This may be some simplistic ideas but check it. Make sure the AC cord connected to the TA824 is completely plugged in. I discovered by accident that mine was not completely pushed in and the AC was intermittent. Is this the only programming which you have set up in the system? Even with a power failure all programming should be retained unless there is some RFI causing it to crash and then reboot and defaulting all it's settings. There may also be a problem with the memory battery in the unit which would be a very slim chance. Lastly if it were to crash and return to default settings you should be able to access any CO line from any extension. It sounds as if you have disabled the availability of CO3 for pick up on Ext 110. Is there a proprietary phone set on Extension 104 as well as 110?
At 08:40 PM 9/30/2007, Gary Mull wrote: >I have a very annoying problem with a TA824. My business line comes in on >C03. The PBX is programmed for C03 to only ring on one extension #110. Ever >so often and now more often the PBX appears to loose it's programming for >C03. C03 will not ring on Extension #110 and instead rings on Extension # >104. I can not answer the call on C03 on extension #110 when this happens. >When I press the C03 line it will not let me answer. > > > >The only way I have found to fix the problem is to reload the SW programming >for the 824. Extension #110 has a KXT-7736, Extension #104 has a KTX-7130. >All other extensions ether have a KTX-7130 or a 2500. > > > >Anyone else had a similar problem and a fix vs reloading the SW? > > > > > >Gary Mull > > > > > >[EMAIL PROTECTED] > > > >_________________________________________________________________ >KX-T Mailing list --- http://kxthelp.com/ >Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
