Thanks Donald and all, I know we could change the FWD/DND lamp to "steady" in the later versions of the TD series, guess this is not an option on the TA824.
The thing that was driving me crazy was the DSS buttons were also flashing for all stations with FWD set.....both Steve and Shawn pointed me in the right direction on that one...it's in System,Detail, uncheck DSS lamp mode. Thanks to all who offered assistance...I read TFM, and stared at that computer screen for an hour without seeing it...so much for being old I guess... Jim ----- Original Message ----- From: "Donald R. Resor" <[EMAIL PROTECTED]> To: "KXT help List" <[email protected]> Sent: Tuesday, December 11, 2007 6:58 PM Subject: Re: KX-T: TA824/TVA50 > The busy/no answer setting is supposed to make the FWD/DND LED > flash. However, with a TVA50 connected you do not need to use the > Busy/No Answer setting on the TA824 unless of course you want to > forward to another extension. The TVA50 monitors the extensions via > it's ports with APT for the number of rings you set in it's > parameters before voice mail retrieves the non-answered call and > gives the caller the option to leave a message or try another extension. > > > At 03:42 PM 12/11/2007, you wrote: >>Doing this combination for the first time.....when I set the call >>forwarding for "busy/no answer" both the FWD/DND button and the DSS >>button for that station flash continuously. >> >>Two questions: why does the DSS button even do anything???what's the >>purpose? and is there an option to change from flash to steady on >>the FWD/DND button. >> >>Hey....that's actually three questions isn't it? Any and all help >>much appreciated. >> >>Thanks,Jim > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
