OK I connected PBX to my laptop and opened hyperterminal..
PBX gives SMDR data ok:


  Date     Time   Ext CO     Dial Number      Duration Cost        Acc
code  CD 
--------------------------------------------------------------------------------
07/23/05 06:22PM  100 01 21095175111          00:00'05     0.00EU      
        
07/23/05 06:23PM  100 01 2427024436           00:00'01     0.07EU      
        

so the problem is not with pbx which is a good thing I suppose..

now as I said before the printer is dot-matrix Panasonic KX-P1150.
Unfortunatelly I don't have a cable around to test it with my laptop
but I did a manual print out of printer settings.

It sais:

Emulation: EPSON
Auto LF: OFF
C.S.F.: Disable
Download buffer: Disable
Page length: 11 inch
Code page: PC437 Greek (which is ok since I am in Greece :P)

I can't see anything strange to above settings.. but it still won't
work.. :(


--- John Berry <[EMAIL PROTECTED]> έγραψε:

> Did you check the settings on the printer?? See if you can do a
> printout of
> the current printer config and verify the settings. Then try stepping
> down
> the speed to 4800. I had an 8 year old pin-writer (I think it was an
> Epson)
> than started out at 19kb baud  rate and I had to slow it down over 2
> years
> to 9600 then 4800 to keep it going until it finally died.
> 
> The symptoms you are talking about are those I always get when the
> two are
> not synced up...
> 
> Thank You,
> 
> John Berry
> Lantex Voice & Data Systems
> 
> 



        

        
                
___________________________________________________________ 
Χρησιμοποιείτε Yahoo!; 
Βαρεθήκατε τα ενοχλητικά μηνύματα (spam); Το Yahoo! Mail 
διαθέτει την καλύτερη δυνατή προστασία κατά των ενοχλητικών 
μηνυμάτων http://login.yahoo.com/config/mail?.intl=gr 


_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt

Reply via email to