100644 libfdt/fdt_ro.c > create mode 100644 libfdt/fdt_rw.c > create mode 100644 libfdt/fdt_strerror.c > create mode 100644 libfdt/fdt_sw.c > create mode 100644 libfdt/fdt_wip.c > create mode 100644 libfdt/libfdt.h > create mode 100644 libfdt/libfdt_env.h > create mode 100644 libfdt/libfdt_internal.h > create mode 100644 libfdt/meson.build > create mode 100644 libfdt/version.lds > _______________________________________________ kvmarm mailing list kvmarm@lists.cs.columbia.edu https://lists.cs.columbia.edu/mailman/listinfo/kvmarm